• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.369-372
• /
• 2003

풍력발전 시스템은 계통에 전력을 공급하는 분산형 전원형태가 대부분이어서 어느 분산형 전원보다 계통 연계시 선로에 미치는 영향이 큰 발전설비이다. 특히 가변속 시스템인 경우 풍속이 낮은 영역에서도 운전이 가능하다는 장점이 있지만 저풍속 영역에서 풍속 변동시 터빈 회전자 출력의 리플이 직류단 전압을 변동하게 만든다. 기존의 직류단 전압 일정제어기를 사용하는 경우 인버터 출력전류는 정현파가 아닌 고조파 리플을 포함하는 문제가 발생한다. 본 논문에서는 이러한 문제점을 해결하고자 직류단 전압에 저역통과 필터를 사용하여 인버터 출력전류의 리플 개선을 하였다.

• 동력기계공학회지
• /
• 제10권3호
• /
• pp.81-87
• /
• 2006

This paper deals with an empirical model for decoupling control to control the refrigeration system effectively. The conventional control schemes of the system are mainly focused on representative two control methods, superheat control and capacity control. The capacity control is basically conducted to respond partial loading conditions on the purpose of energy saving. The superheat control is mainly carried out to maintain maximum coefficient of performance (COP). In the variable speed refrigeration system, the capacity and the superheat are controlled by inverters and electronic expansion valves respectively for saving energy and improving cost performance. The capacity and superheat can not be controlled independently because of interfering loop when the compressor speed and opening angle electronic expansion valve is varied. Therefore, we suggest decoupling model to eliminate the interfering loop at first. Next, each transfer function in decoupling control model is obtained from number of experiments.

• 설비공학논문집
• /
• 제13권4호
• /
• pp.233-241
• /
• 2001

In the present study, various experiments were performed to investigate the capacity modulation and transient response control using a variable speed compressor and electronic expansion valve(EEV). Based on the experimental results, the operation control algorithm and real time digital control system were constructed to adjust the superheat at the inlet of the compressor. Superheat control was fulfilled using both the PI feedback controller and PI controller combined with a feedforward concept. As a result, the tracking performance of the latter was better than that of former.

• 설비공학논문집
• /
• 제15권1호
• /
• pp.50-58
• /
• 2003

An analytical study was carried out to investigate the performance of an oil pumping system of a variable speed compressor using a commercial CFD program. The simulations for the oil supplying system with the oil and air mixture were performed by varying compressor speed from 40 Hz to 90 Hz. Comparing the predicted with the measured data on the modified scroll compressor validated the simulation model. The predicted results were consistent with the test data with a maximum deviation of 12.8%. The oil flow rate significantly increased with a rise of compressor speed due to a higher oil flow rate from the swing pump and a greater centrifugal force on oil gallery.

• 설비공학논문집
• /
• 제12권7호
• /
• pp.649-658
• /
• 2000

Thermodynamic modeling of low-pressure scroll compressor was developed by combining continuity and energy conservation equation. Suction gas heating was considered using energy balance inside the low pressure shell. Pressure, temperature and mass of refrigerant-22 as a function of orbiting angle were calculated by solving the governing equations using fourth order Rung-Kutta scheme. Motor efficiency was taken by experiments with a variation of frequency. The developed model was applied to the analysis of an inverter driven scroll compressor with a variation of frequency, pressure ratio and operating conditions. The model was verified with the experimental results at the same operating conditions. The developed model was adequate to predict performance of the inverter driven scroll compressor as a function of operating conditions. Calculated parameters from the model were discharge temperature, mass flow rate, power input, COP, and thermodynamic properties with respect to orbiting angle. To enhance the performance of a scroll compressor, it is essential to diminish leakage at low frequency level and improve the mechanical efficiency at high frequency level.

• 한국해양공학회지
• /
• 제11권4호
• /
• pp.197-204
• /
• 1997

최근 유도전동기를 이용한 가변속 구동시스템의 수요가 자동화 및 에너지의 효율적 이용 측면에서 육상 산업체는 물론, 선박 및 해양플랜트에도 확산되고 있다. 유도전동기의 토크 고속제어법은 가변속 구동시스템의 고성능화를 위한 필수과제로서, 제어법 적용시 2차저항의 동정문제가 대단히 중요하다. 본 논문에서는 유도전동기의 토크 고속 응답제어계에 있어서 고정도의 토크응답을 실현하기 위한 2차저항 동정법을 제안한다. 제안된 방법은 모터의 회로방정식으로부터 유도되며, 모터의 인가전압과 1차전류 정보로부터 간단히 구현된다. 제안된 방안의 타당성을 검증하기 위하여 펄스폭변조방식의 전압형 인버터를 상정한 수치 시뮬레이션을 수행하며 그 결과를 통하여 제안방식의 유용성을 입증한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.438-439
• /
• 2010

Compressor의 개발 동향은 높은 에너지 효율과 넓은 운전영역의 특성을 갖는 방향으로 성장해 왔다. 특히 기존의 AC Motor를 DC Motor로 대체함으로써 더 높은 효율을 얻을 수 있게 되었다. 본 논문은 압축기의 핵심 부품인 30hp급 용량에 92%의 효율과 3800RPM 가변속 운전이 가능한 BLDC Motor를 맥스웰을 이용하여 시뮬레이션하고 실제 제작을 통해 효율과 가변속 운전을 실험하였다.

• 설비공학논문집
• /
• 제13권8호
• /
• pp.746-756
• /
• 2001

An experimental study was conducted to investigated the effect of refrigerant flow control on the performance of a variable-speed heat pump operating in both cooling and heating mode. For this purpose, cooling and heating capacity, EER and refrigerant mass flow rate corresponding to an electronic valve as well as a capillary tube were measured as functions of compressor speed, length of capillary tube (or valve opening of the electronic valve), refrigerant charge, and outdoor temperature. From the comparison of experimental results, it was found that the performance variation due to the electronic valve opening became significant as the operating conditions(outdoor temperature and compressor speed) deviated from the standard condition at which heating capacity and EER were rated for the indicated capillary tube.

• 동력기계공학회지
• /
• 제14권5호
• /
• pp.30-35
• /
• 2010

Recently, the large capacity draft fans in power plants had been changed to variable speed type to educe the power consumption. But the fan experienced the unexpected vibration at specific speed regions. In this study, the high vibration frequency of the fan was confirmed and the natural frequency of the rotor were measured and analyzed by FEM programs. It was analyzed that the vibration was caused by the resonance at the frequency, 30.7Hz. So, the rotor vibration characteristic was changed by adjusting the distance between the shaft bearings. It was conformed the high vibration was disappeared over the all operation speeds.

• 한국조명전기설비학회지:조명전기설비
• /
• 제8권1호
• /
• pp.46-52
• /
• 1994

본 연구에서는 최근 많은 관심이 되고 이는 퍼지제어 알고리즘을 이용하여 유도 전동기 가변속 운전을 실현하였다. 퍼지 제어기는 전문가의 지식이나 경험에 기초로 하여 설계되기 때문에 안전한 제어 성능을 기대하기는 어렵다. 따라서, 견실한 퍼지 제어기 설계를 위하여 최적스케일 팩터 선정법을 제안하였다. 실험 결과, 퍼지 제어기의 제어 성능 및 외란 특성이 종래의 PI제어기에 비하여 우수함을 입증하였다.