• Resources Recycling
• /
• v.31 no.6
• /
• pp.44-51
• /
• 2022

In the steelmaking process using an electric arc furnace (EAF), light-burnt dolomite, which is a flux containing MgO, is used to protect refractory materials and improve desulfurization ability. Furthermore, a recarburizing agent is added to reduce energy consumption via slag foaming and to induce the deoxidation effect. Herein, a waste MgO-C based refractory material was used to achieve the aforementioned effects economically. The waste MgO-C refractory materials contain a significant amount of MgO and graphite components; however, most of these materials are currently discarded instead of being recycled. The mass recycling of waste MgO-C refractory materials would be achievable if their applicability as a flux for steelmaking is proven. Therefore, experiments were performed using a target composition range similar to the commercial EAF slag composition. A pre-melted base slag was prepared by mixing SiO₂, Al₂O₃, and FeO in an alumina crucible and heating at 1450℃ for 1 h or more. Subsequently, a mixed flux #2 (a mixture of light-burnt dolomite, waste MgO-C based refractory material, and limestone) was added to the prepared pre-melted base slag and a melting reaction test was performed. Injecting the pre-melted base slag with the flux facilitates the formation of the target EAF slag. These results were compared with that of mixed flux #1 (a mixture of light-burnt dolomite and limestone), which is a conventional steelmaking flux, and the possibility of replacement was evaluated. To obtain a reliable evaluation, characterization techniques like X-ray diffraction (XRD) analysis and X-ray fluorescence (XRF) spectrometry were used, and slag foam height, slag basicity, and Fe recovery were calculated.

• Journal of agriculture & life science
• /
• v.50 no.4
• /
• pp.91-98
• /
• 2016

This aim of the present study was to evaluate the effects of phosphate on the quality properties of the surimi-like materials. Surimi-like materials as a control was prepared with beef heart by three times of washing treatment. Three types of surimi-like materials were manufactured by different conditions(T1: 2% salt, T2: 1.95% salt+0.05% phosphate, T3: 1.90% salt+0.10% phosphate). The moisture content was significantly lower in T1 than the control, and T3 sample had the highest crude protein content(P<0.05). The cooking loss was significantly lower in T2 than the control, and T2 sample had the highest water-holding capacity(P<0.05). The lightness and whiteness values were significantly lower in the treatment samples compared to the control sample; whereas redness values was higher than the control(P<0.05). Beef heart surimi-like materials added with salt and phosphate had higher in texture properties in the control, and T3 sample had the highest hardness, cohesiveness, gumminess and chewiness values(P<0.05). Therefore, the addition of phosphate could increase the protein content and gel properties as well as water-holding capacity of surimi-like materials from beef heart.

• Korean Journal of Poultry Science
• /
• v.50 no.3
• /
• pp.143-159
• /
• 2023

The study aimed to evaluate the antioxidative effects of rosemary (Rosmarinus officinalis L.) and clove (Syzgyium aromaticum L.) essential oils on fried Korean native thigh meat, including their impact on processed characteristics and flavor compounds. Clove essential oil showed higher DPPH scavenging activity, FRAP and total phenol content compared to rosemary essential oil (P<0.05). The treatments with the addition of 0.005% and 0.01% rosemary (0.005RB and 0.01RB) and clove (0.005CB and 0.01CB) essential oils to the batter weight compared to control that did not include essential oils in batter. The addition of rosemary and clove essential oils to fried Korean native chicken thigh meat did not significant affect proximate composition, pH, TBARS, sensory characteristics. Except for 0.005CB, treatments adding essential oils decreased cooking loss (P<0.05) and 0.005CB showed significantly higher pick-up value than control. Addition of clove essential oil in fried Korean native chicken thigh meat resulted in higher levels of arachidonic acid compared to control (P<0.05). Volatile organic compounds (VOCs) analysis showed that addition of rosemary essential oil might mask its own VOCs, while clove essential oil addition reduced some pyrazine compounds. Although addition of rosemary and clove essential oil did not have significant sensory characteristics on fried Korean native chicken thigh meat, instrumental analysis revealed changes in the compounds that influenced flavor. Further studies are required to evaluate the stability of flavor and sensory characteristics of fried Korean native chicken thigh meat with added essential oils during storage.

• Journal of Food Hygiene and Safety
• /
• v.39 no.2
• /
• pp.109-117
• /
• 2024

This study investigated the microbial contamination of agricultural, livestock, and marine ingredients in 55 meal kits distributed across Gyeonggi-do, South Korea. Of the 55 meal kits, 48 contained agricultural ingredients, 43 contained livestock ingredients, and 16 contained marine ingredients. The detection rate of the total aerobic bacteria in the agricultural, livestock, and marine products was 100%. The average numbers of the total aerobic bacteria were 6.57 log colony-forming units (CFU)/g in the agricultural products, 4.60 log CFU/g in the livestock products, and 5.47 log CFU/g in the marine products. The coliform detection rates in the agricultural, livestock, and marine products were 81.25%, 69.77%, and 43.75%, respectively. The average numbers of coliforms were 2.83 log CFU/g in the agricultural products, 1.34 log CFU/g in the livestock products, and 1.12 log CFU/g in the marine products. Escherichia coli was detected in 13 livestock products (30.23%), with levels ranging from 0.70 to 2.36 log CFU/g. Contrastingly, E. coli was detected in only one marine product (6.25%) and was not detected in any agricultural products. The detection rates of fungi in agricultural, livestock, and marine products were 97.92%, 93.02%, and 93.75%, respectively. The average numbers of fungi were 3.82 log CFU/g for the agricultural products, 2.92 log CFU/g for the livestock products, and 2.82 log CFU/g for the marine products. The isolation rates of foodborne pathogens from the agricultural, livestock, and marine products were 35.42%, 37.21%, and 31.25%, respectively. Forty-five foodborne pathogens of seven species, including Bacillus cereus and Salmonella spp., were isolated from the raw materials of the agricultural, livestock, and marine products in 55 meal kits. To prevent foodborne diseases caused by meal kits, it is necessary to focus on washing, heating, and preventing cross-contamination during cooking.

• Korean Journal of Poultry Science
• /
• v.51 no.1
• /
• pp.11-19
• /
• 2024

This study was conducted to evaluate the potential of using laying hens as meat type chickens. Male broiler (Ross 308, R3), laying hens (Hy-Line Brown, HL), and Korean native chickens (Hanhyup-3, H3) were used, and 100 heads of each were prepared. Carcass characteristics, meat quality, and sensory quality characteristics were compared as analysis items. The rearing environment and feed for all treatments were identical to the broiler rearing manual, and the lighting system was maintained at 23L:1D. Feed and water were provided ad libitum. The test ended when the average weight of each treatment group reached 1.5 kg, and individuals of similar weight were randomly selected and compared. As a result of this study, the live weight of the selected individuals was approximately 1.5 kg, which was similar for all treatments (P>0.05). However, carcass weight and ratio and breast meat production were highest in R3, while HL had higher ratios of legs, wings, and neck (P<0.05). The H3 group showed high pH and WHC levels and low cooking loss, and R3 improved chicken meat color (P<0.05). In particular, the fat content in meat was lowest in HL (P<0.01). Nucleic acid substances ATP, Hx, ADP, AMP, and INO were abundant in R3, and IMP content was highest in HL (P<0.05). In sensory evaluation, all treatments showed similar characteristics and overall preferences (P>0.05). Based on the findings, it appears that HL, a male laying hen, produces meat with unique characteristics such as low fat content and high IMP content.

• Journal of Food Hygiene and Safety
• /
• v.39 no.1
• /
• pp.26-34
• /
• 2024

In this study, the food service management levels of cafeterias in childcare facilities were investigated based on the number of meal recipients and the working status of the kitchen staff. The study included 199 childcare facilities nationwide that received food supplies from the food ingredients distribution company, Pulmuone Foodmerce, from 2021 to 2022. The assessment was conducted using 61 inspection items. The analysis revealed that, as the number of meal recipients and kitchen staff members decreased, the documentation of inspection results was less likely to be conducted (P<0.05). Facilities with fewer meal recipients showed less adequate health status checks for kitchen staff, and those with fewer kitchen staff showed insufficient compliance with hygienic clothing (P<0.05). Additionally, facilities with fewer meal recipients showed a higher frequency of lapses in checking the expiration dates of stored ingredients (P<0.05), requiring increased management attention. They also exhibited the absence of internal temperature measurement records during heating processes (P<0.05). Furthermore, facilities with fewer meal recipients demonstrated inadequate maintenance of kitchen facilities (P<0.05). Significantly higher adenosine triphosphate (ATP) levels were detected on the hands and cutting boards of the kitchen staff in facilities with fewer meal recipients and fewer kitchen staff (P>0.05). Overall, facilities with fewer meal recipients exhibited insufficient infrastructure management for kitchen operations and inadequate hygiene management. These results are expected to provide foundational data for the selection of national support programs for childcare facilities in the future.

• Journal of Food Hygiene and Safety
• /
• v.39 no.1
• /
• pp.16-25
• /
• 2024

This study investigated the prevalence of Campylobacter spp. In poultry meat and its association with foodborne illnesses in Gwangju, South Korea. It was found that out of the 307 samples of poultry meat examined, 111 (36.2%) were infected with Campylobacter spp. Among the isolated strains, 102 were identified as Campylobacter jejuni and 14 as Campylobacter coli. The detection rate of Campylobacter spp. was higher in duck meat (63.1%) than in chicken meat (26.0%). In 5 samples (1 chicken, 4 duck), both Campylobacter jejuni and Campylobacter coli were found together. The antimicrobial resistance test showed that 99 strains were resistant to more than one antimicrobial. The most common antimicrobial resistance was seen against ciprofloxacin (84.5%), followed by nalidixic acid (82.8%), tetracycline (44.0%), and gentamicin (2.6%). The isolated Campylobacter spp. were serotyped and the results showed the presence of HS2 (20 strains), HS15 (11 strains), HS19 (9 strains), and HS8 (8 strains). Considering the findings, it is recommended to maintain hygienic practices during the cooking process and to take necessary precautions to prevent the spread of pathogenic bacteria.

• Food Science and Preservation
• /
• v.31 no.3
• /
• pp.423-432
• /
• 2024

In this study, a vacuum tumbler with 4 impellers (DVT) was designed and applied for thawing frozen pork (vacuum -60 kPa, jacket 35℃, 1 rpm). Quality characteristics of the thawed pork were compared with those of industrially thawed meat by natural air at room temperature (NAT) and imported vacuum tumbler (IVT). The thawing time for frozen pork (303.36 kg) using DVT (165 min) was much shorter than that of NAT (4,200 min). DVT-thawed pork had lower drip loss (0.85%) than NAT (2.08%). DVT-thawed pork showed a pH of 5.92, a total bacterial count of 1.96±0.02 log CFU/g and no coliforms. Deteriorations in fat (TBARS 0.31±0.01 MDA mg/kg) and protein (VBN 5.67±1.98 mg%) in DVT-thawed pork were significantly lower than those of NAT (p<0.05). DVT-thawed pork had a high water-holding capacity (WHC, 97.5%). The hardness (34.59±0.46 N) and chewiness (188.21±0.17) of cooked DVT-thawed pork were about 5-6 times lower than those of NTA. Microstructure (SEM) showed myofibrillar damage in NAT-thawed pork, whereas dense myofibrillar structure was observed in DVT-thawed pork. DVT was better or similar to IVT in all evaluation parameters. The designed DVT is expected to be used as an efficient thawing method in terms of processing time and yield and to produce thawed meat with high WHC, soft texture, and low spoilage by minimizing tissue damage.

• Applied Biological Chemistry
• /
• v.15 no.1
• /
• pp.65-75
• /
• 1972

The rice qualities including cooking and eating qualities were studied using recommended Korean rice varieties (20 of japonica and 3 of indies type; IR 667) which were grown at Suwon, Korea in 1971. As the result, followings were obtained. 1. Amylose contents of white rice were varied with the varieties 21.1 to 25.5% and the average was 23.0%. Three indica type varieties (IR 667) showed higher amylose contents than the other japonica type varieties except Mankyung. Among japonica type varieties, Palkum, Mankyung composed the group of the highest amyloes content and Kimmaje was the lowest. 2. Blue values were distributed in the range of 0.38 to 0.48 and the average was 0.42 IR 667 varieties showed the highest blue value among them. Among japonica type varieties, Jaegun showd the highest blue value and Sooseung, Shirogane showed successively lower values, Shin #2, Nongbaik, Palkweng, Suwon #82, Mankyung, Nonglim #25 and Nongkwang relatively lower blue values. 3. Alkali numbers were in the range of 6.0 to 7.4 and the average was 6.8. Much difference was not shown in alkali number between IR 667 group and the japonica varieties group. 4. Gelatinization temperature were ranged from 59.5 to 64.0 IR 667 varieties showed relatively higher gelatinization temperature than japonica type varieties. 5. Water uptake ratios were measured in the range of 2.67 to 2.92 and the average was 2.79. IR 667 varieties were belonged to the group of highest water uptake ratio. Among japonica type varieties Kimmaje, Suwon #82, Nonglim #29, Deungpan #5, Jaegun, Jinhung, were belonged to the group of relatively high water uptake ratio and Palkweng, Palkeum and Paldal to the relatively low water uptake ratio. 6. Expaned volums were ranged from 29.8 to 33.7 and the average was 31.8. IR 667 varieties showed higher expanded volumes than japonica type varieties. 7. Intensities of starch-iodine blue value of residual liquid indicated 0.35 to 0.58. Among them IR 667 varieties showed relatively high intensities. 8. The range of total solids in residual liquids was 0.605 to 0.810 and the average was 0.700 Much difference was not shown in total solids in residual liquid between IR 667 varieties and japonica varieties. 9. pH values of residual liquids were in the range of 6.3 to 7.3 and the average was 6.95. IR 667 varieties showed lower pH than japonira type varieties.

• Journal of Korean Society of Forest Science
• /
• v.30 no.1
• /
• pp.19-29
• /
• 1976

The fiberboard and paper mills in this country are much affected by the price hikes and shortage of phenolic resins, since phenolic acid as a raw material depends on imported good. It is prerequisite to fiberboard industry to help replace with other sized and stabilize the prices and supply of them, improving the quality of boards. Thus, the present study was carried out to examine the effect of strength increasing sized such as urea formaldehyde resin (anion and cation type) and urea melamine copolymer resin, on the quality of the wet forming hardboard, and comparing them with two types of proprietary modified melamine resins, and ordinary size, phenol resin. The Asplund pulp was prepared from wood wastes mixed with 20 percent of lauan and 80 percent of pines as a fibrous material. After sizing agents were added at a pH of 4.5 for 10 minutes with alum in the beater, the stock was made in the form of wet sheet, prepared, and then performed by hot pressing cycle: $180^{\circ}C$, $50-6-5kg/cm^2$, 1-2-7 minutes. The properties of hardboard were examined after air conditioning. The results obtained are summarized as follows: 1. There is a significant difference in specific gravity among hardboards that were treated with strength increasing resins, but no difference is effected by the increase in the resin content. In the case of modified melamine resin, its specific gravity is highest. The middle group comprises cation type of urea resin, anion type of urea resin, and acid colloid of urea-melamine copolymer resin. The lowest is phenolic resin. 2. The difference of the moisture content of hardboard both by the resins and by the amount of each resin applied is significant. The moisture content of hardboard becomes lower along with the increase of each resin content, but there is no difference between 2 and 3 percent. 3. For water absorption, there is a significant difference both in the adhesives used and in the amount of paraffin wax emulsion. The water resistance becomes higher inn proportion to the content of the paraffin wax emulsion. To satisfy KS F standards of the water resistance, a proprietary modified melamine resin (p-6100) and modified cation type of urea resin (p-1500) do not require any paraffin wax emulsion, but in the case of anion type of urea resin, cation type of urea resin, and urea-melamine copolymer resin, 1 percent of paraffin wax emulsion is needed, and 2 percent of paraffin wax emulsion in the case of phenolic resin. 4. The difference of flexural strength of hardboard both by the resins and by the amount of each resin is significant. Modified melamine resin shows the highest degree of flexural strength. Among the middle group are urea-melamine copolymer resin, p-1500, anion type of urea resin, and cation type of urea resin. Phenolic resin is the lowest. The cause may be attributable to factors combined with the pressing temperature, sizing effect, and thermal efficiency of press platens heated electrically. 5. Considering the economic advantages and properties of hardboard, it is proposed that urea-melamine copolymer resin and cation type of urea resin be used for the development of the fiberboard industry. It is desirable to further develop the modified urea-melamine copolymer resin and cation type of urea resin through continuous study.