Journal of the Korea Academia-Industrial cooperation Society
/
v.17
no.10
/
pp.499-508
/
2016
Injection molding is a method for manufacturing many products, wherein a plasticized resin is injected into a mold at high pressure and hardened. According to the method, the product can be manufactured into various forms, and the mass production of up to tens of thousands of products is possible. The purpose of this study was to determine the process conditions for manufacturing a door latch for automobiles, through an analysis of the injection molding method. To calculate an appropriate injection flow for injection molding, a primary analysis for comparing the injection time, pressure, flow pattern, consolidation range, shear stress, shear rate, and weld line, as well as a secondary analysis for determining the conditions for stabilizing the molding temperature, holding pressure, and cooling process, were conducted. The characteristics of injection molding, and their influence on the product quality are discussed. No weld line and pores were observed on the products that had been manufactured based on the process conditions determined above. In addition, there were no flaws regarding the deformation compared to the prototype. Therefore, the manufacture of a product under the conditions determined in this study can reduce the defect rate compared to the existing production, and the process is also more competitive due to reduced production time.
The thermotropic liquid crystalline behavior of a homologous series of poly[1-{4-(4' nitrophenylazo) phenoxycarbonylalkanoyloxy}ethylene]s (NAPEn, n = $2{\sim}8$,10, the number of methylene units in the spacer) have been investigated. All of the homologues formed monotropic nematic phases. The glass transition temperatures decreased with n. This is attributed to a plasticization of the backbone by the side chains. The isotropic-nematic phase transition temperatures decreased with increasing n up to 7 and showed the odd-even effect. However it became almost constant when n is more than 7. This behavior was rationalized in terms of the change in the average shape of the side chain on varing the parity of the spacer. This rationalization also accounts for the observed variation of the entropic gain for the clearing transition. The mesophase properties of NAPEn were entirely different from those reported for the polymers in which the azobenzene groups are attached to polyacrylate, polymathacrylate, and polystyrene backbones through polymethylene spacers. The results indicate that the mode of chemical linkage of the side group with the main chain plays an important role in the formation, stabilization, and type of mesophase.
Dang-Chin feldspar powder with the mean particle size of 9.1 $\mu\textrm{m}$ was added to the synthesized mullite powder with the particle size of +325∼-200 mesh and the powder compact was prepared by PLPP(pressureless powder packing method). Densification behaviors were observed in sintering temperature range of 1200∼1400$^{\circ}C$. The binder solution of 4% PVA was infilterated into packed powder to the suitable strength. The PLPP method makes it possible to form compacts without clay as plasticizer. Therfore there was no defect caused by phase transition after sintering. Additionally, we observed the dense microstructure by the melting of feldspar. When the mullite compacts with feldspar of 30% were sintered at 1300$^{\circ}C$-4 hrs, we obtained the dense microstructure with zero water absorption and porosity <1%. When these compacts were sintered longer than 4 hrs at 1300$^{\circ}C$ or higher than 1400$^{\circ}C$, the examggerated grain growth of mullite was observed.
Field experiment was conducted from 1991 to 1993 at $Allg\ddot{a}u$ south western Germany to determine the effects of cutting frequencies on the yield and growth responses in intensively used grassland. Cutting frequency, 3 cutting(reduced) and 6 cutting(conventional) were tested. The yield, protein content, in vitro digestible dry matter and net energy value were markedly reduced with 3 cutting. Distribution ratio of grasses and legumes was not different between 3 and 6 cutting frequencies. However, the distribution of Dactylis glomerta at 3 cutting frequency was increased and that of Lolium perenne decreased. Nitrogen uptake by the plants at 6 cutting frequency was higher, 443kg/ha, than 308kg/ha of 3 cutting frequency.
Forage productivity of cropping systems of rye - silage corn, silage corn - oats, silage corn - rape was studied in the south-eastern part of Korea where rice black-streaked dwarf virus(RBSDV) infection of corn are severe. Rye(cv. Paldanghomil) was planted on Oct. 20 of 1986 and harvested 10 times from April 5 to May 5 at the 5-day intervals in 1987, corn (cv. Suweon 19 and Jinjuok) was planted 5 times from April 5 to May 15 at the 10-day intervals in 1987, and oats(cv. Megwiri) and rape (cv. Velox) were planted 4 times from Sept: 4 to 25 at the 7-day intervals and harvested 4 times from Nov. 10 to Dec. 10 at the 10-day intervals in 1987. Considering yield, nutrition value, and in vitro dry matter digestibility (IVDMD), forage productivity of the cropping systems was compared. As harvesting time of rye delayed, plant height, dry matter(DM) yield, percent DM, crude fiber, and digestible DM yield increased, but crude protein, crude fat, and IVDMD decreased. However, nitrogen free extract was not different among the harvesting dates. As planting date of corn delayed, RBSDV infection rate increased. but DM yield of silage decreased. However, silage yield of Jinjuok was higher, but RBSDV infection rate was lower compared with Suweon 19 at all planting dates. DM yield of oats and rape decreased as planting date delayed. However, at Sept. 4 and 11 plantings yield of oats on Nov. 10 was much lower than that of rape, but the differences in yield between two crops decreased with delayed harvesting, and yield was similar on Dec. 10. A cropping system harvesting rye around April 20 and followed by planting corn in late April was best among the rye-corn systems considering yield and nutrition value of both crops. However, among the corn-oats or corn-rape cropping systems early April planting of corn and followed by early Sept. planting of oats or rape showed best results with similar yield potential of the best rye-corn cropping system.
EpoxidiBed soy bean oil (ESBO) is a plasticizer of PVC which is being widely used as a gaskets for the lid of glass jars including baby food. Using reverse mutation assay, chromosome aberration test and micronucleus test, ESBO were evaluated the mutagenicity. In the reverse mutation test, ESBO did not induced mutagenicity in Salmonella typhimurium TA98, TA100, TA1535, TA1537, TA102 with and without metabolic activation. In the chromosome aberration test using CHL cells, the results showed no increased structural and numerical aberrations in the concentration of sample producing cytotoxicity with and without metabolic activation. The in vivo induction of micronuclei was measured in polychromatic erythrocytes of bone marrow of young (3weeks old) and adult (6 weeks old) ddY mice of both sex. At 24 hours after treatment with ESBO 20, 10, 5, 2.5 g/B.W. kg/corn oil 10 ml by oral route animals were sacrificed and bone marrow cells were prepared for smear slides. The results showed no increased micronucleated polychromatic erythrocytes regardless of sex and age. It was concluded that water soluble ESBO did not show certain genotoxicity within our studies conducted.
NCO-terminated prepolymers were synthesized by reacting carbonate-type polyol(PTMCG)($M_w=1,000$ and 2,000) with MDI and N-methyldiethanolamine, as a chain extender. Carbonate-type polyurethane containg zwitterionic group was prepared by reacting the prepolymer with 1,3-propane sultone. From the IR and NMR spectra of model reactions, it was known that the ionization occurred under the same condition. The structure of zwitterionic carbonate-type polyurethane(ZPU) therefore could be confirmed from the model reactions. Glass transition temperature(Tg) ranged between $-15{\sim}-30^{\circ}C$ from the thermal data. Tg was between $-15{\sim}-18^{\circ}C$ for a series of ZPU10 samples and between $-25{\sim}-26^{\circ}C$ for a series of ZPU20 polymers. Tensile strength increased with mole ratio of ionic content. On the contrary, elongation was rather dropped with mole ratio of ionic content. ZPU10-30 having better tensile strength and less elongation was selected as a membrane for the concentration of ethanol aqueous solution through pervaporation. To obtain the better selectivity, it was crosslinked with HMDI. In the swelling test, it showed the higher swelling degree at around 50wt% ethanol concentration due to the plastization effect of ethanol. To optimize the separation capacity, two operating factors-feed concentration and temperature-were considered. The overall separation capacity was as follows : separation factor, 2~83.2 ; the flux, $25.4{\sim}58.8g/m^2hr$.
Phthalate esters that are used as plasticizers and also found at low levels in foods such as dairy products are often mentioned as suspected endocrine disrupters. The purpose of the present study is to elucidate whether perinatal exposure to di-n-butyl phthalate(DBP), diisononyl phthalate (DINP) and di-2-ethylhexyl adipate (DEHA) affects several aspects of reproductive function in rats especially sexual differentiation of the brain. To this end, the dams were provided with pulverized soy-free diet containing 20, 200, 2,000 and 10,000 ppm of DBP, 40, 400, 4,000 and 20,000 ppm of DINP, or 480, 2,400 and 12,000 ppm of DEHA from gestational day (GD) 15 to postnatal day (PDN) 21, the day of weaning, and serum sex steroid hormone, gonadotropin levels and sexual behaviors after maturation were assessed. At Postnatal week (PNW) 20-21, serum levels of sex steroids and gonadotropins in both male and female rats, as well as estrous cyclicity in females, were not changed by perinatal exposure to DBP, DINP and DEHA, indicating that these chemicals did not affect sexual differentiation of the brain controlling the endocrine system of hypothalamo-pituitary-gonadal (HPG) axis. On the other hand, inhibitory influences on sexual behaviors, especially on ejaculation in males and lordosis in females, were observed by perinatal exposure to these chemicals. These results suggest that these chemicals may act directly on discrete regions of the hypothalamus regulating sexual behaviors, but not regulating gonadotropin secretion, thereby affect sexual differentiation of the brain with a resultant decrease in sex-specific behaviors in adulthood.
The thermal decomposition of simulated Magnox highly active waste and of HARVEST feed slurries (SW and SG) which include tile glass forming chemicals has been studied. The waste and the slurries are almost completely calcined by 500-55$0^{\circ}C$. The colour of the solids from the slurries varies little until about 90$0^{\circ}C$ when it darkens considerably. The slurries begin to vitrify at this temperature and are completely vitrified at 1000-105$0^{\circ}C$. On the other hand. the sulphate impurity in SN slurry causes a yellow phase to separate above 75$0^{\circ}C$. The density of the intermediate solids is fairly low until 650$^{\circ}$-$700^{\circ}C$ is reached. This temperature seems to mark the onset of fluxing as tile density rises quickly to 2g/㎤ at 700$^{\circ}$ -80$0^{\circ}C$. The strengh of the solids decreases with temperature up to 50$0^{\circ}C$, and then rises as the solids begin to sinter. Below 50$0^{\circ}C$ the SN solids are the stronger. suggesting that the impurity renders this silica more reactive.
As awareness of environmental issues continues to grow, there is an escalating demand for recycling and repurposing byproducts of agricultural and food production processes and their conversion to high-value products. Coffee is the most widely consumed beverage globally; during coffee beverage processing and consumption, byproducts such as coffee silverskin (CS), spent coffee grounds (SCGs), and oil are generated. Despite containing beneficial materials such as cellulose, hemicellulose, lignin, lipids, and bioactive substances, these byproducts are typically discarded in landfills or incinerated. The utilization of CS, SCGs, and oil in the development of packaging materials holds significant potentials toward the realization of a sustainable society. To this end, considerable research efforts have been dedicated to the development of high-value materials derived from coffee byproducts, including functional fillers, polymer composites, and biodegradable polymers. Notably, CS and SCGs have been employed as functional fillers in polymer composites. Additionally, lipids extracted from SCGs have been used as plasticizers for polymers and cultured with microorganisms to produce biodegradable polymers. This review focuses on the research and development of polymer/CS and polymer/SCG composites as well as cellulose extraction and utilization from CS and SCGs and its applications, oil extraction from SCGs, and cultivation with microorganisms using extracted oil for polyhydroxyalkanoates(PHA) production.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.