• Aerospace Engineering and Technology
• /
• v.9 no.1
• /
• pp.35-41
• /
• 2010

The temperature of the flight objects in high speed increases due to the aerodynamic heating. MINIVER and CFD approach are used to predict the aerodynamic heating conditions of KSLV-I. MINIVER is based on the empirical method. And the CFD approach predicts the aerodynamic heating conditions after the analysis of the surface temperature and the surface heat flux directly. In this study, the aerodynamic heating conditions using CFD approach are considered. The PLF temperature for these aerodynamic heating conditions is compared with the flight test data of KSLV-I.

• Korean Journal of Food Science and Technology
• /
• v.26 no.1
• /
• pp.37-43
• /
• 1994

Optimization study was conducted for preparation of uncompressed soy protein isolate(SPI) tofu in the aspects of water addition ratio, second heating temperature and amounts of oil and dextrin added. The SPI tofu was prepared without compression step with SPI-oil-dextrin mixture and $CaSO_4-GDL$ mixed coagulants. The data were statistically analyzed by multiple regresstion and response surface methodology(RSM). Addition of dextrin increased the hardness of tofu, particularly for the second heating at $85^{\circ}C$ and 8 times of water to SPI. RSM figure showed that the effect of dextrin on hardness became to be less as the heating temperature increased. The hardness increase effect was no significant except addition of 25% oil and 8 times of water and second heating at $85^{\circ}C$. The addition of 25% oil and $10{\sim}15%$ dextrin and second heating at $90^{\circ}C$ for $45{\sim}60$ minutes resulted hardness and cohesive tofu. The optimal method proposed for uncompressed SPI tofu on the basis of textural and sensory properties was first heating of homogenized SPI-oil-dextrin(100:25:15) with addition of 8 times of water(on the basis of SPI) at $100^{\circ}C$ for 6 minutes, cooling to $40^{\circ}C$, additon of mixed coagulants of $CaSO_{4}-GDL$(0.07 g, 0.0075 g/SPI) and second heating at $90^{\circ}C$ for 45 minutes.

• Food Industry And Nutrition
• /
• v.6 no.2
• /
• pp.3-12
• /
• 2001

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.6
• /
• pp.939-944
• /
• 1994

The change of major organic acid contents were examined in mackerel, pacific yellow croaker and brown sole on heating conditions. The organic acid contents of mackerel were the higher that the others. The content of lactic acid was the highest in all samples commonly and that of succinic acid was second level and these organic acids were over 95% of total organic acid. The content of ${\alpha}-ketoglutaric$ acid was higher acid content was greater with higher heating temperature. Decreasing of organic acid content was higher at steamed and first heating than warmed and rewarmed.

• Food Science and Preservation
• /
• v.8 no.3
• /
• pp.331-337
• /
• 2001

The oxidative stability of tallow heated was studied by different frying condition (temperature 130, 150, and 180$^{\circ}C$;heating time, each 10hours per day, total 240hrs). Changes of physicochemical parameters such as acid value, peroxide value, iodine value, dielectric constant, content of polar components and polymer, refractive index, smoke point, viscosity and color changes in tallow heated were also measured. Acid value, dielectric constant, refractive index, viscosity, and content of polar component and polymer increased as the tallow was heated longer, whereas iodine value and smoke point decreased and peroxide value was increased and decreased repeatedly. These parameters changed to a greater extent as the heating temperature went up. The color became darkened with the increase of red and yellow values during heating. The decree of coloration was proportional to heating temperature.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.284-291
• /
• 1997

Microwave vacuum heating method (2450 MHz) was used for a low intensity of heat treatments. High vacuum under the microwave heating could bring low temperature condition. Inactivation of ${\alpha}-amylase,\;{\beta}-amylase$, glucoamylase and peroxidase by microwave vacuum heating were investigated at 60-$80^{\circ}C$. It was compared with conventional heating. The heating condition of microwave vacuum heating was confirmed by the destruction of ascorbic acid. When thermal inactivations of the enzymes by microwave vacuum heating were determined, it was less effective than that of conventional method at the initial stage of heating. It was due to a lag time of microwave heating. However, the heating time for complete inactivation of the enzymes by microwave vacuum heating could be reduced comparing with that of conventional heating. Optimum conditions for inactivation of the enzymes could be obtained by microwave vacuum heating.

• Journal of the Korea Concrete Institute
• /
• v.13 no.3
• /
• pp.195-205
• /
• 2001

This Paper describes a numerical method to evaluate the flexural strength of reinforced concrete members exposed to fire. An analytical method is developed for the moment-curvature relationship for the cross section which is subjected to high temperature. The method performs heat-transfer analysis for the cross sections and subsequently performs numerical analysis using the stress-strain relationships of concrete and reinforcing steel in various heat conditions. The results of the numerical studies are ; 1) the residual flexural strength exposing at high temperature is affected by the heating time, the depth of concrete cover and reinforcement ratio, 2) the residual flexural strength after exposed at high temperature is recovered of its original strength at minimum ratio of reinforcement, while members having half of maximum ratio and maximum ratio of reinforcement do not recover its original strength, 3) furthermore, the concrete may reach its maximum capacity before reinforcement yields in reinforced concrete members having maximum ratio of reinforcement.

• Korean Journal of Food Science and Technology
• /
• v.23 no.3
• /
• pp.366-369
• /
• 1991

In order to elucidate texturization mechanism of extrudated protein, egg white lysozyme was heated under high pressure conditions, and its solubility and changes of molecular weight were investigated. Under high pressure conditions of $100,\;300\;and\;600\;kg/cm^2$, solubility decreased gradually with increasing temperature in the samples heated at $70,\;120\;and\;150^{\circ}C$ and decreased notably with increasing pressure at $200^{\circ}C$. Polymerization was found in the samples heated at $150\;and\;200^{\circ}C$ while a band which located below monomer(low-molecular) could be recognized. Molecular weight of the low-molecular was estimated to be about $6,000{\sim}9,000$ and no smaller peptide was recognized. The polymerization may have occured by disulfide crosslinking in the samples heated at $120^{\circ}C$ but other crosslinking may have played a role in those at $150\;and\;200^{\circ}C$.

• Food Science and Preservation
• /
• v.14 no.2
• /
• pp.142-147
• /
• 2007

We optimized braising time to improve the storage quality of braised kidney beans. The beans were prepared with different heating times between 25 and 50 min. and then stored at $10^{\circ}C$ for 20 day. Physical, chemical, microbiological, and organoleptic quality indices were monitored throughout storage. Longer braising times yielded products with lower concentrated brine coverage. Bis resulted in higher soluble contents and slightly lower water activities. Excessive heating time exposed the kidney beans to air and caused rapid microbial growth on the surfaces of the beans, which negatively affected product quality. The longest heating time of 50 min. also resulted in a large increase in product hardness. A braising time of 30 min. was best for preservation, as good sensory quality was mainatained.

• Korean Journal of Food Science and Technology
• /
• v.29 no.4
• /
• pp.730-736
• /
• 1997

Pasteurization of low salt dongchimi juice was studied for the effect of heating temperature and time on total viable counts and some physicochemical and sensory properties. The juice was prepared by fermentation of the radish at $20^{\circ}C$ in 0.5% NaCl solution. Heating the juice (pH 3.8) at $60{\sim}100^{\circ}C\;for\;5{\sim}30$ min caused little changes in pH and total acidity while the lightness (L value) was decreased and the turbidity, a and b values of color were increased as the heating temperature and time increased. The total viable counts of microorganisms was significantly decreased to 18 at $60^{\circ}C$ and 6 at $70^{\circ}C$ after 30 min heating and was not detected after heating at 90 and $100^{\circ}C$ for 10 min. The sensory test showed that heating up to $70^{\circ}C$ for 20 min caused a little cooked off-flavor. After storage of the pasteurized juices at $30^{\circ}C$ for 10 days, the pH, total acidity and color were changed little while the unheated juice changed significantly. The total viable counts of microorganisms was also remained initial level after pasteurization. Therefore pasteurization at $60^{\circ}C$ for 30 min or $70^{\circ}C$ for 20 min was recommendable in the aspects of storage stability and quality characteristics.