• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.7
• /
• pp.63-70
• /
• 2019

An electro-aerodynamic lens for improving the performance of virtual impactor has been proposed in this study. ANSYS FLUENT Release 16.1 was used for numerical analysis of virtual impactor with and without the electro-aerodynamic lens, used to collimate the incoming aerosol particles into a particle beam before injecting the particles into the virtual impactor. Particles supplied to the electro-aerodynamic lens were assumed to be highly charged. By using an aerodynamic lens before the virtual impactor, without any electrostatic effect, it was found that the cut-off diameter of the virtual impactor was reduced from $4.2{\mu}m$ to $0.68{\mu}m$ and that the fine particle contamination problem became more serious. However, by employing the combined electrostatic and aerodynamic effects, that is, by applying electric voltage potential to the electro-aerodynamic lens, the cut-off diameter was found to be further reduced to $0.45{\mu}m$ and the fine particle contamination was eliminated.

• Journal of Korea Water Resources Association
• /
• v.42 no.11
• /
• pp.911-920
• /
• 2009

Virtual water is defined as the volume of water required to produce a commodity or service. The degree of food self-sufficiency is currently about 27 % in South Korea, so that Korea is one of the largest net virtual water import countries for agricultural product, thus it is necessary to estimate suitable virtual water for South Korea. The objective of this paper is to quantify the agricultural virtual water use (AWU) and virtual water content (VWC) using the method suggested by Chapagain and Hoekstra during the period 1991-2007. To calculate the virtual water content, 44 different crop production quantity and harvested area data were collected for 17 years and FAO Penman-Monteith equation was adapted for computing crop consumptive use of water. As the results, AWU has been estimated at 15.1 billion $m^3$ in average showing a tendency to decrease. Rice has the largest share in the AWU, consuming about 10.1 billion $m^3$/yr which is about 75 % of gross AWU, and the VWC is 1600.1 $m^3$/ton for paddy rice. The largest VWCs of crops are oilseed and tuber crop, and the smallest are leaf and root vegetables. The primary crop production VWC can be used for calculating the VWC of various secondary products using the contribution ratio, therefore the results of this study are expected to be used as basic data for national agricultural water footprint.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.1
• /
• pp.92-100
• /
• 1994

For generating NC machining data automatically, it is important to handle computer models such as geometric shape data including engineering specifications for the mechanical part to be manufactured. We proposed unique CAM system for a personal computer that can define the geometric shape in an ease manner and machine the sculptured surfaces of a mold cavity. In this paper, the theoretical basis of generation of high precision machining data for a mold cavity is obtained. The first is geometric modelling, and the second is high precision machining with an optimized tool path algorithm satisfying given tolerance limits. Especially, the bicubic Bezier basis function is adopted for a geometric modelling.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.210-219
• /
• 2021

It was intended to conduct basic research to reduce development lead time and cost consumed in DTP process technology development. For the simulation of HTPE fabric, virtual engineering software was used to generate fiber model, yarn model, fabric model, and finite element model of HTPE fiber. The purpose of this study is to analyze the correlation and error rate between the stiffness numerical analysis results according to the direct DTP process parameters using reactive dyes in the generated finite element model and the stiffness measurements of the actual sample ac- cording to ASTM D1388. And, after dyeing the HTPE plain fabric according to the direct DTP process parameters, we want to analyze the dyeability of the HTPE fabric fabrics according to the direct DTP process parameters through the color fastness analysis. When looking at the results of the analysis of the finite element model, a higher value was shown when the distance between the nozzle and the fabric was 3mm than when the distance was 10mm. When the distance between the nozzle and the fabric was 10mm and 7mm, the reactive dye did not penetrate sufficiently, resulting in poor clarity when viewed with the naked eye.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.3
• /
• pp.75-80
• /
• 2002

In these days of severe struggle for existence, the world has changed a great deal to global and digital oriented period. The enterprises try to introduce new management and production system to adapt such a change. But, if the only new technologies are applied to an enterprise without definite analysis about manufacturing, failure fellows as a logical consequence. Hence, enterprise must analyze manufacturing system definitely and needs new methodologies to mitigate risk. This study suggests that the new approach, which is systems approach for process improvement, is organized to systems analysis, systems diagnosis, and systems verification. Systems analysis analyzes manufacturing systems with object-oriented methodology-UML(Unified Modeling language) from a point of product, process, and resource view. Systems diagnosis identifies the constraints to optimize the system through scientific management or TOC(Theory of constraints). Systems verification shows the solution with virtual manufacturing technique applied to the core problem which emerged from systems diagnosis. This research shows the artifacts to improve the productivity with the above methodology applied to forming shop. UML provides the definite tool for analysis and re-usability to adapt itself to environment easily. The logical tree of TOC represents logical tool to optimize the forming shop. Discrete event simulator-QUEST suggests the tool for making a decision to verify the optimized forming shop.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.5
• /
• pp.107-112
• /
• 2015

Increased productivity and cost reduction have emerged as the main goals of the industry due to the development of the machinery industry, and mechanical materials with excellent properties with the development of the machine tool industry are widely used in machine parts or structures. In addition, the cutting process of production plays a pivotal role in the production technology. Studies on cutting have involved a lot of research on the material, the cutting tool, the processing conditions, and numerical analysis. Due to the development of the computer through numerical analysis, cutting conditions, the assessment of cutting performance, and cutting quality could be predicted. This research uses the creation of the material model and AdvantEdge Production module for the NC code analysis. To improve the productivity, this research employs the optimization method to reduce cutting time.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.30 no.2
• /
• pp.71-90
• /
• 2021

The virtual patient dataset is a collection of diagnostic data from various sources acquired from a single patient into a coordinate system of three-dimensional visualization. Virtual patient dataset makes it possible to establish a treatment plan, simulate various treatment procedures, and create a treatment planning delivery device. Clinicians can design and simulate a patient's smile on the virtual patient dataset and select the optimal result from the diagnostic process. The selected treatment plan can be delivered identically to the patient using manufacturing techniques such as 3D printing, milling, and injection molding. The delivery of this treatment plan can be linked to the final prosthesis through mockup confirmation through provisional restoration fabrication and delivery in the patient's mouth. In this way, if the diagnostic data superimposition and processing accuracy during the manufacturing process are guaranteed, 3D digital smile design simulated in 3D visualization can be accurately delivered to the real patient. As a clinical application method of the virtual patient dataset, we suggest a decision-making method that can exclude occlusal adjustment treatment from the treatment plan through the digital occlusal pressure analysis. A comparative analysis of whole-body scans before and after temporomandibular joint treatment was suggested for adolescent idiopathic scoliosis patients with temporomandibular joint disease. Occlusal plane and smile aesthetic analysis based on the virtual patient dataset was presented when treating patients with complete dentures.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.402.2-402.2
• /
• 2014

과학과 기술이 발전할수록 나노크기를 넘어서 나노 크기미만의 관찰 분해능과 가공능력이 필수로 요구되어 측정장비와 가공장비의 연구 및 개발이 매우 중요하다. 현재는 주사전자현미경과 투과전자현미경의 발달로 나노크기 이하의 이미징 분해능에는 도달하였지만, 전자 입자의 가벼운 무게 때문에 가공측면에서는 한계를 가지고 있다. 또한 지난 수십 년간 정밀가공에 사용된 갈륨이온 LMIS(Liquid Metal Ion Source)기반의 집속이온빔 시스템은 수십 nm의 가공정밀도를 가지지만 10 nm 미만의 가공정밀도까지 구현하기에는 현재 기술적인 한계로 힘들다. 나노크기 이하의 이미징 분해능과 수 nm의 가공정밀도를 갖는 이온현미경이 최근에 상용화되어 판매되고 있는데, 이 이온 현미경에 사용되는 것이 가스장 이온원(GFIS:Gas Field Ionization Source)이다. 가스장 이온원은 작은 발산각, 작은 가상 이온원 크기 그리고 좁은 에너지 퍼짐의 특징을 가지며 이에 따라 구면수차 및 색수차에도 둔감한 특징을 가지고 있다. 또한 LMIS 는 갈륨이온이 시편속에 파고들어 시편의 물질 특성이 변화되는 문제가 있지만, GFIS에서는 주로 He, Ne 와 같은 불활성 기체를 주로 사용하므로 시편과 반응을 최소화 할 수 있는 장점도 있다. 위와 같은 특징을 갖는 이온빔을 GFIS 로 생성하고 이온현미경에 사용하기 위해서는 이온빔이 팁의 단원자 내지 수 개 정도의 원자에서 생성되도록 해야 한다. 본 연구에서는 GFIS 의 원리를 소개하고 장(전계)이온현미경(Field Ion Microscope)실험을 통하여 GFIS기반으로 생성된 이온빔의 형상을 보여준다. 또한 높은 각전류밀도 구현을 위하여 질소가스 에칭으로 텅스텐 팁 끝 단원자에서만 이온빔을 생성하고, 각전류 밀도 계산과 안정도 실험결과로 본 연구에서 개발한 이온원이 이온총으로서의 이온현미경 적용 가능성에 대해 보여준다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.365-366
• /
• 2009

본 논문에서 개발된 시뮬레이터는 광학 탑재체의 성능예측에 있어 지배적인 영향을 미치는 MTF인자 및 PSF인자들을 수치해석프로그램인 MATLAB 상에서 계산하였다. 또한 광학해석 프로그램인 ZEMAX를 연동하여 광학계의 가공, 제조 그리고 정렬할 때 발생할 수 있는 오차들을 적용 수 있다. 이를 통하여 광학탑재체의 운용상 발생하는 Jitter, Smear, Detector sampling, Detector diffusion등의 MTF를 쉽게 구할 수 있으며 여기에 광학계 제조상의 문제를 직접 적용할 수 있다. 그 결과 이를 영상에 넣어 가상영상을 생성하여 광학 탑재체 성능 예측을 효율적으로 수행할 수 있게 되었다.

• 기계와재료
• /
• v.23 no.1
• /
• pp.34-43
• /
• 2011

최근 노령화와 스포츠 인구의 증가로 인해 족부 혈액순환 장애 및 족관절의 퇴행성 질환이 증가하고 있으며 이로 인해 몸의 평형기능 및 운동성에 기능장애가 동반하게 된다. 이로 인해 일상생활 기능 저하와 낙상과 같은 이차적 합병증 발생을 초래하여 기능 및 삶의 질 저하, 활동제한 등으로 건강한 노년에 대한 심각한 위협 요인이 될 수 있다. 따라서 족부 혈액순환 증진을 위해 IT기술을 활용하여 압력에 따른 부위별 자극의 세기를 달리하고, 3D영상을 통해 가공의 상황 및 가상의 환경을 사람의 감각을 통해 느끼게 하여 실제 상호작용하고 있는 것처럼 만들어 주어, 혈액순환 개선의 효과를 극대화하고자 노화에 따른 족부건강 변화 및 족부 자극의 효과를 분석하고, 가상현실을 기반으로 한 족부혈액 순환 증진 장치와 관련 컨텐츠에 대해 제시하고자 한다.