• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.15-18
• /
• 2004

본 논문에서는 표면 부착형 영구자석형 동기 전동기(SPMSM)의 가감속과 부하 변동에 따른 속도 특성 향상을 위해 실제 속도와 부하 토크 관측기를 통한 부하 토크를 입력 변수로 설정하여 가변 이득 조절 알고리즘을 제안한다. 제안된 알고리즘을 증명하기 위해 여러 운전 조건에서 기존의 이득 시스템과 가변 이득 조절 시스템을 비교하여 제안된 알고리즘의 효용성을 검증하였다.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1991.10a
• /
• pp.225-227
• /
• 1991

• JOURNAL OF ELECTRICAL WORLD
• /
• no.1 s.61
• /
• pp.18-21
• /
• 1982

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.1
• /
• pp.46-52
• /
• 1994

In this paper, we implemented the variable speed controller of an induction motor by the Fuzzy control algorithms, which recently is invoking the remarkable interest. As the fuzzy controller is designed on the base of expert's knowlede and experience, it is difficult to expect the perfect control performance of fuzzy controller. Therefore, the adjustment techniques for optimization of scale factors were presented to design the robust fuzzy controller comparing with conventional PI control the usefullness of proposed fuzzy controller was showed by the experimental results.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.127-134
• /
• 2015

In this note, a continuous sliding surface transformed variable structure systems by the saturation function is presented for MIMO uncertain linear plants. A discontinuous sliding surface transformed VSS is proposed theoretically. The closed loop exponential stability together with the MIMO existence condition of the sliding mode on the predetermined sliding surface is investigated. For practical applications, a continuous approximation of the discontinuous VSS is made by means of the saturation function. The discontinuity of the control input as the inherent property of the VSS is much improved in view of the practical aspects. Through a design example and simulation studies, the usefulness of the proposed continuous transformed VSS controller is verified.

• New & Renewable Energy
• /
• v.7 no.2
• /
• pp.59-69
• /
• 2011

5MW wind turbine is regarded as a promising system for offshore wind farms in the western sea of Korean. And the wind turbine is developed in many companies but not much information is known about it. In this study, aerodynamics and control characteristics depending on several control methods is reviewed on 5MW wind turbine, in which configuration data of the turbine are used from the previous study of NREL. For the calculations, GH_Bladed, which is certificated software by GL, is used and compared with data from FAST code of NREL. This study shows that how much power production, and aerodynamic performances and loads can be obtained with different controls in the operation of 5MW wind turbine, which is expected to be useful in the design of the wind turbine system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.2
• /
• pp.202-208
• /
• 2001

A Switched Reluctance Motor(SRM) has double salient poles structure and the phase windings are wound in stator. SRM hase more simple structure that of other motor, thus manufacture cost is low, mechanically strong, reliable to a poor environment such as high temperature, and maintenance cost is low because of brushless. SRM needs position detector to get rotator position information for phase excitation and tachometer or encoder for constant speed operation. But, this paper doesn\`s use an encoder of high cost for velocity measurement of rotator. Instead of it, the algorithm for position detection and velocity estimation from simple slotted disk has been proposed and developed. To implement variable speed digital control system with velocity estimation algorithm, the TMS320F240-20MIPS fixed point arithmetic processor of TI corporation is used. The experimental results of the developing system are enable to control speed with wide range, not only single pulse, hard chopping mode and soft chopping, ut also variable speed control, and advance angle control.

• Journal of Aerospace System Engineering
• /
• v.12 no.1
• /
• pp.17-26
• /
• 2018

The interaction model between variable-speed control moment gyros and a satellite has been studied based on the multi-body dynamics. Using the interaction model, we could obtain data for the design of VCMG motors and the strength design of structure. The interaction effects of flexible modules such as solar panels were included. Flexible modes are excited by the satellite's maneuver, and these modes cause perturbations in the satellite attitude. We developed a simulation program by Modelica and verified the proposed model.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.224-226
• /
• 2003

권선형 유도 발전기는 고정자뿐만 아니라 회전자에도 전력을 공급할 수 있는 이중여자의 구조를 가지므로 제어의 폭이 넓은 장점을 가진다. 본 연구에서 구성하는 권선형 유도발전기 시스템은 계통 연계형으로 유도발전기의 고정자는 계통에 직접 연결되고, 회전자는 AC/DC/AC 컨버터를 통해 계통과 연결된다. 간 연구는 이러한 시스템에서 가변속의 동력아래 고정자측 유효전력과 무효전력을 회전자의 d-q 독립제어에 의하여 동시제어가 이루어지도록 하는 연구이다. 본 연구에서는 종래의 유도발전기 시스템에서 터빈의 속도가 동기속도 이상이 되어야만 일정한 전력을 얻을 수 있는 최대전력 점 트래킹 방식 보다 넓은 운전 범위인 동기속도 이하의 영역에서도 회전자 전력변환장치 용량이내에서 일정 전력제어가 가능하도록 하였다.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.4
• /
• pp.197-204
• /
• 1997

최근 유도전동기를 이용한 가변속 구동시스템의 수요가 자동화 및 에너지의 효율적 이용 측면에서 육상 산업체는 물론, 선박 및 해양플랜트에도 확산되고 있다. 유도전동기의 토크 고속제어법은 가변속 구동시스템의 고성능화를 위한 필수과제로서, 제어법 적용시 2차저항의 동정문제가 대단히 중요하다. 본 논문에서는 유도전동기의 토크 고속 응답제어계에 있어서 고정도의 토크응답을 실현하기 위한 2차저항 동정법을 제안한다. 제안된 방법은 모터의 회로방정식으로부터 유도되며, 모터의 인가전압과 1차전류 정보로부터 간단히 구현된다. 제안된 방안의 타당성을 검증하기 위하여 펄스폭변조방식의 전압형 인버터를 상정한 수치 시뮬레이션을 수행하며 그 결과를 통하여 제안방식의 유용성을 입증한다.