• Journal of the Korean Society of Marine Environment & Safety
• /
• v.2 no.1
• /
• pp.1-10
• /
• 1996

초음파는 액체 및 고체의 매질 속에서도 그 전달 특성이 우수하여 수중 물체의 감지, 지질 조사 자원탐사뿐만 아니라, 의학 분야에서도 널리 사용되고 있다. 물체유동정보 측정방식에는 연속파를 이용한 도플러식과 펄스 신호를 이용한 도플러는 거리 분해능이 좋으므로 깊이에 따른 속도 정보를 쉽게 얻을 수 있는 장점이 있으나, 수신되는 도플러 신호가 탐촉자의 특성과 매질 속에서의 전파특성 등에 의하여 송신된 신호와 파형이 다르고 복잡한 주파수 특성을 가지므로 연속파에서와 같이 도플러 주파수를 직접 측정하기 곤란하다. 도플러 주파수를 검출하기 위하여 여러 방법이 개발되어 있으나, 측정거리와 측정속도의 제약과 더불어, 실시간(real time) 처리에 의한 분포적 측정이 어려운 실정이다. 본 연구에서는 시간 영역에서 국소 데이터를 이용하여 펄스 신호의 위상을 정의하고 실시간에서 펄스 신호를 위상으로 변환하는 신호 처리법을 제안하였다. 또한 이 신호 처리법을 응용하여 측정 범위의 위상 곡선에서 위상 차를 계산함으로써 평균 가속도와 유동속도정보를 분포적으로 얻을 수 있는 새로운 펄스 도플러 기법을 제안하였으며, 모델 신호를 만들어 제안된 방법의 유용성을 검토하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1564-1572
• /
• 2010

In this study, the falls detection and direction classification system was implemented using 3-axial acceleration signal. The acceleration signals were acquired from the 3-axial accelerometer(MMA7260Q, Freescale, USA), and then transmitted to the computer through USB interface. The implemented system can detect falls using the newly proposed algorithm, and also classify the direction of falls using fuzzy classifier. The 6 subjects was selected for experiment and the accelerometer was attached on each subject's chest. Each subject walked in normal pace for 5 seconds, and then the fall down according to the four direction(front_fall, back_fall, left_fall and right_fall) during at least 2 second. The falls was easily detect using the newly proposed algorithm in this study. The acquired signals were analyzed after 1 second from generating falls. The fuzzy classifier was used to classify the direction of falls. The mean value of the falls detection rate was 94.79%. The classifier rate according to falls direction were 95.83% in case of front falls, 100% incase of back falls, 87.5% in case of left falls, and 95.83% in case of right falls.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.06a
• /
• pp.273-276
• /
• 2011

우리는 감성 공학에 기반하여 일상 생활 속에서 비침습적이면서 사용하기 간편한 광전용적맥파신호를 계측하고 분석하는 이어폰형 생체 신호 측정 시스템에 관하여 연구하였다. 생체 신호 측정 시스템에서는 광전용적맥파(photoplethysmograph, PPG)와 3축 가속도로 생체 신호와 운동 신호를 활용하였다. 수신된 생체 신호인 광전용적맥파 신호는 Peak 검출 및 전처리 알고리즘을 통하여 심박동변동성(heart rate Variablity,HRV)에 대한 시계열 정보로 변환하고 고속 퓨리에 변환(Fast Fourier Transfirm, FFT)과 전력 스펙트럼 밀도 분석(Power Spectrum Density, PSD)방법으로 교감과 부교감 신경 활성도 변화를 관측하였고, 운동 센서로 움직임을 관측하였다. 수신부 시스템은 안드로이드 기반의 자바 어플리케이션으로 스마트 폰에서 구현하였고, 송신부인 이어폰 생체정보 측정모듈로 맥파를 측정하여 상황에 따라 변화하는 자율 신경계의 활성도비율을 확인하였다.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.2
• /
• pp.67-74
• /
• 2017

This paper proposes a method of user authentication through the patterns of arm movement with a wrist-type wearable device. Using the accelerometer sensor which is built in the device, the 3-axis accelerometer data are collected. Then, the collected data are integrated and the periodic cycle are extracted. In the cycle, the features of frequency are generated with the accelerometer. With the frequency features, 2D Gaussian mixture are modelled. For authenticating an user, the data(the accelerometer) of the user at some point are tested with confidence interval of the Gaussian distribution. The model showed a valuable results for the user authentication with an example, which is average 92% accuracy with 95% confidence interval.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.161-170
• /
• 2020

In this study, develop the seismic acceleration measurement data conversion and signal processing algorithms for improve the operational efficiency of the seismic acceleration measurement system installed for public facilities. Through the analysis of the seismic acceleration time history data, the evaluation methods and criteria and evaluating the safety of buildings were proposed. The system was applied to the test bed building to verify its operation and usability. It is expected to be used as a decision making support data and determining the direction and priority of disaster response in the event of an earthquake.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.722-727
• /
• 2009

The technology of distinguishing human motion states is required in the areas of measuring and analyzing biosignals changing according to physical activities, diagnosing sleep disorder, screening the effect of treatment, examining chronic patients' kinetic state, prescribing exercise therapy, etc. The present study implemented a fuzzy inference system based on fuzzy rules that distinguish human motion states (tying, sitting, walking, and running) by acquiring and processing data of LAA, TAA, L-MAD, and T-MAD using ADXL202AE of Analog Devices embedded in an armband. The membership degree and fuzzy rules in each area of input (LAA, TAA, L-MAD, and T-MAD) and output (tying, sitting, walking, and running) data used here were determined using numeric data obtained from experiment. In the results of analyzing data for simulation generated in order of tying$\rightarrow$walking$\rightarrow$running$\rightarrow$tying, the sorting rate for motion states tying, sitting, walking, and running was 100% for each motion.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.5
• /
• pp.401-407
• /
• 2021

The continuous active sonar technology is effective for detecting and tracking targets because of short target revisiting rate. Generalized Sinusoidal Frequency Modulation (GSFM) pulses suitable for continuous active sonar systems are known to be capable of obtaining high time-bandwidth product while maintaining the orthogonality between pulses. However, it is unknown how to calculate an appropriate length of time to correlate received GSFM pulses in the presence of a target with acceleration. In this paper, we propose a method to calculate the appropriate time length based on the correlation when matching the received signal in the continuous active sonar system using GSFM pulse. The proposed method calculates the correlation according to the acceleration of the target and calculates the signal processing length according to the correlation. It is shown that stable detection performance can be obtained when the signal processing length calculated by the proposed method through the level of the sidelobe is applied.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.250-255
• /
• 1994

본 논문에서는 응답함수가 속도, 가속도 신호인 경우 그 전달함수로부터 각 모우드의 상대적 중요도를 평가할 수 있는 방법을 개발하고자 한다. 또한 실제 실험에서와 같이 샘플링된 신호로부터 추정한 이산시간 전달 함수로부터 모우드의 상대적 중요도를 직접 평가할 수 있는 방법을 개발하고자 한다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.5
• /
• pp.21-27
• /
• 2008

Despite recent studies on development of pulse diagnosis systems and needs for commercializing them, the reproducibility is one of the most controversial issues as ever. Because the pulse pressure value, which is one of the important parameters to evaluate reproducibility, is very vulnerable to moving artifacts, the reproducibility can not be obtained easily. In this paper, we suggested a moving artefacts detection system for a pulse diagnosis system so that a pulse diagnosis system can be robust to theses kinds of artefacts by excluding the contaminated parts from the pulse wave signal to be analyzed. This moving artifacts detection system was designed to consist of a three-axis accelerometer, an electromyography amplifier and a two-axis tilt sensor. To assess the suitability of the system, we examined the characteristics of each sensor's output signals with regard to the three specific motions such as extension, flexion and rotation. And, we also examined the each sensor's response to the high-frequency and low-frequency moving artifacts while the pulse wave signal was acquired from a pressure sensor for the pulse diagnosis. From these results, we could find that the response to subject's motions would be reflected in electromyography signal first, in accelerometer signals and in tilt sensor sequently. And, the facts that a stable pulse wave can be acquired in two seconds after high frequency or low frequency motions ended, were also found. Consequently, based on these findings, we set up some rules on the moving artifacts detection and designed an algorithm which is fit for our moving artifacts detection system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.239-243
• /
• 2001

본 연구에서는 절삭중 공구파손을 실시간으로 검출할 수있는 시스템을 구성하기 위한 일환으로 일차로 AE(acoustic emission)센서를 사용하여 mechanism의 특성과 공구파손에 따른 주파수 특성을 해석했고, 차후 연구로서 AE센서가 아닌 가속도센서와 전류센서 및 공작기계의 절삭동력계를 이용한 복합계측시 스템을 구성하여 절삭특성 및 공구파손이 발생할 때의 신호특성을 해석했다.