• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.137-139
• /
• 2023

MARPOL (Maritime Pollution Treaty) 부속서 (Annex VI) 경우 대기오염 규제 내용이며, 최근 선박 배기가스 배출규제 강화 목적 개정됨에 따라 관련 규정을 충족하기 위한 적극적인 조치가 요구된다. 예를 들어 Sulfur Dioxide (SOx, 황산화물) 경우 2020년 기준 전 세계 해역 내 운항하는 선박은 황 함유량 0.5% 기준의 배출 요구 기준을 충족해야 한다. 배출규제 해역 지정 시 해당 해역 선박 배기가스 배출량 계산 산정 기준 확립이 필요함에 따라 대기환경에 대한 종합적인 분석이 필수적으로 요구된다. 본 연구에서는 황산화물 배출량 산출 방법론으로써 그리드 셀 내 선박 점유시간을 계산한다. 점유시간이 길수록 선박 통항 및 배기가스 배출이 밀집되어 있음을 의미한다. 밀집도 분석에 더불어 선박의 특성이 반영된 시간당 배출량을 적용하여 배출 공간 인벤토리를 구축하였으며 분석 결과를 GIS (Geographical Information System) 환경에서 공간 지도로 시각화하였다. 기존 국내 황산화물 배출규제 해역의 효과 평가에 더불어 외항 범위까지 규제 확대 시나리오확립 후 비교 평가를 통하여 배출량 감소 효과를 정량적으로 확인하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4D
• /
• pp.323-330
• /
• 2010

The time in port for vessels is one of the important factors for analyzing the operation status and the capacity of ports. In addition, the time in port for vessels can be directly used for estimating the greenhouse gas emissions resulted from vessels in port. However, it is unclear which variables can affect the time in port for vessels and what the marginal effect of each variable is. With these challenges in mind, the study analyzes the time in port for vessels arriving and departing port of Busan by using a parametric survival model. The results show that the log-logistic accelerated failure time model is appropriate to explain the time in port for 19,167 vessels arriving and departing port of Busan in 2008, in which the time in port is significantly affected by gross tonnage of vessels, service capacity of terminal, and vessel type. This study also shows that the greenhouse gas emission resulted from full-container vessels, which accounted for about 61% of all vessels with loading/unloading purpose arriving and departing port of Busan in 2008, is about "17 ton/vessel" in the boundary of port of Busan. However, the hotelling greenhouse gas emissions resulted from non-container vessels (3,774 vessels; 20%) are greater than those from the full-container vessels. Hence, it is necessary to take into account more efficient port management polices and technologies to reduce the service time of non-container vessels in port of Busan.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.4002-4006
• /
• 2014

The automotive exhaust gases generated by the vehicles containing carbon monoxide, hydrocarbons and lead, is a large concern because of their harm to human health or the living environment. To reduce exhaust gas, it is important to develop a variety of techniques that are currently being used by elemental analysis to determine the optimal conditions. In this study, the anti-freeze coolant contained in the exhaust gas was examined, which can affect the emissions. The effects of the commercially available coolant from five domestic companies on the HC, NOx and $CO_2$ emissions were analyzed to determine the optimal amount of antifreeze. In addition, antifreeze products from the five companies were analyzed with respect to driving time of the cooling fan and the correlation of the NOx emission analysis. The temperature of the engine oil was matched using a manual gear of small passenger inspection standard speed $40{\pm}2Km/h$ so the vehicle could meet the specifications for inspection $90{\sim}93^{\circ}C$. The Company D fan operation time resulted in the shortest antifreeze, $CO_2$ and NOx emissions.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1999.04a
• /
• pp.9-14
• /
• 1999

1. LPG 온풍기는 용량 16$\times$$10^4$ ㎉ 건타입가스버너, 연소부 및 열교환부, 6개의 50kgLPG탱크와 자동절체기, 가스메타, 배관으로 구성하였다. LPG 온풍기의 이론연소효율은 91%, $CO_2$ 배출량은 11.74%, CO배출량은 0ppm, 과잉공기비는 1.16, 배기가스온도는 253$^{\circ}C$, 온풍온도는 8$0^{\circ}C$로서 우수한 성능으로 나타났다. 2. LPG온풍기에서 배출되는 배기가스중의 $CO_2$ 를 온실로 공급하기 위하여 $CO_2$ 공급기를 제작하여 배출가스연도에 부착하였다. $CO_2$ 공급기는 흡입형 시로코팬(1200㎥/h)과 차단문으로 이루어졌다. 1-2W형 300평 온실내의 $CO_2$ 농도를 1000ppm으로 올리기 위해서는 $CO_2$ 공급기를 약 1시간 정도 운전시켜야 할 것으로 판단되었다. 3. LPG온풍기와 경유온풍기의 경제성 비교분석에 의하면 현 시점의 경유 가격 242원, LP가스 가격 435원을 기준으로 연간소요비용은 각각 5,392,430원, 5,299,917원으로 경유온풍기가 10만원 정도 경제적이지만 탄산가스 시용비용, 탄산가스 공급으로 인한 작물의 수량증대 및 고품질 생산물을 고려한다면 LPG온풍기 사용이 더 경제적이라 사료된다.

• Journal of Korean Society of Transportation
• /
• v.34 no.5
• /
• pp.377-393
• /
• 2016

Vehicle emissions have been known as a critical factor to give a negative impact on the public health. In particular, particulate matters(PM) and NOx are highly related with respiratory diseases such as asthma. This study aimed at analyzing spatio-temporal patterns of PM and NOx generated from urban freeway traffic. MOVES, which is a well-known emission analysis tool presented by US Environmental Protection Agency(EPA), was applied to estimate PM and NOx based on traffic volume and speed data obtained from Seoul Outer Ring Expressway during January~June, 2012. K-means clustering analysis was used for categorizing the Level of Vehicle Emissions(LOVE) to support more systematical identification of the significance of emissions. Then, spatio-temporal analyses of estimated emissions were conducted by LOVE. Finally, this study proposed a set of strategies to reduce both PM and NOx to enhance public health based on analysis results.

• Journal of the Korean Institute of Gas
• /
• v.23 no.2
• /
• pp.68-73
• /
• 2019

We proposed a method to convert the CO2 emission data of vehicles collected from the chassis dynamometer test from distance unit to energy unit which generally measured from the engine dynamometer tests. In the future, if engine dynamometer tests are limited, it is expected to be applied as an alternative method to calculate CO2 emission based on energy unit through the chassis dynamometer test. At this moment, engine efficiency is required and the test mode average efficiency should be used to improve the accuracy, not the result derived from specific speed and load conditions. Also, this method was applied to foreign data and the results were within 0.2%. However, CO, NOx and THC which have very low emission characteristics except CO2, are limited by the method proposed in this study and need to be considered separatively.

• Journal of Energy Engineering
• /
• v.22 no.2
• /
• pp.128-135
• /
• 2013

In order to estimate the combustion characteristics and the gas interchangeability for natural gas with various compositions per each production area, equivalent gas are using to replace natural gas. It is known that an equivalent gas has the same the heating value, the compression factor, the relative density, CO emission and the burning velocity as the original natural gas. However, it is not reported that the flame shape and thermal efficiency and NOx emission by real gas appliance. In this study, equivalent gas was examined the validation to replace natural gas. The CO emission the burning velocity and the flame temperature were reconfirmed, and the flame shape, the NOx emission and the thermal efficiency were numerically and experimentally investigated. As results, there was not a large difference between natural gas and equivalent gas. This result demonstrated that there was no problem using equivalent gas to replace natural gas.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.1
• /
• pp.35-40
• /
• 1997

This study was conducted to investigate methane emission under different rice cultural practices in paddy soil (Jeonbug Series, occurring on fluvio-alluvial plain). The rates of application of fresh rice straw were 5,000kg/ha in combination with 110 and 160kg N/ha as chemical fertilizer. The methane emission among the rice cultural practices was in the order of transplanting cultivation, direct seeding on flooded surface and direct seeding on dry paddy field. The average methane flux was $10.27mg/m^2/h$ in direct, seeding on dry paddy field and $24.1mg/m^2/h$ in transplanting cultivation. The diurnal variation of methane emission at heading stage was high from 9 a.m. till 7 p.m. and the methane emission rate was highly correlated with air temperature fluctuation and soil Eh. The seasonal change of methane flux was high from ear formation stage to heading stage.

• Composites Research
• /
• v.18 no.5
• /
• pp.27-33
• /
• 2005

In this research, the mathematical modelling of the pulse-CVI (Chemical Vapor Infiltration) for the preparation of siliconcarbide/carbon composite. Each pulse consists with the gas injection time, the reaction time and the evacuation time. Effects of the reaction time and the evacuation time were studied. Additionally, the effects of the reactant concentration and the pressure were observed. The benefits of the pulse-CVI such as the uniform infiltration of siliconcarbide into the carbon preform and the short reaction time were certified.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11b
• /
• pp.179-180
• /
• 2003

자동차 도장 작업 시 배출되는 대표적인 용매물질인 부틸아세테이트, n-부탄올 및 톨루엔을 대상기체로 하여 활성탄에 의한 흡착 특성을 연구결과는 다음과 같았다. 처리대상가스의 유입농도가 증가할수록 파과시간은 점점 감소하였으며. 파과곡선의 기울기 또한 급격해졌다. 유량이 증가할수록 파과시간은 감소하였다.