• The Journal of the Petrological Society of Korea
• /
• v.26 no.1
• /
• pp.45-54
• /
• 2017

The characteristics of the rock cleavage in Jurassic Geochang granite were analysed using the distribution of microcrack lengths and spacings. The phases of distribution of the above lengths and spacings were derived from the enlarged photomicrographs(${\times}6.7$) of the thin section. First, the length and spacing-cumulative diagrams for the six directions of rock cleavages were arranged in increasing order($H2{\rightarrow}R1$) on the density(${\rho}$) of microcrack length. The various parameters were extracted through the combination of the above two types of diagrams. The discrimination factors representing the three quarrying planes and three rock cleavages were acquired through the mutual contrast between the values of parameters. The analysis results of the research are summarized as follows. The evaluation for the six directions of rock cleavages was performed using the parameters such as (1) intersection angle(${\alpha}-{\beta}$) and (2) exponent difference(${\lambda}_S-{\lambda}_L$) between two exponential straight lines related to spacing(${\alpha}$, ${\lambda}_S$) and length(${\beta}$, ${\lambda}_L$). The values of parameters(1 and 2) are in order of H(hardway, (H1 + H2)/2) < G(grain, (G1 + G2)/2) < R(rift, (R1 + R2)/2). On the contrary, the values of the above two parameters for three planes are in order of R < G < H. Meanwhile, the direction of convergence between two exponential straight lines was derived. The above direction is compliant to arrangement of the line os' centering around the line ol. The above two lines converge in the direction of the Y-axis when the line ol and line os' occupy the upper region on the left and the lower region on the right, respectively(R-type). On the contrary, the above two lines converge in the direction of the X-axis when the order of arrangement between line ol and line os' is reversed(H-type). Especially, the positive(+) or negative(-) value of intersection angle(${\alpha}-{\beta}$) is determined by the arrangement of two vertical lines. This type of correlation analysis is useful for evaluating the relative strength of rock cleavage and discriminating three quarrying planes.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1999.11a
• /
• pp.427-432
• /
• 1999

지금까지 감성측정은 심박 변화율, 피부저항, 피부온도 등의 생리 신호를 측정하고 그 신호를 이용하여 비교, 분석하여 왔다. 심박 변화율, 피부저항, 피부온도와 마찬가지로 자율신경계 반응의 하나로써 맥파 또한 인간의 감성을 평가하는 한 파라미터가 될 수 있음을 예상하고 본 연구를 수행하였다. 건강한 피험자 5명을 상대로 긍정과 부정 시각 자극을 각각 주어서 심박 변화율과 맥파의 생리신호를 측정한 후 그 동안 발표되었던 심박 변화율의 결과를 기준으로 맥파의 결과와 비교, 분석하였다. 그 결과 평균 R-R 간격의 변화율과 맥파의 최고점 평균 시간 간격의 변화율 그리고 맥파의 최대 기울기점 사이의 시간 간격의 변화율이 유사함을 알 수 있었다. 또한 맥파의 Baseline Deflection 과 Amplitude를 이용하여 감성 측정을 시도하였다. 긍정 시각 자극에 비해 부정 시각 자극 일 때 맥파의 최고점 및 최대 기울기점의 평균 시간 간격은 감소하였고, Baseline Deflection은 증가하였고, Amplitude 는 감소하였다. 이는 부정시각 자극이 교감신경계를 활성화시킴을 보여 주는 것이다. 본 연구를 통하여 맥파도 자율 신경계의 반응을 대면하는 생리신호로써 감성 측정에 유용한 도구임을 검증할 수 있었다.

• Tunnel and Underground Space
• /
• v.22 no.3
• /
• pp.196-204
• /
• 2012

Quantification of roughness plays an important role in modeling strength deformability and fluid flow behaviors of rock joints. A procedure was suggested to simulate joint roughness, and characteristics of the roughness was investigated in this study. Stationary fractional Brownian profiles with known input values of the fractal parameter and other profile properties were generated based on random midpoint displacement method. Also, a procedure to simulate three dimensional roughness surface was suggested using the random midpoint displacement method. Selected statistical roughness parameters were calculated for the generated self-affine profiles to investigate the attribute of roughness. Obtained results show that statistical parameters applied in this study were able to consider correlation structure and amplitude of the profiles. However, effect of data density should be tackled to use statistical parameters for roughness quantification.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.304-309
• /
• 2002

We propose the computation reduction method of real root method that is mainly used in the CELP (Code Excited Linear Prediction) vocoder. The real root method is that if polynomial equations have the real roots, we are able to find those and transform them into LSP. However, this method takes much time to compute, because the root searching is processed sequentially in frequency region. In this paper, to reduce the computation time of real root, we compare the real root method with two methods. In first method, we use the mal scale of searching frequency region that is linear below 1 kHz and logarithmic above. In second method, The searching frequency region and searching interval are ordered by each coefficient's distribution. In order to compare real root method with proposed methods, we measured the following two. First, we compared the position of transformed LSP (Line Spectrum Pairs) parameters in the proposed methods with these of real root method. Second, we measured how long computation time is reduced. The experimental results of both methods that the searching time was reduced by about 47% in average without the change of LSP parameters.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.8
• /
• pp.61-67
• /
• 2010

A characterization procedure for analyzing symmetric coupled MIS(Metal-Insulator-Semiconductor) transmission line is used the same procedure as a general single layer symmetric coupled line with perfect dielectric substrate from the extraction of the characteristic impedance and propagation constant for even- and odd-mode. In this paper, an analysis for a new substrate shielding symmetric coupled MIS structure consisting of grounded crossbar at the interface between Si and SiO2 layer using the Finite-Difference Time-Domain (FDTD) method is presented. In order to reduce the substrate effects on the transmission line characteristics, a shielding structure consisting of grounded crossbar lines over time-domain signal has been examined. Symmetric coupled MIS transmission line parameters for even- and odd-mode are investigated as the functions of frequency, and the extracted distributed frequency-dependent transmission line parameters and corresponding equivalent circuit parameters as well as quality factor for the new MIS crossbar embedded structure are also presented. It is shown that the quality factor of the symmetric coupled transmission line can be improved without significant change in the characteristic impedance and effective dielectric constant.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.12 s.354
• /
• pp.83-88
• /
• 2006

In this paper, we propose a new cross bar embedded structure for improvement of attenuation characteristics along the different lossy media. A general characterization procedure based on the extraction of the characteristic impedance and propagation constant for analyzing a single MIS(Metal-Insulator-Semiconductor) transmission line used and an analysis for a new substrate shielding MIS structure consisting of grounded crossbars at the interface between Si and Sio2 layer using the Finite-Difference Time-Domain(FDTD) technique is used. In order to reduce the substrate effects on the transmission line characteristics, a shielding structure consisting of grounded cross bar lines over time-domain signal has been examined. The extracted, distributed frequency-dependent transmission line parameters as well as the line voltages and currents, and also corresponding equivalent circuit parameters have been examined as function of frequency. It is shown that the quality factor of the transmission line can be improved without significant changes in the characteristic impedance and effective dielectric constant.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.8
• /
• pp.1086-1094
• /
• 2020

AThis paper measured real sea area for performance analysis according to distance from west sea and south sea of Korea. The performance of the underwater OFDM system was analyzed by comparing the performance of the West and South Seas by adjusting the number of data repetitive transmissions and the pilot symbol placement interval parameters based on the real-sea data measured from the distance and Data rate of the West and South Sea vessels. In conclusion, when comparing the performance of the South Sea at the Data rate and distance, the BER performance of the South Sea was similar at the 5 km South Sea and 1 km West Sea under the same conditions. Placement interval of pilot symbol at 10 km of South Sea and 3 km of West Sea is (𝚫f, 𝚫t) = (6, 3) and the number of times the PRB is (R_f, R_t) = (2, 1) repeated. We confirmed that we can send high data over long distances in the South Sea.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9B
• /
• pp.1527-1533
• /
• 2000

Basically, a general characterization procedure based on the extraction of the characteristic impedance and propagation constant for analyzing a single MIS(Metal-Insulator-Semiconductor) transmission line is used. In this paper, an analysis for a new substrate shielding MIS structure consisting of grounded cross-bars at the interface between Si and SiO2 layer using the Finite-Difference Time-Domain (FDTD) method is presented. In order to reduce the substrate effects on the transmission line characteristics, a shielding structure consisting of grounded cross bar lines over time-domain signal has been examined. The extracted distributed frequency-dependent transmission line parameters and corresponding equivalent circuit parameters as well as quality factor have been examined as functions of cross-bar spacing and frequency. It is shown that the quality factor of the transmission line can be improved without significant change in the characteristic impedance and effectve dielectric constant.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.177-179
• /
• 2011

최근 표준화가 진행되고 있는 HEVC는 H.264/AVC의 기본 구조를 유지하면서 각 부호화기의 성능을 향상시키는 방향으로 진행되고 있다. 기존의 H.264/AVC는 화면 간 예측에서 예측 정보를 보내지 않고 복호화가 가능한 SKIP 모드와 예측 정보를 보내주는 화면 간 예측 모드들을 사용한다. 그런데 SKIP 모드는 율-왜곡 측면에서 극단적인 특성을 갖기 때문에 SKIP 모드와 다른 화면 간 예측 모드들 사이에 넓은 율-왜곡 파라미터 간격이 존재하며, 이는 화질 저하의 원인이 된다. 본 논문에서는 HEVC에서도 동일한 문제점이 존재하는지 분석하기 위해 SKIP 모드와 화면 간 예측 모드들의 율-왜곡 파라미터에 대한 분석을 수행하였다. 분석 결과를 바탕으로 HEVC에서도 부호화 효율을 향상시키기 위하여 새로운 화면 간 예측 모드가 필요함을 보였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.200-203
• /
• 2007

Devices of junction barrier schottky(JBS) structure using 4H-SiC substrates with wide energy band gaps was designed and fabricated. As a measurement results, the device of reverse I-V characteristics was shown as more than 1000 V, its design optimum length of p-grid was $3{\mu}m$ space. In this paper, I-V characteristics was modeled by using of device fabricated process conditions parameters and it was extracted that the I-V property parameters, and it was compared and analyzed with between device parameters and model parameters.