• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.324-324
• /
• 2018

지구 온난화로 인한 기후변화로 점차 가속됨에 따라 이로 인한 수자원 관리의 취약성이 증가되고 있는 전망이다. 물수지 순환에서 지하수와 증발산은 수자원 총량에서 많은 부분을 차지하고 있는 인자로써, 두 인자의 정량적인 분석은 지표와 대기 시스템의 분석에서 필수적이라고 할 수 있다. 지구의 담수 중 약 30%를 차지하고 있는 것이 지하수로써 이는 토양의 수원으로도 작용할 수 있으며, 특히 지하수면이 토양과 가까울수록 토양수분에 상당한 영향을 미칠 뿐만 아니라 증발산의 변동성과도 밀접하게 연결되어 있다. 지하수위 및 수문인자의 변화는 지하수를 활용하는 농업 및 수자원 관리와도 연계되어 있으므로 지하수와 증발산의 연관성에 대한 정량적인 변화의 비교/분석이 필수적이다. 또한 식생의 종류에 따른 지하수 및 증발산의 거동이 달라지게 됨으로 이에 대한 영향 또한 고려해야 한다. 그러나 지하수와 증발산의 직접적인 관계를 규명하는 선행연구가 아직 미흡하며, 국내 수자원분야에서의 두 인자간의 직접적인 연관성에 대하여 밝힌 연구는 거의 전무한 실정이다. 따라서 본 연구에서는 국내 플럭스 타워 관측 지점 중 다른 지표 특성 및 식생 조건을 가진 지역을 선정하여 각 다른 특성의 관측 지점에서의 분석을 실시하고자 한다. 관측된 수문기상인자인 증발산, 강수량과 관측 지점에서 가장 가까운 지하수 측정망으로부터 획득된 지하수 자료를 활용하여 각 인자들 사이의 연관성을 비교/분석을 실시하여 수문순환에서의 이들 간의 영향 정도를 파악할 예정이다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.6
• /
• pp.393-400
• /
• 2022

The Divert and Attitude Control System(DACS) used in high-altitude engagements is expensive and complex. In this paper, we design a high-altitude terminal guidance and control loop of guided-missile equipped with a Thrust Vector Control(TVC) that is less expensive and simpler than DACS. The proposed system utilizes a quaternion feedback control technique to track the thrust attitude command converted from the acceleration command of true proportional navigation guidance. The performance analysis of the proposed terminal guidance and control loop is conducted through engagement simulations against ballistic targets at a high altitude.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.311-312
• /
• 2021

본 연구는 실내외 자전거 운동 시 빈번히 발생하고 있는 무릎상해를 예방하기 위해 자전거 운동을 실시할 때 올바른 자세를 유지 할 수 있도록 도와주는 보호 장비 개발 내용이다. 자전거 운동 시 발생할 수 있는 손상을 예방하기 위해서는 안장의 높이, 좌우 무릎사이의 간격, 무릎 각도가 안전한 각도 범위내에 있어야 한다. 본 연구에서는 이러한 무릎의 올바른 정렬을 유지한 채 운동을 지속할 수 있도록 센서부와 제어기로 구성되는 것을 특징으로 한다. 센서부는 가속도 센서, 자이로 센서, 속도감지 센서로 구성하여 자전거 운동 시 정상적인 무릎정렬과 비교하여 올바르지 못한 정렬 상태에서 운동 시 즉시 피드백하여 자세를 수정할 수 있도록 유도해 무릎의 상해를 예방하는 실내외 자전거 이용 시 운동 상해를 예방하기 위한 무릎 보호대를 개발하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.1967-1974
• /
• 1991

When the functional electrical stimulation is employed to recover mobility to the plegic, it is very important to understand functions of the selected muscles. I have investigated how a muscle acts to accelerate the body segments, since the body segements are connected by joints so that contraction of a muscle not only rotates the segments to which it is attached but also causes other segments to rotate by creation a reaction force at every joint, which is called the inertial coupling. I found that a single-joint muscle always acts to accelerate the spanned joint in the same direction as the joint torque produced by the muscle. However, a double-joint muscle can act to accelerate the spanned joint in the opposite direction to the joint torque produced by the muscle depending on (1) the body position, (2) the body-segmental parameters, and (3) the type of the movement. Investigating the condition number of the inertia matrix of the body-segmental model gave us some insights into how controllable the body-segmental system is for different values of the factors mentioned above. The results suggested that the upright position is the most undesirable position to independently control the three segments(trunk, thigh and shank) and that the controllability is the most sensitive to variation of the shank length and the trunk mass, which implies that accuracy is required particularly when we estimate these two body-segmental parameters before the paralyzed muscles are innervated by using electrical stimulation.

• Tunnel and Underground Space
• /
• v.23 no.5
• /
• pp.392-400
• /
• 2013

Joint sets should be considered as an influence factor, when location of subsidence zone by stopes is predicted. And the mechanical properties and distribution patterns of joint set above stopes may be affecting subsidence occurrence. In this study, therefore, the orientation of joint sets is reanalyzed with the data from the previous research on prediction of defining the subsidence zone. From a correlated analysis, the influence of major joint set($J_1$) on subsidence location was analyzed by comparing the angle of assumption with the angle of major joint set($J_1$).

• Journal of the Korean Ceramic Society
• /
• v.37 no.11
• /
• pp.1084-1090
• /
• 2000

(Bi$_2$O$_2$)$^{2+}$층 사이에 두 개의 Ta-O 팔면체로 연결된 Bi 계의 층상 페로브스카이트 구조인 SrBi$_2$Ta$_2$O$_{9}$ (SBT) 박막을 XPS를 이용하여 깊이별 화학 상태 변화를 분석하였다. 아르곤 이온으로 SBT 박막을 식각하면, SBT 박막의 각 구성물들은 가속 Ar$^{+}$ 이온의 에너지에 따라 변화한다. SBT 각 구성물 중 Sr 3d의 화학 상태는 Ar$^{+}$ 이온의 에너지변화에 따라 근소하게 변화한다. 반면에, Ta 4f와 Bi 4f의 화학 상태 변화는 인가되는 Ar$^{+}$ 이온 에너지에 확실하게 의존한다. 특히, Bi 4f는 Sr과 Ta에 비해 낮은 Ar$^{+}$ 이온 에너지에서도 Bi-O의 화학 상태가 금속 Bi 화학 상태로 현저하게 변화한다. 이러한 SBT 박막의 화학 상태 변화는 산호 원자의 선택적인 식각 때문에 발생하며 선택적인 식각은 SBT 박막 내에서 각 구성물과 산소간의 질량 차이와 각 구성물의 열적 안정성에 의존함을 알 수 있다.

• Tribology and Lubricants
• /
• v.39 no.5
• /
• pp.203-211
• /
• 2023

This study experimentally investigates the effects of angular acceleration on the friction and wear performances of a gas foil thrust bearing (GFTB) using a typical GFTB with six pads. The outer radius of the bearing is 31.5 mm, the total bearing area is 2,041 mm² , and the bump foil and incline (ramp) height are both 500 ㎛. The newly developed GFTB test rig for measuring the friction torque and coefficient measures the axial load, drag torque, lift-off speed, and touch-down speed. The experiment is conducted for angular accelerations of 78.5, 314.2, and 328.3 rad/s² at axial loads of 5, 10, and 15 N, respectively. The test shows that the start-up friction coefficient increases with increasing axial load at the same angular acceleration, and the friction coefficient decreases with increasing angular acceleration under the same axial load. As the angular acceleration increases, the lift-off speed at the motor start-up increases, and the touch-down speed at the motor stop decreases. The wear distance of the GFTB for a single on/off cycle increases with increasing axial load at the same angular acceleration and decreases nonlinearly with increasing angular acceleration under the same axial load. The test results suggest that adjusting the rotational angular acceleration helps reduce bearing friction and wear.

• Restorative Dentistry and Endodontics
• /
• v.33 no.4
• /
• pp.389-396
• /
• 2008

The purpose of this study was to evaluate the color stability of resin cements with accelerated test. Four dual curing resin cements: Panavia-F (KURARAY). Duolink (BISCO), Variolink-II (Ivoclar Vivadent), and RelyX Unicem (3M ESPE) and 1 self curing resin cement: Resiment CE (j. l. Blosser) were used in this study. In control group, Gradia Anterior (GC) composite resin and Tescera Dentin (Bisco) indirect composite were used. Ten disk shape specimens were made from each resin cement. The specimens were subjected to an accelerated aging process in a refrigerated bath circulator at 60$^{\circ}C$ for 15 and 30 days. Spectrophotometric analyses were made before and after 15 days and 30 days of accelerated aging time. The color characteristics ($L^*,\;a^*,\;b^*$) and the color difference (${\Delta}E^*$) of the specimens before and after immersion were measured and computed. Regardless of type of the resin cements, $L^*$ value was decreased and $a^*$ value was increased, but there were no significant difference. But $b^*$ value was increased significantly (p < 0.05). Tescera inlay showed least color change (p < 0.05), but Gradia showed notable color change after 15 days. After 30 days on accelerated aging, ${\Delta}E^*$ value was increased (Panavia-F < Variolink-II < Resiment CE < Duolink < Unicem) (p < 0.05). but there were no significant difference among Panavia-F, Variolink-II, and Resiment CE groups. After 30 days of accelerated aging, ${\Delta}E^*$ value of all resin cements were greater than 3.0 and could be perceived by the human eye.

• Journal of the Korean Magnetics Society
• /
• v.24 no.1
• /
• pp.22-27
• /
• 2014

North indicating azimuth angle sensors have been used in airplanes, ships traditionally and nowadays employed in smart phones. For the azimuth and roll angle measurement of the sensor, 3-axis acceleration sensor was added to the 3-axis magnetic field sensor. In this work, we have constructed a measuring system for the measurement of the magnetic field and the angle uncertainty of the magnetic field sensors. Measuring system could be useful not only in non-magnetic laboratory but also in normal laboratory, we constructed small size of 3-axis Helmholtz coils for the compensation environment magnetic field (Earth magnetic field and magnetic field from building) and the generation of magnetic field for the test of magnetic field sensor. The constructed measuring system could compensate environment magnetic field below 10 nT level and generate 3-dimensional magnetic field with magnitude uncertainty of 0.2 % and angle error of $0.2^{\circ}$ within the volume of ${\pm}30mm$ diameter at center of Helmholtz coils. For the conformation of developed measuring system, We tested commercially available 3-axis magnetometer and heading sensor.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.8
• /
• pp.245-252
• /
• 2015

Recently, parallel processing methods with accelerator have been introduced into a high performance computing and a mobile computing. The photomosaic application can be parallelized by using inherent data parallelism and accelerator. In this paper, we propose a way to distribute the workload of the photomosaic application into a CPU and GPU heterogeneous computing environment. That is, the photomosaic application is parallelized using both CPU and GPU resource with the asynchronous mode of OpenCL, and then the optimal workload distribution rate is estimated by measuring the execution time with CPU-only and GPU-only distribution rates. The proposed approach is simple but very effective, and can be applied to parallelize other applications on a CPU and GPU heterogeneous computing environment. Based on the experimental results, we confirm that the performance is improved by 141% into a heterogeneous computing environment with the optimal workload distribution compared with using GPU-only method.