• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.1
• /
• pp.47-60
• /
• 2021

Hydrogen is a next-generation energy source, and according to the roadmap for activating the hydrogen economy, it is expected that industries to stably produce, store, and transport of hydrogen as well as the supply of hydrogen fuel cell vehicles will be made rapidly. Accordingly, safety measures for accidents of hydrogen vehicles in confined spaces such as tunnels are required. In this study, as part of a study to ensure the safety of hydrogen fuel cell vehicles in road tunnels, a basic investigation and research on the risk of fire and explosion due to gas leakage and hydrogen tank rupture among various hazards caused by hydrogen fuel cell vehicle accidents in tunnels was conducted. The following results were obtained. In the event of hydrogen fuel cell vehicle accidents, the gas release rate depends on the orifice diameter of TPRD, and when the gas is ignited, the maximum heat release rate reaches 3.22~51.36 MW (orifice diameter: 1~4 mm) depending on the orifice diameter but the duration times are short. Therefore, it was analyzed that there was little increase in risk due to fire. As the overpressure of the gas explosion was calculated by the equivalent TNT method, in the case of yield of VCE of 0.2 is applied, the safety threshold distance is analyzed to be about 35 m, and number of the equivalent fatalities are conservatively predicted to reach tens of people.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.1
• /
• pp.59-69
• /
• 2021

Recently, large-scale offshore and coastal structures have been constructed owing to the increasing interest in eco-friendly energy development. To achieve this, precise simulations of waves are necessary to ensure the safe operations of marine structures. Several experiments are required in the field to understand the offshore wave; however, in terms of scale, it is difficult to control variables, and the cost is significant. In this study, numerical waves under various wave conditions are produced using a piston-type wavemaker, and the produced wave profiles are verified by comparing with the results from a numerical wave tank (NWT) modeled using the smoothed particle hydrodynamics (SPH) method and theoretical equations. To minimize the effect by the reflected wave, a mass-weighted damping zone is set at the right end of the NWT, and therefore, stable and uniform waves are simulated. The waves are generated using the linear and Stokes wave theories, and it is observed that the numerical wave profiles calculated by the Stokes wave theory yield high accuracy. When the relative depth is smaller than two, the results show good agreement irrespective of the wave steepness. However, when the relative depth and wave steepness are larger than 2 and 0.04, respectively, the errors are negligible if the measurement position is close to the excitation plate. However, the error is 10% or larger if the measurement position is away from the excitation location. Applicable target wave ranges are confirmed through various case studies.

• Journal of Broadcast Engineering
• /
• v.27 no.3
• /
• pp.273-282
• /
• 2022

MPEG-VCM(Video Coding for Machine) aims to standardize video codec for machines. VCM provides data sets and anchors, which provide reference data for comparison, for several machine vision tasks including object detection, object segmentation, and object tracking. The evaluation template can be used to compare compression and machine vision task performance between anchor data and various proposed video codecs. However, performance comparison is carried out separately for each machine vision task, and information related to performance evaluation of multiple machine vision tasks on a single bitstream is not provided currently. In this paper, we propose a performance evaluation method of a video codec for AI-based multi-tasks. Based on bits per pixel (BPP), which is the measure of a single bitstream size, and mean average precision(mAP), which is the accuracy measure of each task, we define three criteria for multi-task performance evaluation such as arithmetic average, weighted average, and harmonic average, and to calculate the multi-tasks performance results based on the mAP values. In addition, as the dynamic range of mAP may very different from task to task, performance results for multi-tasks are calculated and evaluated based on the normalized mAP in order to prevent a problem that would be happened because of the dynamic range.

• Journal of Korea Water Resources Association
• /
• v.55 no.3
• /
• pp.245-255
• /
• 2022

Evaluating the qualitative the qualitative process of water resources by using various indicators, as one of the most prevalent methods for optimal managing of water bodies, is necessary for having one regular plan for protection of water quality. In this study, zoning maps were developed on a yearly basis by collecting and reviewing the process, validating, and performing statistical tests on qualitative parameters҆ data of the Iranian aquifers from 1995 to 2020 using Geographic Information System (GIS), and based on Inverse Distance Weighting (IDW), Radial Basic Function (RBF), and Global Polynomial Interpolation (GPI) methods and Kriging and Co-Kriging techniques in three types including simple, ordinary, and universal. Then, minimum uncertainty and zoning error in addition to proximity for ASE and RMSE amount, was selected as the optimum model. Afterwards, the selected model was zoned by using Scholar and Wilcox. General evaluation of groundwater situation of Iran, revealed that 59.70 and 39.86% of the resources are classified into the class of unsuitable for agricultural and drinking purposes, respectively indicating the crisis of groundwater quality in Iran. Finally, for validating the extracted results, spatial changes in water quality were evaluated using the Groundwater Quality Index (GWQI), indicating high sensitivity of aquifers to small quantitative changes in water level in addition to severe shortage of groundwater reserves in Iran.

• Journal of Environmental Impact Assessment
• /
• v.31 no.3
• /
• pp.129-140
• /
• 2022

Environmental impact assessment on development projects is a process in which various stakeholders derive consultations by reflecting project characteristics and regional environmental status, and implementation of consultations is a prerequisite for securing sustainability of the local environment. The business plan can be changed to respond to changes in social and environmental conditions. And the business plan for which the environmental impact assessment consultation has been completed, it can be changed as a systematically prepared procedure (called Consultations on Amendment). As a result of investigating and analyzing the current status and major changes in the development project, Consultations on Amendment in industrial complexes were the most common, and the environmental impact is increasing accordingly. As the results of the analysis of operational status and the case studies, the main causes of Consultations on Amendment in industrial complex can be summarized into three categories: (1) formal demand forecasting for tenant industries, (2) excessive omission and simplification of administrative procedures under the Special Act, and (3) the use of an expedient change consultation system to facilitate environmental impact assessment consultation and shorten the period. This study proposes the following three measures to prevent the deterioration of the environmental impact assessment function due to frequent consultations on industrial complex changes; (1) Ensuring residents' participation procedures for Consultations on Amendment that changes important matters, (2) Reasonable revision of the "Simplification of Industrial Complex Procedures Act" to enhance the feasibility of industrial complex development plans and locations, (3) Development of evaluation criteria and methods for verification of real demand for objective demand management for industrial complexes, and (4) Preparation of a review guideline for Consultations on Amendment.

• 한국노년학
• /
• v.40 no.3
• /
• pp.459-475
• /
• 2020

This study examined the moderating effect self-rated health has on the association between grandparenting and depressive symptoms. The fourth wave (in 2012) of the Korean Longitudinal Study of Ageing (KLoSA) was used for the analyses (N=650). The Coarsened Exact Matching (CEM) method was applied in order to ensure randomness in the selection of grandparents who participated in grandparenting and those who did not. The dependent variable was depressive symptoms, the independent variable was grandparenting, and the moderating variable was self-rated health. Control variables were education level, age, household income, gender, marital status and life satisfaction. After matching data by CEM, weighted multiple regression was applied with STATA 13.0. Also, simple slope analysis and region of significance were performed to interpret the interaction terms. The results showed that self-rated health had a significant moderating effect. Specifically, for grandparents with high self-rated health, grandparenting was associated with a lower level of depressive symptoms. On the contrary, for grandparents with low self-rated health, there was no difference depending on whether they participated in raising grandchildren. Based on these results, we discussed the need for consideration of self-rated health for grandparents who participated in grandparenting.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.13 no.4
• /
• pp.29-39
• /
• 2017

Various electronic warfare situations drive the need to develop an integrated electronic warfare simulator that can perform electronic warfare modeling and simulation on radar threats. In this paper, we analyze the components of a simulation system to reversely model the radar threats that emit electromagnetic signals based on the parameters of the electronic information, and propose a method to gradually maintain the reverse extrapolation model of RF threats. In the experiment, we will evaluate the effectiveness of the incremental model update and also assess the integration method of reverse extrapolation models. The individual model of RF threats are constructed by using decision tree, naive Bayesian classifier, artificial neural network, and clustering algorithms through Euclidean distance and cosine similarity measurement, respectively. Experimental results show that the accuracy of reverse extrapolation models improves, while the size of the threat sample increases. In addition, we use voting, weighted voting, and the Dempster-Shafer algorithm to integrate the results of the five different models of RF threats. As a result, the final decision of reverse extrapolation through the Dempster-Shafer algorithm shows the best performance in its accuracy.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1D
• /
• pp.1-10
• /
• 2008

Recently, the Seoul Metropolitan Government (SMG) has initiated several urban redevelopment projects to revitalize the downtown well equipped for transit oriented development (TOD). Since, TOD should incur higher density development in our context, it has negative impacts on travel patterns, congestion, and urban environmental quality. The purpose of this study is to develop new transportation service index which can facilitate higher density TOD. This study includes relevant foreign case studies, the development of multimodal transportation index, and the impact analysis of TOD when it is applied in the downtown Seoul. In chapter III, it developed a so-called ITLOS, new multimodal transportation service index which shows the possibility of accommodating further development by integrating roadway service index with public transportation service index. The study sets ten policy scenarios by varying densities, and run the Seoul Congestion Management Model (SECOMM) to estimate the sustainable transportation impacts of TOD in the downtown. Travel speed index that only represents the availability of road capacity for development reveal that higher density development in the downtown can deteriorate traffic congestion while improving region-wide transportation level of service in Seoul. Also, it is proved that higher density development is more feasible when using ITLOS as the index because it considers not only available road capacity but subway capacity in the analysis area.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.6
• /
• pp.491-499
• /
• 2023

Scattering by Sea surface roughness occurs due to sea level roughness, communication performance deteriorates by causing frequency spread in communication signals and time variation in communication channels. In order to compare the difference in time variation of underwater acoustic communication channel according to the surface roughness, an experiment was performed in a tank owned by Hanyang University Ocean Acoustics Lab. Artificial surface roughness was created in the tank and communication signals with three bandwidths were used (8 kHz, 16 kHz, 32 kHz). The measured surface roughness was converted into a Rayleigh parameter and used as a roughness parameter, and statistical analysis was performed on the time-varying channel characteristics of the surface path using Doppler spread and correlation time. For the Doppler spread of the surface path, the Weighted Root Mean Square Doppler spread (w_fσ_ν) that corrected the effect of the carrier frequency and bandwidth of the communication signal was used. Using the correlation time of the surface path and the energy ratio of the direct path and the surface path, the correlation of total channels was simulated and compared with the measured correlation time of total channels. In this study, we propose a method for efficient communication signal design in an arbitrary marine environment by using the time-varying characteristics of the sea surface path according to the sea surface roughness.

• Health Policy and Management
• /
• v.34 no.1
• /
• pp.68-77
• /
• 2024

Background: Depressive disorders can be categorized into daily depression and clinical depression. The experience of depressive disorder can increase health care utilization due to decreased treatment compliance and somatization. On the other hand, the clinical depression group may also experience social prejudice associated with the illness, which can limit their access to health care utilization. In terms of the significance of health care utilization as a factor in individual and social issues, this study aims to compare the health care utilization of the clinical depression group with that of the non-depressed group and the daily depression group. Methods: The analysis utilized the inverse probability of treatment weighting based on the generalized propensity score. Results: As a result of the analysis, clinical depression and daily depression were higher among women, low-income groups, individuals with low education levels, and so forth. The clinical depression group was also higher among individuals who were not economically active, did not have private health insurance, or had multiple chronic diseases. The number of outpatient department visits in the depression group was significantly higher than in the non-depressed group. In addition, the number of outpatient department visits for the clinical depression group was significantly higher than that for the daily depression group. Outpatient medical expenses were higher in the depression group than in the non-depressed group, and there was no significant difference between the clinical depression group and the daily depression group. Conclusion: Health care utilization was higher in the depression group than the non-depressed group, it was also higher in the clinical depression group than the daily depression group.