• Journal of Korea Water Resources Association
• /
• v.34 no.5
• /
• pp.449-458
• /
• 2001

In order to verify the numerical model, which was developed to simulate the behavior of the two-phase fluid flow in a single fracture, the characteristic equation of relative permeability was incorporated into the developed numerical model, and the computed results were compared with the experimental results of the model test. As results of the sensitivity analysis on the roughness and the aperture size of fracture, the gas velocity was inversely proportional to the fracture roughness, and not proportional to the square of aperture size which is usually observed in single phase flow in a single fracture. The numerical model was applied to the underground LPG storage terminal in order to check the field applicability. The simultaneous flow of water and gas in accordance with the operation pressures in a single fracture near cavern was simulated by the model. It was shown that the leaked gas was able to be controlled in a single fracture neither by the pressure of operation nor by that of groundwater in case the fracture became smoother in roughness and smaller in aperture size.

• The Journal of the Petrological Society of Korea
• /
• v.16 no.3
• /
• pp.162-179
• /
• 2007

Macheon Layered Intrusion (MLI) which intruded into Precambrian gneiss complex of the northern Jirisan area, southeastern part of Youngnam (or Sobaeksan) Massif, is a layered mafic-ultramafic complex of Triassic age (ca. 223 Ma). The MLI is divided into Layered Series and Laminated Series. Layered Series is subdivided into Central Zone (Lower Zone) consisting of olivine gabbros and Peripheral Zone (Middle or Upper Zone) consisting of hornblende gabbros based on the type of cumulus texture and the main mafic phase. The Central Zone of Layered Series comprises thinly laminated olivine gabbros and uniform or thickly laminated coarse olivine gabbros which consist of mela-gabbro, troctolite, leuco-troctolite, and anorthositic rocks. Laminated Series is also subdivided into quartz-bearing biotite-pyroxene gabbros and homblende diorite and both have variable amount of interstitial quartz and microcline. Laminated series display moderately to slightly developed igneous lamination which is defined by the planar alignment of lath-shape plagioclases. Chilled margin of quartz-bearing biotite-pyroxene gabbro with surrounding Precambrian gneisses insists shallower intrusion of more felsic cognate magma evolved in the deep a little later. Rocks of Layered Series have orthocumulus to adcumulus olivine, adcumulus to intercumulus plagioclase, and intercumulus to heteradcumulus pyroxene and hornblende. Magmatic modally grading, folding, and cross-lamination are not rarely occurred in thinly layered rocks. These textural characteristics define main mechanisms of the formation of layered and laminated structure in mafic-ultramafic rocks of Macheon Layered Intrusion are gravity settling and in-situ crystallization associated with slumping and density current.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.221-226
• /
• 2000

In this study, the characteristics of gas-water relative permeability curves in a single fractured-plate according to the various aperture size were analyzed by using the Hele-Shaw type glass plate model. The plate was made of glasses for the observation of the two-phase flow pattern, and seven cases were set up based on the aperture size in the range of field scale from 30 to $120\mum$. The experiment was conducted by steady-state method, and the water saturation was determined more accurately by the developed digital image process technique. The empirical equations of relative permeability to gas and water for single fractured-plate were correlated by using the aperture size which directly affects the two-phase flow pattern and critical saturation.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.9
• /
• pp.19-28
• /
• 2014

It is necessary to understand the behavior of the soils for the dredging constructions. The objective of this study is to estimate void ratio and density changes of the dredged soils by using the geophysical testing methods. A series of laboratory tests is performed to obtain geotechnical index properties of the specimen, retrieved from the west coastal of Korea. The sedimentation and self-weight consolidation tests are carried out with observing changes of the interfacial height and the elastic wave velocities. The same amounts of the soils are poured into the testing column at intervals of 12 hours until the interheight reaches to a certain level. After the completion of the sedimentatation and self-weight consolidation tests, downward permeability test is performed to assess a tidal influence in the nearshore. The mini resistance cone is penetrated into the specimen to measure the electrical resistivity with depth. All tests are completely finished, the weight of specimens are measured to calculate the void ratio with the depth. Experimental results show that the aspects of the self-weight consolidation are invisible during dredging process because of rapid sedimentation characteristics of ML. However, the elastic wave velocities increase with increasing in the effective stresses. During permeability test, measured permeability and the elastic wave velocities maintain almost identical values. Void ratio based on the elastic wave velocities changes linearly with time during the step dumpings. Void ratio estimated by the electrical resistivity represents the repeatedly layered depositions according to the step-by-step dumpings. Void ratio determined by soil sampling is similar to those of elastic waves and electrical resistivity profiles. This experimental study demonstrates that the geophysical testing methods may be an effective method for evaluating the behavior of dredged soils.

• Journal of Korea Water Resources Association
• /
• v.34 no.5
• /
• pp.439-448
• /
• 2001

A two-dimensional finite difference numerical model was developed in order to simulate two-phase fluid flow in a single fracture. In the model, variation of viscosity with pressure and that of relative permeability with water saturation can be treated. For the numerical solution, IMPES method was used, from which the pressure and the saturation of water and gas were computed one by one. Seven cases of model test using parallel plates for a single fracture were performed in order to obtain the characteristic equation of relative permeability which would be used in the numerical model. it was difficult to match the characteristic curves of relative permeability from the model tests with the existing emperical equations, consequently a logistic equation was proposed. As the equation is composed of the parameters involving aperture size, it can be applied to any fracture.

• Korean Journal of Ichthyology
• /
• v.10 no.2
• /
• pp.231-240
• /
• 1998

The characteristics of cranium, vertebral column and fin supports of Acanthorhodeus gracilis were examined. The fish did not have a fontanell in cranium nor process of supraethmoid. It had double orbitosphenoids and a basioccipital process developed from anterior portion of basioccipital. It had a high and triangular dorsal process on supraoccipital. In the urohyal, hypohyal attachment was bifurcated and horizontal and vertical plate were in an elongated rhombus shape with posterior edge pointed. It had teeth of 1-rowed, 5/5 and 4 free teeth. The fish did not have a coracoid foramen on shoulder girdle. It does not have a uroneural on ural centrum. It had a long and slender posterior process of pelvic bone. It had a large and flat supraneural. The fish had 14 or 15 interneural spines, of which the 1st, 2nd, 3rd and 4th had single basiosts and the rest had double basiosts. It had 11 or 12 interhemal spines, of which the 1st, 2nd, 3rd and 4th had single basiosts and the rest had double basiosts.

• Journal of the Korean Ceramic Society
• /
• v.38 no.8
• /
• pp.732-739
• /
• 2001

산업부산자원으로부터 유입되는 중금속이 시멘트 수화반응에 미치는 영향에 대하여 연구하였다. 출발물질은 순수시약을 사용하여 $C_3$S와 $C_2$S 조성으로 배합하고 여기에 Zn, Cu, Cr의 중금속 산화물을 1000ppm, 2000ppm, 3000ppm 첨가하여 150$0^{\circ}C$에서 1시간 소결하여 중금속의 고용분배, 결정구조, 용출상태 그리고 수화열을 관찰하였다. 중금속중 Zn는 $C_3$S와 간극질에 집중 고용되고 Cu는 간극물질에 집중 고용되며 Cr은 $C_3$S와 $C_2$S에 집중 고용되었다. 광학현미경 및 XRD 관찰결과 중금속 함량별로 $C_3$S와 $C_2$S의 결정상에는 큰 영향이 없는 것으로 나타났다. 그리고 7일간 수화시 Zn는 40~50%, Cu와 Cr은 전량 용출되었다. Conduction calorimeter 분석결과 중금속 함량별 변화에도 $C_3$S와 $C_2$S 수화열에는 차이가 없었다.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.6
• /
• pp.15-21
• /
• 2000

본 논문은 체적이 변하는 흙에 대하여 새로운 흙-수분 특성곡선 이론을 제시하고 이를 실험적으로 규명하였다. 그 결과, 점토와 같이 불포화되는 과정중 체적변형이 발생하는 흙의 흙-수분 특성곡선은 간극비와 흡인력의 함수이므로 체적변화를 무시할 수 없음이 밝혀졌다. 따라서 본 논문에서는 체적변화가 있는 경우 흙-수분특성곡선을 구하기 위하여 두가지 실험법을 채택하였다. 그 첫째는 전통적인 압력판 추출시험과, 중량함수비와 간극비와의 관계를 알 수 있는 수축한계시험을 실시하여 조합하는 방법이며, 둘째 방법은 압력판 셀을 새로인 고안하여 추출시험시에 체적 수축도 측정할 수 있는 수정된 압력판 셀 시험방법을 이용하는 것이다. 이 시험결과를 3차원 상의 면(surface)에서 표현하여, 체적변형을 고려한 흙-수분 특성을 규명할수 있도록 하였다.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.93-105
• /
• 2001

해성토층(풍화토 및 모래질 충적토가 암반 위에 쌓인) 위에 준설매립된 수도권 해안매립지역에서 원형의 대심도 굴착공사로 인하여 발생하는 지중연속벽의 수평변위에 대한 현장계측을 중심으로 연구를 수행하였다. 현장측정으로는 지중연속벽의 8방향에서 벽체수평변위와 철근응력, 토압, 간극수압 등이 측정되었고, 정확한 측정결과를 얻기 위하여 합리적인 해석 및 보정방법이 연구되었다. 현장측정결과 굴착시공단계에 따라서 벽체수평변위가 증가하였으며, 일정깊이에 존재하는 점토층을 굴착함으로써 간극수압의 급격한 변화가 측정되었다. 한편, 굴착전후의 구속압감소에 따른 지반물성치의 변화를 정리하였다. 굴착전후의 탄성계수는 일정깊이까지 상당한 정도로 감소됨을 알 수 있었고 굴착전후 여러 가지 시험방법에 따른 탄성계수의 차이들을 비교하였다.

• Journal of the Korea Concrete Institute
• /
• v.24 no.1
• /
• pp.37-44
• /
• 2012

Recently, due to developments in construction technology, the use of high-performance concrete became popular. High-performance concrete when compared to the ordinary concrete can better satisfy required performances by using mineral admixture and superplasticizer. Various studies on the effect of admixture materials on the quality of high-performance concrete have been reported. But there exist limited number of reported results on the effect of cement qualities, which is the most important constituent material in concrete. Therefore, in this study, the relationship between the quality of cement and the flowability of high flowing concrete is investigated. Qualities of domestically produced cement were identified, and then the influence of the qualities of cement on the flowability of high flowing concrete is evaluated. The result showed that the dosage of required superplasticizer was dependent on cement fineness, to brain, free-CaO, and interstitial phase, which all trigger initial hydration process of cement. Particularly, the results showed that fineness of cement has a high impact on the dosage of the superplasticizer. For strength property of concrete, the dosage of superplasticizer had a significant effect on the early age strength, but had negligible effect in the long term strength.