• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.1
• /
• pp.63-70
• /
• 1983

Recently, many studies for developing the underwater welding techniques have been carried out in the advanced countries as a manufacturing process and a repairing method according as a great deal of interest in development for various marine industrial fields has been gradually increased. But no study on such underwater welding is available at present in our country. In this study, underwater welding was carried out for welding of domestic structural steel plates (SM41A) of 10 mm thickness, using six types of domestic coated arc welding electrodes on a self-made gravity type underwater welding device, resulting in investigation for the underwater weldability of the domestic structural steel plates as well as for the underwater welding properties and practicability of the domestic welding electrodes.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.959-968
• /
• 2022

In this paper, we intend to develop a cart with the convenience of moving objects or items that are difficult to hold by the hand of the disabled and the elderly from outdoor activities to a moving location. Using GPS module, DC motor, Bluetooth module, magnetometer sensor, and Blynk application, the smart follow cart was programmed to accurately know the owner's location while following the cart. The values of latitude and longitude of the magnetometer sensor are set so that the correct leverage value can be obtained in the lead for fine adjustment of the start and stop angles so that the user's position can be freely detected. The above motor driver L298n was connected to the motor to drive the DC motor at a fine angle. A smart follow cart was implemented that receives location signals according to the direction of the owner by turning on/off the mobile phone app as a switching role by connecting the GPS through Bluetooth wireless communication using a smartphone.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.178-178
• /
• 2022

일반적으로 하천은 상류에서 하류로 흐르지만, 하구에서 일어나는 해안으로부터의 염수의 역류 혹은 상류에서 홍수 발생 시 순간적으로 나타나는 역류 등 주 흐름을 거스르는 흐름이 종종 발생하는데 이는 예상치 못한 피해를 가져올 수 있으므로 최대한 방지해야 한다. 즉, 양방향 흐름이 일어나는 지역을 단방향 흐름으로 바꿔줄 수 있는 수리 구조물의 설치가 필요하다. 역방향 흐름을 제어하는 대표적인 예로는 보가 있는데, 보는 충분한 수위 확보뿐만 아니라 하구에서 역류하는 해수를 방지하는 역할도 한다. 다만, 상류와 하류를 수직적으로 분리함에 따라 물고기의 자유로운 이동을 제한하는 등 생태계를 단절시키는 부작용이 나타날 뿐만 아니라, 최근 정부의 정책에 따라 세종보, 죽산보 등의 보 해체 결정이 이루어지면서 이를 대체할 방안이 필요하다. 따라서 이번 연구에서는 수직적인 구조물이 아닌 수평적인 수리 구조물을 고안함으로써 생태계에 큰 영향을 주지 않으면서 가장 효과적으로 양방향 흐름을 제어할 수 있는 구조물 설계 모형을 탐구해보았다. 구조물 설계 아이디어는 심장의 판막에서 고안하였다. 판막은 특정한 방향성을 갖는 구조로 이루어져 있으면서 혈액의 역류를 방지하는 기관으로, 비슷한 방식으로 하천에도 특정 각도를 갖는 구조물의 설치를 통해 단방향 흐름을 유도할 수 있다고 판단하였다. 실제 하천 규모에서의 실험은 불가능하다고 판단, 전산 유체 프로그램 OpenFOAM을 이용하여 가상 수로의 모델링을 진행하였다. 얇은 판 형태의 흐름 제어 구조물을 수로 측면에 각각 설치 후, 같은 조건에서 정방향 흐름과 역방향 흐름에 대해 각각 시뮬레이션을 진행하였다. 이때, 두 흐름의 하류 유량 크기의 차이를 단방향 흐름을 정량화하는 수치로 산정한다. 시뮬레이션은 구조물과 흐름 방향이 이루는 각도, 구조물의 개수 및 간격, 구조물의 비대칭성 등 여러 가지 조건을 바꿔가면서 진행하고, 유속 분포 및 후류의 크기 등의 수리학적 현상을 파악하여 계산 결과를 분석한다. 분석 결과를 바탕으로 하류의 유량 차이가 가장 크게 나타나는 수리 구조물의 조건을 결정하고, 해당 구조물의 실제 적용 가능 여부를 판단한다.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.2
• /
• pp.139-144
• /
• 2013

Various types of disease in the nervous and musculoskeletal system can change gait, and the gait analysis is very important in determining the progression of the disease. Most methods of analyzing gait are subject to high-priced equipment and spatial restrictions. This study used smart phone images and the walking track analysis program to make a comparative analysis with the existing gait analysis on the basis of the stride length measurements and the changes in the knee joint angle for walking. The test necessary to analyze gait was conducted in seven healthy men, and data about the angle of right and left knee joints and stride length were used to analyze gait. The gait analysis in this study obtained the similar results to the existing ones. The use of the methods suggested in this study will enable gait analysis to be made without high-priced equipment and spatial restrictions.

• Journal of the wind engineering institute of Korea
• /
• v.22 no.4
• /
• pp.163-169
• /
• 2018

In this study, wind loads exerted on the offshore wind turbine rotor in parked condition were predicted with variations of wind speeds, yaw angles, azimuth angle, pitch angles, and power of the atmospheric boundary layer profile. The calculated wind loads using blade element theorem were compared with those of estimated aerodynamic loads for the simplified blade shape. Wind loads for an NREL's 5 MW scaled offshore wind turbine rotor were also compared with those of NREL's FAST results for more verification. All of the 6-component wind loads including forces and moments along the three axis were represented on a non-rotating coordinate system fixed at the apex of rotor hub. The calculated wind loads are applicable for the dynamic analysis of the wind turbine system, or obtaining the over-turning moment at the foundation of support structure for wind turbine system.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.418-421
• /
• 2009

This paper presents a human-machine interaction based on a realtime upper limb motion prediction method using surface electromyography (sEMG). The motions were predicted using an artificial neural network algorithm and sEMG signals which are acquired from five muscles, and then a manipulator was controlled to follow after the predicted motions. Upper limb motions were restricted to 2D vertical plane with the contact condition between a user and an end-effector of manipulator. In order to demonstrate the feasibility of the proposed method, experiments using developed method and using a goniometer were performed. The results showed that the proposed real-time motion prediction method can be implemented a human-machine interaction system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.4
• /
• pp.47-53
• /
• 2006

In this paper, the thermal insulator structure of a real rocket which is fabricated in a way that laminated composite rings are connected in series is analyzed using 3-dimensional axisymmetric finite element models. Simulation of cowl zone using a real operating conditions provides that the stress distribution in the laminated composite ring is largely influenced by ply-angles, axial dimensions, and boundary conditions. Notably the plylift that is the precursor to the wedge-out occurs in the ring-to-ring bonding region. It is hypothesized that after the plylift the wedge is dropped out due to the shear stresses in the ply-angle direction and axial compressive stresses.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.30 no.2
• /
• pp.58-67
• /
• 2018

This study investigated the effect of variation in the angle of the elliptic cylinder as well as the presence of circular cylinder on natural convection inside a square enclosure. The Rayleigh number was varied between $10^3$ and $10^6$, and the Prandtl number was fixed to 0.7. In the present study, the angle of the elliptic cylinder was changed from $0^{\circ}$ to $90^{\circ}$, and the perimeter of the elliptic cylinder was same as that of the circular cylinder. The immersed boundary method was used to capture the virtual wall boundary of the inner cylinder. With the increasing angle of the elliptic cylinder, the surface-averaged Nusselt numbers on the cylinder and the enclosure increased. In the Rayleigh number range considered in the present study, the surface-averaged Nusselt number on the elliptic cylinder over = $45^{\circ}$ was higher than that of the circular cylinder. The effect of elliptic cylinder's angle on natural convection in the enclosure was analyzed according to the flow and thermal fields, and the distributions of the Nusselt number.

• Korean Journal of Optics and Photonics
• /
• v.11 no.4
• /
• pp.250-254
• /
• 2000

We have constructed laser Doppler velocimetry system using self-mixing effect with a semiconductor laser. This technology is based on the frequency mixing phenomena which occurs when light scattered back from the moving object into the laser cavity interferes with light inside the laser. We have compared the value of Doppler shifted frequency with the velocity variation of the wheel. Frequency dependence on the angle between the moving direction of rotating aluminum wheel and the incident beam also have been proved. As an illustration of the performance of the velocimeter, velocity measurements of a rotating disk are described. Doppler signal shows a good linear relationship with velocity of rotating disk.

• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.100-105
• /
• 1994

We have reduced the oscillating linewidth of the commercial single mode InGaAsP visible laser diodes which emits in the 657 nm region of the spectrum down to 10 MHz by making a extended cavity employing the Littrow-type grating. The wavelength tuning characteristics of the commercial visible laser diode (CQL820D, Philips Co.) for the grating angle, laser temperature, and injection currents were measured by using the wavemeter. The proportional coefficients of the laser were found to be 1 THzlmrad, 32.4 GHz/K, and 6.14 GHz/mA, respectively.tively.