• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.1
• /
• pp.33-43
• /
• 2023

Pathological wear across the entire dentition causes problems such as collapsed occlusal plane, reduced vertical dimension, anterior premature contact, inadequate anterior guidance, and tooth migration, thereby induce symptoms such as temporomandibular joint disorder, reduced masticatory efficiency, and tooth hypersensitivity. For the treatment of patients with excessive wear, evaluation of vertical dimension should be preceded along with analysis of the cause. The patient in this case was a 45-year-old female with a history of orthognathic surgery. Through clinical examination, radiographic examination, and model analysis, overall tooth wear, interdental spacing in the anterior maxillary region, retruded condylar position, and insufficient interocclusal space for prosthetic restoration were confirmed. Full mouth rehabilitation with increased vertical dimension was planned, the patient's adaptation to the new vertical dimension was evaluated with a removable occlusal splint and temporary prosthesis, and cross-mounting was performed based on the temporary restoration to fabricate the definitive zirconia prosthesis, maintaining the adjusted vertical dimension. It showed satisfactory functional and esthetic results through stable restoration of the occlusal relationship.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.4
• /
• pp.639-645
• /
• 2007

Removable or fixed space maintainer could be needed if one or some anterior primary teeth were missing, where resin pontics well-matched to natural primary teeth should be demanded to get an esthetic satisfaction. Resin Natural $Teeth^{TM}$(Nissin dental, Japan) is available currently in Korea, which consists of two shades of colors; type A1 and A2. The purpose of this study is to elucidate the colors of the anterior primary resin teeth and to establish the data to compare those with the natural anterior primary teeth. CIE $L^*a^*b^*s$ were measured each three times labially from 17 sets of maxillary four anterior teeth for type A1 and A2 Resin Natural $Teeth^{TM}$ using ShadeEye $NCC^{TM}$(Shofu, Japan) which is one of spectrophotometers. The data were analysed statistically using Kruskall-Wallis Test and Mann-Whitney U Test. The results were as follows : 1. There were smaller teeth color differences in group A1 than in group A2 when it comes to distributions of ${\Delta}E$, $L^*$ and $b^*$. There were no statistically significant differences of $a^*$ between teeth in the same group(P>0.05). 2. ${\Delta}E$ in group A1 and A2 (maximum ${\Delta}E{\le}1.23$) were very small, which could not be discerned by eyesight. ${\Delta}E$ between mean CIE $L^*a^*b^*s$ of group A1 and A2 was 3.97, which could be discernible by eyesight. 3. Mean measurements of group A1 were $L^*=73.8$, $a^*=-1.8$, $b^*=-4.7$, and those of group A2 were $L^*=75.8$, $a^*=-2.7$, $b^*=-1.4$. It would be recommended that resin teeth compatible to the colors of the natural primary ones needed to be developed by investigating in vivo study.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.3
• /
• pp.487-493
• /
• 2008

Recently, in proportion to the remarkable development of dentistry and income increases it is growing more and more a concern about changed awareness in appearance. In this study, it had a grasp of the purpose for university hospital visiting, the motive of the commencement for orthodontic treatment and a method of the treatment as well as term. Based on these, the aim of this study is to keep more of the information between parent and doctors for mutual understanding and to grasp the characteristics for the needs of orthodontic treatment. In order to conduct researches, there has made a survey of 150 persons among orthodontic patients' parents who visit CBNU hospital, the pediatric dentistry. The study has found the results like these. 1. There was a question about the reason to visit CBNU hospital in the department of pediatric dentistry for orthodontic treatment. 52.1% of respondents, the survey found, were more likely to receive a good medical service. 25% of them were counselled from a relative or an acquaintance. 16.7% of them were recommended by another dental clinic. 2. There was a question about the expected orthodontic treatment period, when at first hospital visiting. 37.5% of the respondents answered that it was a 'more than 2 years', 12.5% of them said 'from 12 months to 18 months'. 3. There was a question about the reason to receive orthodontic treatment. 58.3% of the respondents, the survey found, answered the reason was parents' concern about the malocclusion of their children, 12.5% of them said a the orthodontic problem pointed out by entourages. 4. There was a question about the method of orthodontic treatment for patients who visit the department in pediatric dentistry. 41.7% of the respondents said that it was used as 'an intra-oral fixed appliance', 29.2% of them said 'an intra-oral removable appliance', 2.1% of them said 'an extra-oral appliance', 5. There was a question about the waiting time for treatment after a dental appointment. 60.4% of the respondents said 'from 5 minutes to 10 minutes', 4.1% of them said 'from 15 minutes to 30 minutes'. There was a question about the extent of an acceptable waiting time. It was answered to 'from 5 minutes to 10 minutes' by 60.4% of them, 2.1% of them said 'from 15 minutes to 30 minutes'.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.209-222
• /
• 2011

Missing anterior teeth can be replaced using any of a number of methods. Patients may choose to replace missing teeth with a prosthesis that is either removable, fixed, or retained with implants. For patients faced with financial, anatomical, and/or esthetic limitations, the edentulous region can be restored successfully and esthetically with a properly designed and fabricated rotational path RPD. The rotational path RPD is a partial removable dental prosthesis that incorporates a curved, arcuate, or variable path of placement allowing one or more of the rigid components of the framework to gain access to and engage an undercut area. The rigid retainer must gain access to the infrabulge portion of the tooth by rotating into place. Either a minor connector or proximal plate provides retention through its intimate contact with a proximal tooth surface. A specially designed dovetails or asymmetric rest seats provides support and embracing effects. Correctly designed and fabricated rotational path RPD can provide improved esthetics, cleanliness, and retention. But rotational path RPDs are technique sensitive since the rotational path RPD has little margin of laboratory error that rigid retainers cannot be adjusted like conventional clasps can, RPD framework must be remade once the retention is lost. The sufficient understanding of the concept for the rotational path RPD is required for clinically successful treatment. This clinical report describes in detail the theoretical, laboratory considerations and the treatment of a patient with an anterior maxillary edentulous area treated by an AP path rotational RPD that had a difficulty in long term maintenance and describes another clinical case in which more reasonable treatment procedures were approached after analyzing the former case.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.296-309
• /
• 1999

Autopolymerized resin facilitates a more rapid and easier means for the construction of removable orthodontic appliances than heat cured resin. But many reports reveal that more unreacted monomer is found in autopolymerized resin. It is very important to achieve maximum degree of polymerization because if polymerization is inadequate, high level of unreacted monomer has been shown to adversely affect mechanical and physical properties, and also the question of allergy or toxicity to methylmethacrylate must be considered. The purpose of this study was to compare the degree of polymerization according to curing method and curing time. Five groups were desinged ; Group 1 was polymerizied at room temperature($28^{\circ}C$) ; Group 2 in $28^{\circ}C$ water ; Group 3 in $28^{\circ}C$ water under 30psi pressure ; Group 4 in $43^{\circ}C$ water ; Group 5 in $43^{\circ}C$ water under 30psi pressure for 10 minutes, 1 hour 12 hours, 1 day and 3 days. The degree of polymerization was measured by means of Fourier Transform Infrared spectroscopy. The results were as follows: 1. The degree of polymerization increased constantly in accordance with curing time in all groups and after curing for 10 minutes, Group 1 showed significantly higher degree of polymerization after 12 hours and Group 2, Group 3, Group 4, Group 5 after 1 hour(p<0.05). 2. The degree of polymerization decreased in the order of Group 5, Group 4, Group 3, Group 2, Group 1 except when the curing time was 1 hour and 12 hours(p<0.05). 3. The degree of polymerization of Group 4, Group 5 cured at $43^{\circ}C$ showed significantly higher degree of polymerization than Group 2, Group 3 at $28^{\circ}C$ except when the curing time was 1 day(p<0.05). 4. Among Group 2, Group 3 and Group 4, Group 5, the pressure had no effect on polymerization except when the curing time was 12 hours(p<0.05). 5. Between Group 1 and Group 2, the method of storage had no effect on polymerization except when the curing time was 1 hour(p<0.05).

• Journal of dental hygiene science
• /
• v.14 no.4
• /
• pp.477-487
• /
• 2014

Of the many pathogenic Candida species, Candida albicans is the main fungal pathogen of humans. The oral environmental factors considered in the Candida albicans colony forming unit test contain both host and microbial factors associated with candidiasis. In particular, Candida biofilms can develop on surfaces of prosthesis. The purpose of this study was to investigate the distribution of oral Candida species between the type of prosthesis and the situation of oral environment in patient with prosthetic appliance. The patients were 30 elderly subjects with different types of prosthesis, 7 who wore denture, 12 who wore implant and 15 who wore removable orthodontic appliance. We used Candida albicans colony forming unit test using saliva to exam the distribution of Candida albicans related with 5 oral environmental factors, gender, smoking or nonsmoking, alcohol/nonalcohol consumption, the type of prosthetic appliance and its treatment duration as well as tooth brushing frequency per day. In conclusion, for the patient's gender, site in the oral cavity and the type of prosthetic appliance and its treatment duration was associated with an increase in the distribution of Candida albicans in saliva. The distribution of Candida albicans within the oral cavity performs to be modulated to varying extents by oral environmental factors and, further investigations are required to elucidate these complex interactions.