• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.1-6
• /
• 2017

Stents are widely used as the most common method of treating coronary artery disease with implants in the form of a metal mesh. The blood flow is normalized by inserting a stent into the narrowed or clogged areas of the human body. In this study, the mechanical characteristics of a stent are investigated according to the variations of its design parameters by the Taguchi method and finite element analysis. A stent model of the Palmaz-Schatz type was used for the analysis. In the analysis, an elasto-plastic material model was adopted for the stent and a hyper-elastic model was used for the balloon. The main interest of this study is to investigate the effects of the design parameters which reduce the possibility of restenosis by adjusting the recoil amount. A Taguchi orthogonal array was constructed on the model of the stent. The thickness and length and angle of the slot were selected as the design parameters. The amounts of radial recoil and longitudinal recoil were calculated by finite element analysis. The statistical analysis using the Taguchi method showed that optimizing the shape of the stent could reduce the possibility of restenosis. The optimized shape showed improvements of recoil in the radial and longitudinal directions of ~1% and ~0.1%, respectively, compared to the default model.

• Journal of the Society of Disaster Information
• /
• v.19 no.2
• /
• pp.280-291
• /
• 2023

Purpose: As fire accidents happen at the production and storage sites of superabsorbent polymers for convenience of daily life, an experimental study was conducted to secure basic data to establish practical preventive measures against them. Method: The sample container (20cm width × 20cm length) was made into a rectangular cuboid with the heights of 3cm, 5cm, 7cm, and 14cm, respectively, to allow access to the infinite flat plane. The front and back of the container were covered with a 300-mesh stainless steel mesh for one-dimensional heat transfer. The sample container was placed in the center of the thermostatic bath, which was heated to a predetermined temperature by setting the thermostat program in advance, and it was determined to be 'ignited' when the central temperature of the sample rose by more than 20℃ above the set temperature, and "unignited" when it was maintained at an approximate value of the set temperature. Result: The critical autoignition temperature was calculated to be 217.5℃ when the height of the sample container was 3 cm, 212.5℃ when it was 5 cm, 202.5℃ when it was 7cm, and 187.5℃ when it was 14cm. The ignition induction time to reach the maximum temperature was 34hours for 3cm, 76hours for 5cm, 143hours for 7cm, and 318hours for 14cm. Conclusion: ① As the size of the container increased, the autoignition temperature decreased and the induction time to reach the maximum temperature increased. ② An apparent activation energy was calculated to be 44.92kcal/mol, with a correlation of 96.93%.

• Journal of the Economic Geographical Society of Korea
• /
• v.8 no.1
• /
• pp.153-169
• /
• 2005

In this study, we analysed the state of the fisheries in Chungnam around 1910 from Hangook Susanji. As a result, there were about 30 ports in the west coast area in Chungnam, and we can classify their locations into 5 types Type I is located in small and mid sized rivers. Type II is located in a costal port. Type III is ports facing the open sea, and type IV is ports in a bay. Type V is ports on islands of coast. Species of fish are porges, mackerels, sting rays, croakers, hairtails, shrimps, etc. The base of fishing porge was Jukdo and Yeondo. The fishing banks of croakers are formed from Chilsantan, Jeonlado to the area of seashore, Chungnam. Hairtails were caught near all the areas of seashore. Salt manufacturing is done near all coasts of Chungnam, Seocheon-bay, Ungcheon-bay, Ocheon-bay, Anmyeon island, Taean, Dangjin area, etc represent this work. Especially, the salt which was produced in Taeangun was so famous that it was called ' Taeansalt'. In the Kum-river area there were 32 fishing villages. Freshwater fish were caught in the upper stream area and the mouth of Geumgang, down stream, was the center for producing Baengeo. There were 23 fishing villages, and the species consisted of croaker, hairtail, Forge, gray mullet, sting ray, sharks, anchovy, shrimps, etc in Biin-bay. The coast of Boryeong had about 33 fishing villages, but their fishing industry was not developed more than their good salt manufacturing. Though there are records that Chunsu-bay had 28 fishing villages, Taean peninsula and Garolim-bay had about 70 fishing villages, and Asan-bay area had about 55 fishing villages, they were developed a little, but not more than Weir fisheries or salt manufacture on the base of salt area and the tideland because these areas were just for farming. South of Anmyeon island of West coast island areas is the biggest area of Stow nets on stakes fishing and the island areas down mouth of Kum river were centers for producing porge.