• The Magazine for Energy Service Companies
• /
• s.1
• /
• pp.22-25
• /
• 1999

지난달 9일에는 교내에서 ESCO 2차사업 추진을 위한 기공식을 가졌다. 2차사업이 완료되면 그동안 냉난방 설비시설 가동을 위한 34명의 기기가동요원이 12명 수준으로 줄어들고 열악한 근무환경도 벗어나게 된다. 또 노후된 전기 및 설비시설 개선을 위해 연평균 4내지 5억여원이 고정투자되던 시설보수비가 절감되어 다른 노후시설 개선에 집중투자할 수 있는 여건이 마련된다.

• Journal of the Korean Society of Radiology
• /
• v.7 no.3
• /
• pp.205-211
• /
• 2013

This study is for patients who are diagnosed with Frozen Shoulder, Korean traditional osteopath (KTO) was applied. The reduction of pain in patients with significant pain relief who studied how to increase the range of motion of the shoulder joint in order to additionally confirm. Consists of a total of 14 subjects, divided into two groups of seven experimental groups and seven control groups was studied. KTO seven patients was performed a total of 10 times seven patients was not performed. Look at each item, if the range of motion of the shoulder joint, The group looked at the changes in the operation value when applying the KTO Flexion (7.33), Extension (10.00), Abduction (8.76), Adduction (9.05), external rotation (8.10), internal rotation (10.00) was changed. The group looked at the changes in the operation value when did not apply the KTO Flexion (7.33), Extension (10.00), Abduction (8.76), Adduction (9.05), external rotation (8.10), internal rotation (10.00) was changed. That you can bring an increase in range of motion of the shoulder Frozen Shoulder Korean traditional osteopathic treatment to patients.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.101-101
• /
• 2011

현재 국내에서 시행되고 있는 '4대강 살리기 사업'은 하천에서 발생하는 홍수 및 가뭄재해방지를 위한 다양한 공학적 노력을 시도하고 있다. 특히 안정적인 수위 및 유량확보와 홍수방지를 위한 보(weir)가 4대강 유역에 16개 설치되고 있다. 이러한 보 구간에는 고정보와 가동보가 복합적으로 설치되고 있으며 가동보는 그 형상과 운영방식에 따라 다양한 설계방안이 적용되었다. '4대강 살리기 사업' 중 낙동강 23공구의 강정보 공사 구간에는 원호형태의 측면 형상을 갖는 라이징 섹터게이트(Rising sector gate)가 적용되었다. 라이징 섹터게이트는 구조물의 높이가 낮고 수문의 개폐장치가 수문피어 구조물 내에 설치되어 경관이 우수하며, 구조가 간단하여 비체와 수류의 안정성이 뛰어나기 때문에 4개의 공사구간에 적용되었다. 따라서 본 연구에서는 강정보의 가동보 구간 2문 중 1문을 1/100 축척으로 제작하여 가변경사 개수로에 설치하고, 홍수 빈도별 상류 유량 조건과 하류단 수위조건으로 케이스를 정하여 실험을 수행하였다. 본 실험에서 사용한 개수로 장치는 너비 0.6 m, 높이 0.8 m, 그리고 길이 15.0 m(측정가능 구간, 헤드탱크와 테일게이트 부제외)의 개수로 실험장치이다. 측부는 모두 강화유리로 되어 육안관찰 및 계측 시 용이하게 제작되었으며, 순환식 유량 공급장치를 구축하여 수로의 하부에 설치된 유량탱크로부터 계속적으로 순환하도록 설계되었다. 또한 수로 하단으로부터 상단방향으로 약 33 m 지점에 전동 유압식 Jack screw 2기가 설치되어 경사도를 조절할 수 있도록 제작되었다. 유량조절용 판넬의 제어기판에는 디지털 경사계가 설치되어 있기 때문에 보다 정확한 경사도의 조절이 가능하다. 보 모형의 총연장은 53 cm이며 폭은 45 cm이다. 섹터게이트의 게이트부분은 직경 15 cm로 설계하였다. 문주부분을 포함한 모든 모형은 아크릴로 제작하며 레이저의 주사를 방해하지 않으며 투과율을 최대로 할 수 있도록 고강도의 아크릴을 가장 얇게 하여 중공형태를 채택하였다. 실험조건은 우선 보의 운영방안에 따라 게이트의 4가지 개방도를 설정하였고, 특히 평수위조건에서는 보의 상류부에 퇴적된 퇴적물의 세척을 위한 flushing 운영개방도 포함되어 있다. 홍수시에 대한 유량조건은 2년 빈도에 해당하는 유량을 수문의 비율과 상사법칙에 따라 설정하였으며 하류단 수위조건도 동일한 조건에 대한 값을 채택하여 적용하였다. 유동장의 해석을 위해서는 비접촉식 계측방법인 PIV(Particle Image Velocimetry) 시스템을 채택하여 2차원(x-z 방향) laser sheet를 생성하고 주입된 particle에서 반사된 변위(displacement) 정보를 상호상관(cross-correlation)기법으로 유동장을 계산하였다. 또한 수리모형과 동일한 지형격자를 구축하여 3차원 CFD 프로그램인 FLOW-3D로 계산하여 결과를 비교하였다. 특히 flushing 운영방안에 대한 게이트부의 개방도를 세가지(30, 45, $60^{\circ}$)로 구분하여 모의하였고, 적절한 개방도를 제안하고자 하였다. 실험결과는 우선 4가지 운영방안에 대한 가동보 주변에서의 유속장을 파악하였고, 최대유속의 발생위치의 변화를 확인할 수 있었다. 그리고 이에 따른 보의 바닥에서 최대유속이 발생할 경우, 하상보호공 위치와 거리 등에 대해서 분석하였다. 이를 통해 가동보 운영에 따른 다양한 유속구조를 파악할 수 있게 되며 구조적 안정성 확보를 위한 검증자료로 활용될 수 있을 것으로 예상된다. 향후, 가동보 운영방안 중 수세효과(flushing effect)에 대한 효과분석을 위해 게이트부 상류구간에 적절한 입경과 비중의 퇴적물질을 설치하는 연구와 상류부에서의 유입유사농도 및 시간변화에 따른 퇴적에 관한 연구를 수행할 계획이다.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.2
• /
• pp.206-213
• /
• 2020

The purpose of the study was to compare the differences among phases accoring to the gait time on the heel height during gait, investigate the effect on ROM of the lower limb on gait time. Ten female college students in their 20s participated in the study, and variables were calculated through 3D gait analysis on height of heel. As a statistical method, one-way ANOVA was performed for the differences between the three heel heights, and multiple regression analysis was performed to determine the effect of gait time on the ROM. As a result of the study, phase 2, the higher the heel, the longer the gait time, but phase 3, the higher the heel, the shorter the gait time. As a result of analyzing the effect of gait time on the ROM of the lower limb, in phase 2, the greater the ROM for the ankle and knee joint in 1 cm, and for the ankle joint in 5 cm, the longer the gait time. In phase 3, the greater the ROM for the hip joint in 1 cm, the longer the gait time, and the smaller the ROM for the ankle joint in 10 cm, the longer the gait time. Therefore, in the case of high-heeled shoes, it is suggested that the control of the ankle joint is important.

• Journal of Korea Water Resources Association
• /
• v.53 no.2
• /
• pp.89-96
• /
• 2020

Water management agencies under the Ministry of Environment produce and accumulate qualified basic data for major rivers. However, the integrated management of the river water has been weak since the artificial water circulation process, such as the intaking and drainage of agricultural water, has not been examined in the basin, which includes many agricultural land. In this study, a study was conducted on how the power usage method (operating time method) based on the running time can be applied and improved among indirect flow rate measurement methods used to investigate flow rates collected by the riverside for agricultural water purposes, and thus the resultant data of high reliability can be obtained at low cost. The operation time method is suitable for small-scale water pumping stations where it is difficult to secure real-time power supply data. The reliability of the data was verified through the correlation analysis with the actual flow rate, and it was found that the flow rate calculated by the operation time method reflecting the level of the stream to which the inlet of the pumping station is connected can be reasonably matched with the actual flow rate. In addition, it was confirmed that the investment cost at the time of initial installation of the facility was highly efficient by generating qualified flow data at low cost through comparison with direct flow rate measurement methods. If flow data is secured by applying the operation time method to large and small water farms located along the riverside, it is expected that more quantitative and integrated stream water management will be possible.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.11
• /
• pp.1043-1049
• /
• 2007

Data transfer rate and storage capacity are main criteria of the performance of the optical disk drive. The highest data transfer rate and the largest storage capacity is most desirable. To increase these performances, the actuator of the optical disk drive should have a high servo bandwidth to compensate the vibration of an optical disk. The servo bandwidth is limited by some flexible modes of the actuator, thus it is essential to increase the natural frequencies of the flexible modes. In this paper, we suggested a moving magnet type actuator having high frequencies of the flexible modes. Generally, the moving magnet type actuator has an advantage to increase the natural frequencies of the flexible modes because the moving magnet type actuator has simple structure and the Young's modulus of magnet is high. However, large moving mass and inefficiency of EM(electromagnetic) circuit cut down driving sensitivities of the actuator. To improve driving sensitivities, we designed the model with the closed electromagnetic circuit for tracking direction. In addition, driving sensitivities and the natural frequencies of the flexible modes were improved by using DOE(design of experiments) for electromagnetic circuit and modifying the lens holder.

• Journal of Korea Water Resources Association
• /
• v.50 no.2
• /
• pp.111-119
• /
• 2017

The underflow type movable weirs were arranged in a multi-stage way along a reach at the Chiseong River, where flooding has been observed frequently. With management water level of the movable weirs the control effects of storage and flood were suggested and the control effects were compared with those of existed weir system. The water level for the targeted storage and flood elevation was suggested by building the artificial neural network model. When the underflow type of movable weirs were arranged in a multi-stage way, the peak flood elevation decreased by 68.28% in the downstream compared with the existed weir system, and the total storage of the target section of multi-stage movable weirs increased by 216%. As a result of numerical simulation to build the artificial neural network model, 60%, 20%, and 20% among 216 data were used for the training, validation, and test, respectively. The training result of mean square error was $0.1681m^2$ and the high coefficients of determination were 0.9961, 0.9967, and 0.9943 in the training, validation, and test, respectively. As a result the water level management of each movable weir for the controls of flood elevation in the targeted downstream and targeted storage was suggested by using the artificial neural network.

• Journal of the Korea Convergence Society
• /
• v.12 no.4
• /
• pp.303-310
• /
• 2021

This study was conducted to identify the effects of pressure taping between tibia and fibula of High Ankle Sprain athletes on pain, Range of Motion(ROM), and strength and to provide basic data for rehabilitation programs. The subjects of the study were conducted with a total of 10 athletes except for four who gave up who were diagnosed with high ankle sprain, or who were diagnosed with ankle sprain but their physical examinations proved positive. The results showed no significant differences in pain(Visual Analog Scale, VAS). The ROM was significantly increased in inversion(IV) and eversion(EV) in both groups. The Isometric strength was significantly improved in IV(0°, 7°, 14°) and EV(0°) in Taping Group(TG). When taping was applied to athletes with injury to the High Ankle Sprain, ROM and muscle strength improved at the same pain level.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.2
• /
• pp.32-41
• /
• 1999

The design method that the structure of double actuators of read-only or read-writable DVD optical pick-up of high density can be compact into the structure of one actuator, is proposed. The designed actuator has the structure of the shaft sliding type in which the moving part can be rotated about the shaft accord to a used optical disc and an objective lens can be switched, and is suspended with magnetic spring. In this actuator, Coulomb's friction is used as damping force and the moving part is designed by finite element method so that the second natural vibration mode can not occur within the servo band. The mock-up of the actuator designed in this paper is made, and its dynamic characteristics is measured and estimated.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2001

The aim of this study is to know the GPS absolute positioning accuracy after discontinuing of Selective Availability (SA). The GPS satellite clock errors and the observation station coordinates were calculated using GPS C/A code pseudorange and compared with the JPL precise ephemerides and the previous known coordinates. As the results, the correction or the GPS clock errors in SA-on is about $\pm$40m but in SA-off $\pm$2m. The 95% probable errors for the measurements in SA-on are about $\pm$65m but in SA-off $\pm$10m in X, Y and SA-off $\pm$15m in Z.