• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.216-219
• /
• 2000

Pyrolysis products of woody biomass were consistedofvarious linear hydrocarbon, aromatics or condensed cyclic compounds. In order to obtain biomass pyrolysis products, more equipments and time were needed. But solvolysis of woody biomass with acetone easily obtained decomposition products and enhanced conversion rate(18.72%, max.) from woody biomass than pyrolysis of woody biomass. Beacause solvolysis with acetone improved conversion rate (26.64%, max.) of lignin. the whole conversion rate was improved. But above $300^{\circ}C$, lignin showed lower conversion rate, so the whole conversion rate decreased. Solvolysis products of woody biomass with acetone were same as pyrolysis products. Above $400^{\circ}C$, methoxy phenols were completely disappeared.

• Journal of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.3-8
• /
• 1986

The investigation of the effect of solvent structure on the first-order solvolysis of cis-$[Co(en)_2ClNO_2]^+$ion has been extended to water + co-solvent mixtures where the co-solvents are glycerol, ethylene glycol, isopropyl alcohol and t-butyl alcohol. Rates of solvolysis have been evaluated by spectrophotometric method at temperature 25∼30$^{\circ}$C. The polarity of solvent has influence on the variation of rate constant. The non-linear plot of the rate constant in log scale versus $\frac{D-1}{2D+1}$ implies that change in solvent structure with composition plays an important role in determining the variation of rate constant. The linearity of the plot of the rate constant in log scale versus the Grundwald-Winstein Y factor confirms that the solvolysis is an Id-type process with considerable extension of the metal chloride bond in the transition state. In the Kivinen equation the slope of the plot of log k versus $log(H_2O)$ suggests that the solvolysis is also an Id-type process. The application of free energy cycle shows that the effect of solvent structure is greater in the transition state than in the initial state.

• Food Science and Preservation
• /
• v.9 no.3
• /
• pp.332-337
• /
• 2002

This study was undertaken in order to compare reflux extraction(RE) and microwave-assisted extraction(MAE) in extraction efficiency and establish optimum microwave extraction conditions in obtaining Ligularia fischeri extracts. A considerable reduction in extraction time was accomplished by MAE. When 70% methanol 50% methanol 70% ethanol, or 50% ethanol was used, MAE extract contained equal levels of soluble solid and total polyphenol as obtained by RE. The optimum microwave-assisted extraction conditions for Ligularia fischeri were achieved by 120∼150 watts of microwave energy and 4∼8 minutes of extraction time. No significant changes were found in antioxidant activity with DPPH scavenging method over the variation of microwave energy or extraction time. The use of diluted methanol or ethanol improved soluble solid content(30%), total polyphenol content(2.7%) and antioxidant activity(68%).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.2
• /
• pp.213-221
• /
• 2012

In this paper, a dynamic power management system is proposed to reduce energy consumption for multiple clients in cloud computing environments. The proposed system monitors both keyboard and mouse input from the user, available memory, and CPU usage in the virtual machine. If the system detects no keyboard and mouse input for a certain amount of time and both available memory and CPU usage reach predefined threshold value, the manager in the virtual machine orders the client to shutdown the client machine, which results in significant power save. The developed system is applied to the real university computer lab and the performance of the system is evaluated.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.2
• /
• pp.217-224
• /
• 2011

Existing wire based physical security system solutions show limitations in time and space. In order to solve these deficiencies, a remote physical security system has been implemented using smart phone based on mobile cloud computing technique. The security functions of mobile cloud computing technique include mobile device user authentication, confidentiality of communication, integrity of information, availability of system, and target system access control, authority management and secure hand off etc. Proposed system has been constructed as remote building management system using smart phone, and also has been efficient to reduce energy cost (5~30%), result of system average access and response time 7.082 second. This systems are evaluated to have high efficiency compared to performance.

• Food Science and Preservation
• /
• v.11 no.1
• /
• pp.88-93
• /
• 2004

This study was conducted in order to compare reflux extraction(RE) and microwave-assisted extraction(MAE) in extraction efficiency and establish optimum microwave extraction conditions in obtaining Aster scaber Thunb extracts. Extraction time was reduced considerably in MAE. When 70％ methanol, 50％ methanol, 70％ ethanol, or 50％ ethanol was used, no difference was found in the amount of soluble solid and total phenol between MAE and RE. The optimum microwave-assisted extraction conditions for Aster scaber Thunb were achieved by 120-150 watts of microwave energy and 4∼8 minutes of extraction time. No significant changes were found in antioxidant activity using DPPH scavenging method over the variation of microwave power or extraction time. The use of diluted methanol or ethanol improved soluble solid content(30.8％), total polyphenol content(2.9％) and antioxidant activity(69％ ).

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.224-234
• /
• 2012

This paper describes an energy harvesting circuit using solar and vibration energy with MPPT(Maximum Power Point Tracking) control for micro sensor nodes. The designed circuit employs MPPT control to harvest maximum power available from a PZT vibration element and an integrated solar cell. The harvested energies are simultaneously combined and stored in a storage capacitor, and then managed and transferred into sensor node by PMU(Power Management Unit). MPPT controls are implemented using the linear relationship between the open-circuit voltage of an energy transducer and its MPP(Maximum Power Point) voltage. The proposed circuit is designed in a CMOS 0.18um technology and its functionality has been verified through extensive simulations. The designed energy harvesting circuit and integrated solar cell occupy $2.85mm^2$ and $8mm^2$ respectively.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.12 no.3
• /
• pp.9-16
• /
• 2016

This study had the purpose on feasibility judgment through performance forecast of wind power generation system using the cross flow vertical type wind power turbine for the situation of domestic small size wind power technology development. Wind power generation system uses the principle of venturi tube that gathers the wind through the first guide vane, and second guide vein changes the angle of the wind simultaneously by playing the role of venturi tube. After this, wind got out from the second guide vane spins the wind power turbine and has the meaning of judging on the aspect of numerical interpretation the feasibility for the small size wind power generation through wind power generation system that comes out from the back.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.392-395
• /
• 2011

In this paper, a vibration energy harvesting circuit using the piezoelectric element has been designed. MPPT (maximum power point tracking control) control function has been implemented to deliver the maximum power to the load by using the electric power-voltage characteristic of the piezoelectric element. The designed MPPT circuit traces the maximum power point by sampling periodically the open circuit voltage of the full wave rectifier circuit and delivers the maximum available power to the load. The vibration energy harvesting circuit is designed with $0.18{\mu}m$ CMOS process. The maximum power efficiency is 91%, and the chip area except pads is $1,100{\mu}m{\times}730{\mu}m$.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.11
• /
• pp.55-62
• /
• 2018

To receive financial support for the Green Remodeling, applicants must submit an energy simulation report. However, many of the applicants are not green remodeling specialist and energy simulation services are too expensive for them. For this reason, this study was to develop an energy simulation program to enhance green remodeling for the non-specialist such as housewives. Firstly, to enhance understanding and accessibility improvement energy simulation, simulation process was designed four steps and reducing input data. Specifically, input data was reduced by categorizing the following for the area, plan type, hot water load, electricity load, statistical inference. And then, to accurately verify the calculation result, the heat and hot water demand were derived and compared with ECO2 and Energy # program. Lastly, the calculation shows that there is a difference of 4% for the heat load and 15% to 33% for the hot water load respectively.