• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.6
• /
• pp.463-467
• /
• 2016

In this paper, acceleration and pressure exerted on a human model were measured under a supersonic condition in a shock tunnel. In order to measure these in an interference-free environment, free-fall technique with an electromagnet and a three-dimensional iron-powdered human model was used. Free-fall experiment was conducted at Mach 4 and the force acting on the model was obtained by calculating the displacement from the flow visualization images.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.318-323
• /
• 2012

This study is conducted to scrutinize agitation effects of an ultrasonic standing wave on the dynamic behavior of methane/air premixed flame. The propagating flame is caught by high-speed schlieren images, through which flame front and local flame velocity are analyzed and obtained, too. It is revealed that the propagation velocity with ultrasonic standing wave is larger than the case without excitation except around the flammability limits. Also, vertical locations of distortions and depth of dents of the front are constant, unless the ultrasonic standing wave characteristics are not changed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.2
• /
• pp.16-23
• /
• 2013

An experimental study has been conducted to investigate the effects of equivalence ratio on the propagation characteristics of $CH_4$-air premixed flame intervened by an ultrasonic standing wave. A Schlieren photography was used for the flame structure visualization, and the flame propagation behavior was investigated in detail throughout the post-processing analysis. It is found that the structural variation of methane/air premixed flame caused by the intervention of ultrasonic standing wave give rise to the enhancement of combustion reaction and flame propagation velocity. Effectiveness of the standing wave on the flame velocity decreases as the equivalence ratio increases. Larger flame velocity with the standing wave becomes undistinguishable in a specific range of equivalence ratios.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.229-229
• /
• 2020

최근 광학이미지 및 레이저를 활용한 계측 기술이 발전됨에 따라서 수공학 분야의 지리정보시스템(Geographic Information System, GIS) 및 원격탐사(Remote Sensing, RS) 기술의 활용 분야가 증가하고 있다. 광범위한 하천공간의 조사결과를 가시화하고 품질 및 활용성 제고를 위하여 GIS 및 RS 기술과 같은 고도화된 조사기술 및 장비의 도입하고 많이 활용하고 있다. 우리나라의 하천은 지형학적 특성으로 하천연장이 길고 접근성이 매우 불리하다. 하천정비 사업을 통하여 하천에 근접하게 접근할 수 있는 조건이 있다 하더라도 교목이나 지형지물에 의하여 시야 확보가 어려운 조사구간이 많다. 하천공간조사를 위한 드론 활용의 장점은 차량 및 도보로 접근이 어려운 조사대상에 접근하여 다양한 각도로 촬영하여 조사 목적에 부합하는 성과물 획득이 가능하다. 한국수자원조사기술원은 하도특성(평면, 사행 및 종횡단 조사)을 사전에 하천기본계획 보고서에서 곡률반경과 만곡도, 유심편향축, 최심하상경사 및 평균하상경사 등을 수집하고 현장에서 드론을 활용하여 접근조사가 어려운 항목에 대하여 드론을 적극적으로 활용하여 조사하고 있다. 드론을 활용할 경우 인력 및 소요시간이 대폭 절감되며 조사목적에 부합하는 다양한 조사 성과물을 얻을 수 있은 장점이 있다. 최종적으로 촬영된 영상자료는 넓은 범위의 하천공간을 고해상도 수치 지도화가 가능해 하천특성을 정량적으로 평가할 수 있을 것으로 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.13-18
• /
• 2019

The DEM(Digital Elevation Model) is a three-dimensional spatial information that stores the height of the terrain as a numerical value. This means the elevation of the terrain not including the vegetation and the artifacts. The DEM is used in various fields, such as 3D visualization of the terrain, slope, and incense analysis, and calculation of the quantity of construction work. Recently, many studies related to the construction of 3D geospatial information have been conducted, but research related to DEM generation is insufficient. Therefore, in this study, a DEM was constructed using a MMS (Mobile Mapping System), UAV image, and UAV LiDAR (Light Detection And Ranging), and the accuracy evaluation of each result was performed. As a result, the accuracy of the DEM generated by MMS and UAV LiDAR was within ± 4.1cm, and the accuracy of the DEM using the UAV image was ± 8.5cm. The characteristics of MMS, UAV image, and UAV LiDAR are presented through a comparison of data processing and results. The DEM construction using MMS and UAV can be applied to various fields, such as an analysis and visualization of the terrain, collection of basic data for construction work, and service using spatial information. Moreover, the efficiency of the related work can be improved greatly.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.7
• /
• pp.585-592
• /
• 2016

Visualization was done by using $CH^*$ chemiluminescence images and PMT measurements in order to understand the origin of fluctuating pressure and chemical luminosity at about 500 Hz frequency even in stable combustion, which was observed in recent experimental tests, and to find the physical correlation leading to Low Frequency Instability(LFI) in terms of phase angle. In stable combustion, chemical reactions are distributed along the shear layer flow showing a negative coupling(about 180 degree in phase angle) with combustion pressure. However, phase difference is shifted to a positive coupling showing less than 90 degree in unstable case. Also a periodic change in the distribution of chemical reactions is observed along with local flame extinction and the appearance of big scale vortex flow. In the transition to LFI, local flame extinction and small vortex flow start to appear in a row. As seen in the bluff body wake in reactive flow, the periodic appearance of vortex flow seems to share the same physical process of BVK(Bernard Von Karman) instability generation. Thus, the appearance of local extinction in 500 Hz fluctuations is gradually amplified to complete extinctions of about 20 Hz, and it leads into LFI.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.4
• /
• pp.131-144
• /
• 2015

This research proposes a prototype for visualizing radar rainfall data using the unity 3D engine. The mashup of radar data with topographic information is necessary for the 3D visualization of the radar data with high quality. However, the mashup of a huge amount of radar data and topographic data causes the overload of data processing and low quality of the visualization results. This research utilized the Unitiy 3D engine, a widely used engine in the game industry, for visualizing the 3D topographic data such as the satellite imagery/the DEM(Digital Elevation Model) and radar rainfall data. The satellite image segmentation technique and the image texture layer mashup technique are employed to construct the 3D visualization system prototype based on the topographic information. The developed protype will be applied to the disaster-prevention works by providing the radar rainfall data with the 3D visualization based on the topographic information.

• The Journal of the Korea Contents Association
• /
• v.5 no.3
• /
• pp.103-111
• /
• 2005

By international lighting market's growth and domestic landscape lighting market's growth, the latest lighting market is activated. But, They are doing price competition that domestic lighting technology and development technology of lighting fixtures design do not possess international competitiveness than these change. Specially, as image of area and the country can be influenced greatly by cityscape at present visual point that many interests are converged country and identity establishment of local government, many cities are using force hereupon. Constructs which cityscape is various including natural ecology area of life environment gather and are done Image creation and this people's consciousness and culture living soon inside thing which do speaking by proxy be. Than city's night view nature lighting more than by spectacle lighting along with life lighting to basis materialize can. It is meaning more than thing that fine view of city becomes beautiful simply that night view of city becomes superior, that means that city efficiency and quality of life are exalted by a word. Wish to establish effective lighting technology and new product design process through PLS lighting technical development and 300 W lighting fixtures design development hereupon, and raise domestic spectacle lighting market's localization and domestic lighting market's competitive power furthermore.

• The Journal of the Korea Contents Association
• /
• v.16 no.9
• /
• pp.443-450
• /
• 2016

Korean biopharmaceutical industry is a high value-added industries of the country as a key business strategy of the country. The overseas market is accelerating rapidly due to drug demand according to population aging, new drug R&D investment performance visualization, changes in biopharmaceutical R&D center, strategic foreign technology exports, and the active support of government. Therefore, the domestic pharmaceutical companies also should enhance the competitiveness as global pharmaceutical companies and need to build the image of their own company that can be trusted by consumers. This study compared and analyzed visual characteristics shown in the CI symbol mark and age-specific preferences of domestic pharmaceutical companies recognizing the importance of CI as a marketing tool. As a result, preference for the symbol mark had been shown to be significantly higher preference of the old logotype as the age group is higher being proportional to awareness. In addition, the picture-type symbol mark was totally preferred rather than the word mark. Among the picture-type symbol mark, the form of the nature was strongly preferred rather than abstract form. The company also requires a sense of responsibility for recognizing changes in the mass to the globalization. It is hoped that this study will help to develop symbol mark direction as the basis for the identity strategies to improve the image of domestic pharmaceutical companies with global competitiveness.

• Analytical Science and Technology
• /
• v.30 no.5
• /
• pp.279-286
• /
• 2017

Determination of the order of latent fingerprints deposition on the surface of thermal paper, often found in crime scenes, is related to the study of time course and aging of fingerprints and can provide additional information in criminal investigations. A preliminary study was performed to determine the deposition order of fingerprints left with two different conditions of deposition pressure and time (in seconds) after 1 day intervals for 7 days on thermal paper (receipt and fax thermal paper) using an iodine fuming method. The resultant images of the visualized fingerprints were analyzed with densitometric image analysis to measure the changes in the areas of the ridges, which can be correlated to the deposition order. No significant variation was found with the different types of thermal paper. The average areas of the friction ridges increased gradually or were similar to the values from day 1 for 3 days, and then a continual decrease was shown from day 4 through day 7. The area values from day 6 and day 7 were less than half of those from day 1. Furthermore, the test with overlapped fingerprints showed the possibility of differentiation between fingerprints that are 1-3 and 6-7 days old based on the clarity visible to the naked eye. Additional experiments with the deposition conditions can prove that the current method is valuable for the determining the order of fingerprint deposition on thermal paper.