• Journal of the Korean Electrochemical Society
• /
• 제8권1호
• /
• pp.32-36
• /
• 2005

[ $WO_3$ ] and $NiO-WO_3$ thin films were deposited on a Si (100) substrate by using high vacuum thermal evaporation. The effects of various film thicknesses on the surface morphology $WO_3$ and $NiO-WO_3$ thin films were investigated. X-ray diffraction (XRD), Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy(XPS) were employed to characterize the deposited films. The results suggest that as $WO_3$ thin films became thick, their grain grew up to a $0.6{\mu}m$. On the other hand, NiO-doping to $WO_3$ thin films inhibited the grain growth five times less than undoped $WO_3$ thin films. This results show that NiO doping inhibited the grain growing of $WO_3$ thin films. Also, the variation of NOx sensitivity $(R_{NOx}/R_{air})$ to the thickness of $WO_3$ and $NiO-WO_3$ thin films were measured according to the thickness change of thin films and the working temperature of sensor in 5ppm NOx gas. As a result, $NiO-WO_3$ thin films showed more excellent properties than $WO_3$ thin films for NOx sensitivity.

• Korean Journal of Food Science and Technology
• /
• 제28권2호
• /
• pp.324-329
• /
• 1996

In order to develop a novel dewatering process for soybean milk residue, hydraulic press with ohmic heating was built and its expression conditions were examined. The electric conductivity of raw soybean milk residue was 0.128 S/m and increased linearly with increasing temperature. Water content of the residue could be reduced to 74% with the conventional hydraulic press, but to less than 70% by applying ohmic heating to the hydraulic press. The most effective dewatering was achieved by applying alternative current with 5 kHz frequency at 60 V during expression. The solid content of the expressed liauid was markedly reduced from 10% to 3.3% by ohmic heating during expression. Temperature of the cake rose to above $95^{\circ}C$ during the dewatering due to ohmic heating.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제30권4호
• /
• pp.623-629
• /
• 2001

This study was investigated the quality characteristics of sponge cakes which were prepared b replacing 30% of flour with raw starch and resistant starches, such as, 4 cycled autoclaved-cooled RS 3 maize starch(RS 3), cross-linked RS 4 maize starch (RS 4) was superior to control cake( 100% flour cake). Addition of starches except RS 3 made crust and crumb color lighter and decreased hardness. Especially, cake containing RS 4 had the softest texture. For the adhesiveness and cohesiveness, cake containing RS 4 showed the least changes during 5 storage days. In DSC measurement, cakes containing RS 4 and ARS 4 showed high enthalpy in despite of low hardness. Sensory evaluation showed that cakes containing RS 4 and ARS 4 were significantly moist and soft compared to others. Overall acceptability of cakes containing starch, RS 4 and ARS 4 were evaluated excellent. Therefore, it can be suggested that RS 4 and ARS 4 can be added to the sponge cake for the quality improvement and functional element.

• Food Science of Animal Resources
• /
• 제22권2호
• /
• pp.179-182
• /
• 2002

Using differential scanning calorimetry (DSC), changes underwent by a mixture of $\alpha$-lactalbumin ($\alpha$-La) and $\beta$-lactoglobulin ($\beta$-Lg) during heat treatment were studied, yielding useful information for the dairy industry. Results of the DSC showed that the heat denaturation temperature of the hobo-$\alpha$-La was higher than that of apo-$\alpha$-La, suggesting hole-$\alpha$-La‘s greater stability. The denaturation temperature of a mixture of holo-$\alpha$-La and $\beta$-Lg was also slightly lower than that of holo-$\alpha$-La alone. The denaturation temperature of an apo-$\alpha$-La and $\beta$-Lg mixture was higher than that of holo-$\alpha$-La and $\beta$-Lg, suggesting that the heat stability of apo-$\alpha$-La was increased by $\beta$-Lg. Based on these results, it is possible to conclude that a mixture of holo-$\alpha$-La and $\beta$-Lg is more intensively affected by an increase in temperature than other samples, and that free sulphydryl groups seem to take part in this heat-induced denaturation.

• Journal of the Korea Concrete Institute
• /
• 제23권3호
• /
• pp.347-352
• /
• 2011

When concrete is worked in cold weather, the methods of using hot air, water and aggregate heating, accelerators are used to prevent early frosting and to improve early strength. But these methods raise problems such as implementation difficulty, high cost, and energy losses. Among the available cold weathering methods, accelerator method is the most economical but with the drawbacks of rapid setting and insufficient workability in the initial hydration stage. Therefore, the tablet method usually used for pharmaceutical field was applied to the accelerator method to compare the controlled reaction time of the new and old accelerator method. Based on the test results, physical and mechanical properties of concrete were tested and the possibility of delaying initial reactions to increase the total reaction time was evaluated. The results showed that when both accelerators and tablet were used, setting-time decreased. Physical properties of concrete were optimal for tablet 0.5% and 1.0%. Also, accelerator 0.5%, tablet 0.5% and 1.0% showed good early strengths.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제37권2호
• /
• pp.256-260
• /
• 2008

In this study, the composition of saponin and physico-chemical properties of Korean red ginseng extract was analyzed based on various extracting conditions. The total saponin and individual ginsenoside concentration of the red ginseng extract showed a decreasing trend as the extracting temperature and time increased; also, the extracting condition at $75^{\circ}C$ for 24 hours showed the highest concentration. In contrast, the concentration of $Rg_3$ increased as the extracting temperature and time increased within the particular range. It was suggested that a certain part of ginsenosides changes to $Rg_3$ according to extracting conditions; thus, the concentration of $Rg_3$ increased. Physico-chemical properties of Korean red ginseng extract based on the extracting conditions were different compared to those for saponin; so, as the extracting temperature and time increased, brix and color difference increased but pH decreased indicating stabilization of the overall quality of the product. Therefore, the most appropriate extracting condition for both the product quality of Korean red ginseng extract and stable extraction of saponin was $80^{\circ}C$ within 48 hours, minimizing the loss of ginsenosides.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.477-480
• /
• 2002

Si-O-C(-H) thin film with a tow dielectric constant were deposited on a P-type Si(100) substrate by an inductively coupled plasma chemical vapor deposition (ICPCVD). Bis-trimethylsilymethane (BTMSM, H$_{9}$C$_3$-Si-CH$_2$-Si-C$_3$H$_{9}$) and oxygen gas were used as Precursor. Hybrid type Si-O-C(-H) thin films with organic material have been generated many voids after annealing. Consequently, the Si-O-C(-H) films can be made a low dielectric material by the effect of void. The surface characterization of Si-O-C(-H) thin films were performed by SEM(scanning electron microscope). The characteristic analysis of Si-O-C(-H) thin films were performed by X-ray photoelectron spectroscopy (XPS).

• KSBB Journal
• /
• 제10권4호
• /
• pp.449-454
• /
• 1995

The effects of metathesis for concentrating the tocopherols from soybean and rice-bran scum oils were studied by using the batch reactor under helium atmosphere. The contents of tocopherols in the scum oils decreased consticuously when heated under air atmosphere or when kept in hexane solution above 5 days even at room temperature. The sterols in the scum oils were removed by the mixed solvent method. Metathesis of the sterol-removed scum oils in hexane was performed over Re2O7/Al2O3 and WO3/Al2O3 catalysts, and the concentrate was obtained by distillation in vacuum at $190^{\circ}C$. The effect of metathesis was evaluated as relative ratio of ${\alpha}$-tocopherol in the concentrate to that in scum oil. The maximum ratio for both scum oils was obtained on 12.8%(w/w)$Re_2O_7/Al2O_3$ catalyst which formed effectively the active sites for metathesis by the reaction between the added tetramethyltin and $Re_2O_7$ on the surface of the catalyst. The optimum amount of the catalyst was 0.5g pre l0g scum oil, and the optimum reaction temperature was $25^{\circ}C$ for both scum oils. The metathesis was more effective in rice-bran scum oil than in soybean scum oil. These facts indicated that the tocopherols in the scum oils can be highly concentrated by applying metathesis.

• Korean Journal of Optics and Photonics
• /
• 제10권3호
• /
• pp.195-200
• /
• 1999

We made sharp optical fiber tips with less than 100 nm diameter by using the heating and pulling method with a good repetition and fabricated the photon scanning tunneling microscope (PSTM) using constant intensity mode. The 3-dimensional PZT (Piezoelctric transducer) scanner made of a long PZT tube is consisted of three divided parts, that is, a pair of $\pm$ x and a pair of $\pm$y scanning parts and a z scanning part for the fine approach and scanning. The scanning dimension is 1.43 $\mu\textrm{m}$$\times$1.76 $\mu\textrm{m}$. The height of a optical tip to maintain a constant height within $1/{\lambda}_0$ (${\lambda}_0$ is the incident wavelength) from surface of a specimen to a optical tip is controlled automatically by using the electric feedback circuit. The 3-dimensional shape of standing evanescent waves generated on the surface of a dove prism was measured successfully by using the constant intensity mode PSTM.

• Journal of the Korea Convergence Society
• /
• 제9권3호
• /
• pp.257-263
• /
• 2018

Hyperthermia supplies RF high-frequency energy above 1MHz to the tumor tissue through the electrodes. And the temperature of the tumor tissue is increased to $42^{\circ}C$ or more to cause thermal necrosis. A mathematical model can be derived a human body model for absorption and transmission of electromagnetic energy in the human model and It is possible to evaluate the distribution of temperature fields in biological tissues. In this paper, we build the human model based on the adult standard model of the geometric shape of the 3D model and use the FVM code. It is assumed that Joule heat is supplied to the anatomical model to simulate the magnetic field induced by the external electrode and the temperature distribution was analyzed for 0-1,200 seconds. As a result of the simulation, it was confirmed that the transferred energy progressively penetrates from the edge of the electrode to the pulmonary tumors and from the skin surface to the subcutaneous layer.