• 기계와재료
• /
• v.23 no.3
• /
• pp.96-113
• /
• 2011

녹색기술 및 친환경 공정의 필요성이 급증함에 따라 재료이용률 향상을 지향하는 차세대 압출공정의 대두가 필요하게 됨에 따라 유압 CNC(Servo) 제어를 이용한 가변단면 압출기술을 개발하게 되었다. 이러한 가변단면 압출(Varied section extrusion, VSE)기술은 공정 중에 압출구를 빠져 나가는 소재의 단면 형상을 변화시켜 재료이용률을 향상을 도모하였으며, 후가공 공정의 생략도 가능하여 국내 압출업체의 생산원가 절감 및 글로벌 기술경쟁력 확보에 큰 도움을 줄 수 있을 것이다. 아직은 소수의 선진국에서 시도한바 있으나 양산품 적용에는 생산원가 및 생산속도, 상품성 등에 문제가 있어 자동차 부품 적용에 한계를 보이고 있는 기술이다. 따라서 본 연구팀이 가변단면 압출용 금형을 포함한 최적의 압출공정 및 양산성 문제의 해결점을 거의 확보하고 있는 단계로 세계를 선도하는 리딩기술(Leading technology)을 보유하게 됨으로써 국가의 기술경쟁력 향상에 중요한 역할을 수행할 수 있을 것이다. 본 연구의 내용을 요약하여 정리해 보면 첫째로는 CNC 제어 가변단면 압출공정에 대하여 자세하게 소개하고 특징 및 장 단점을 설명하였으며, 자동차 부품군에로의 적용에 많은 이점들을 갖고 있음을 설명하였다. 두 번째로는 가변단면 압출을 위한 이동 금형(Moving die)부품을 갖는 구조의 압출금형에 관하여 기존의 압출금형과 비교하여 설명하였으며, 가변단면 압출용 금형의 구조 및 메커니즘의 최적화를 이루고자 하였다. 세 번째로는 가변단면 압출공정을 실현하기 위한 CNC 제어 압출시스템에 대하여 간략히 설명하였다. 네 번째로는 자동차 부품 적용을 위한 정밀 압출공정으로서 가변단면 압출공정에 대하여 유한요소해석을 통하여 가변단면 압출공정 변수 및 금형 변수 등에 대한 엄격한 검토를 선행적으로 수행하여 양산성 확보를 위한 정보들을 분석 정리하였다. 끝으로는 세 가지 단면형태를 갖는 가변단면 압출제 시제품에 대하여 CNC 제어 가변 단면 압출공정의 상용화 가능성을 확인 적용성 검토를 완료하였다. CNC 제어 가변단면 압출기술은 압출공정에 있어서 많은 경험과 기술적 검토가 선행되어져야 하는 고부가가치 성형공정으로써 재료 이용률을 획기적으로 향상시킬 수 있는 압출공법으로 향후 자동차 부품 뿐만아니라 다양한 알루미늄 제품군에 적용이 가능하다고 판단된다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.1
• /
• pp.65-72
• /
• 2014

Turbine rotor-pyrostarter coupled test was performed for the verification of thermo-structural suitability of a turbopump turbine. Newly developed solid propellant and design concept were used in pyrostarter development. In case of turbine rotor, rotor configuration modification and post EDM machining process are adopted in rotor manufacturing respectively for the thermal stress relief and the surface integrity improvement on the blade surfaces. In the test, combustion gas of pyrostarter was directly ejected from the nozzles and impinged on the stationary turbine rotor specimen through the identically shaped flow passage of turbopump. Three kind of thermal load - design to extreme condition - test were performed and no damages were found on the turbine rotor specimens.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.727-732
• /
• 2012

Baroplastic poly(butyl acrylate) (PBA)/polystyrene (PS) blends were prepared by mixing PBA and PS emulsions synthesized by cationic and anionic surfactant, respectively. Interestingly, the heterocoagulation of nanoparticles have found to be affected strongly by emulsion concentration but the blends have been prepared with almost same compositions regardless of the amount of reactants. Utilizing this method, PBA/PS/Si hybrid nano-blends were prepared successfully via electrostatic attraction forces between PBA, PS and silica nanoparticles. The hybrid nano-blend having 2 or 5 wt% of silica was then processed to a semi-transparent film at $25^{\circ}C$ under 13.8 MPa for 10 min, which showed 3.0 MPa of tensile strength and 25 MPa of elastic modulus. Therefore, the heterocoagulation technique can be used for preparing baroplastics with uniform compositions of polymer and silica nanoparticles.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.12
• /
• pp.1267-1271
• /
• 2012

Demand for optical glass device used for lighting could increase rapidly because of LED lighting market growth. The optical glass devices that have been formed by hot press molding process the desired optical performance without being subjected to mechanical processing such as curve generation or grinding. EL-Max material has been used for many engineering applications because of their high wear resistance, high compressive strength, corrosion resistant and very good dimensional stability. EL-Max is very useful for a glass lens mold especially at high temperature and pressure. The performance and reliability of optical components are strongly influenced by the surface damage of EL-Max during grinding process. Therefore, the severe process condition optimization shall be necessary for the highly qualified EL-Max glass lens mold. To get the required qualified surface of EL-Max, the selection of type of the diamond wheel is also important. In this paper, we report best grinding conditions of ultra-precision grinding machining. The grinding machining results of the form accuracy and surface roughness have been analyzed by using Form Talysurf and NanoScan.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.1
• /
• pp.238-246
• /
• 1998

Surface residual stresses as well as wall thickness and ovality changes after U-bending process on UNS N06690 row-1 heat exchanger tubes, were estimated. Surface residual stresses were measured by Hole Drilling Method(HDM), calculating the stresses from relieved strains of 3 rosette strain gages. After bending of the tubes, dimensional tolerances for wall thickness and ovality were satisfied with ASTM requirements. Residual stresses at the extrados were introduced with compressive stress(-) by bending operations, and its maximum value reached-319 MPa in axial direction at ${\phi}=0^{\circ}$ in position. Tensile residual stresses(+) of ${\sigma}_zz=45$ MPa,${\sigma}_zz=25$ MPa were introduced in the intrados surface at position of ${\phi}=0^{\circ}$ Maximum tensile residual stress of 170 MPa was detected on the flank side at position of ,${\phi}=95^{\circ}$i.e., at apex region. It appeared that higher stress gradients were generated at the irregular transition regions. In the trend of residual stress changes with U-bend position, the extrados is related with the changes of ovality and the intrados is related with the changes of wall thickness.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.4
• /
• pp.47-56
• /
• 2015

In this paper, the Thermal behavior and reliability characteristics of carbon CCL (Copper Claded Layer), which can be used as the core of HDI (High Density Interconnection) PCB (Printed Circuit Board) are evaluated through experiments and numerical analysis using CAE (Computer Aided Engineering) software. For the characterization of the carbon CCL, it is compared with the conventional FR-4 core and Heavy Cu core. From research results, the deformation amount of the flexure strength of PCB is the highest with pitch grade carbon and thermal behavior of PCB is lowest as temperature increases. In addition, TC (Thermal Cycling), LLTS (Liquid-to-Liquid Thermal Shock) and Humidity tests have been applied in the PCB with carbon core and the reliability of PCB with carbon core is confirmed through reliability tests. Also, possibility of uneven surface of the via hole and wear of the drill bit due to the carbon fibers are analyzed. surface of the via hole is uniform, the surface of the drill bit is smooth. Therefore, it is proved that the carbon CCL has the drilling workability of the same level as conventional core material.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.1
• /
• pp.56-61
• /
• 2015

To improve the accuracy of a machine, research needs to be conducted on the relationship between the output variables and design variables of a spindle-shaped part from the thermal and static viewpoints. Therefore, research was carried out by examining the correlation of each variable to find the optimum conditions. Moreover, DOE (design of experiments) was extensively used. The model used in this study was a grinding spindle to which a hydrostatic bearing was applied. This model was used in a preliminary analysis based on the experimental results of the previous studies. The influences of the output variables and design variables were compared through a main effect analysis. Generated response surfaces were applied to the Kriging model. To optimize the model, a screening method was selected. In comparison with the initial model, the deformation of the optimized model designed by DOE decreased by 4.1 μm, while the thermal deformation decreased by 1.2 μm. Therefore, it was efficient to design a spindle-shaped part through DOE to improve the accuracy of the machine.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.107-119
• /
• 1991

This dissertation analyzes the running mechanism of flexible and thin tape above rotating head through the experiment. The scope of study is confined to measure the vertical deformation of running tape under hydrodynamic pressure invoking phenomena of elasto-hydrodynamic lubrication between the protruded bump on a rotating cylinder ad the running tape. Experimental system is devised to measure the vertical deflection of the running tape by opto-electronical displacement gauge, which enables to detect microscopic surface deflection of high frequency. Thorough the tests of small specimens of groove and bump, the accuracy and reliability of this experimental method is confirmed and achieved an accuracy within 5%(2.mu.m) error for the microscopic deflection with high frequency. In experimental works, the effects of bump size on flying characteristics of the tape were evaluated and examined. For the vertical deformation of the running tape. the numerical results and its trend agree qualitatively with the experimental ones.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.122-128
• /
• 2010

On the international provision on prohibition of ocean dumping of waste, tap water sludge has been buried or recycled on th low value added product as landfill. Due to the tap water sludge having high inorganic content, differing from the sewage sludge, it is possible to use as a usable resource by suitable process. We have studied on hydro thermal processing of tap water sludge with phosphoric acid and finally synthesize a artificial zeolite having a deodorization property. To use it as a building material, it has to be solidification. This study is on the properties of artificial zeolite synthsized and solidification properties by various types of solidifier. It is showed that the slaked lime is the best on setting property and its optimum content is 30-60 weight proportion. Solid by solidified by slaked lime has low strength and excellent deodorization performance, so it is possible to use as a functional pannel as gypsum board.

• Journal of the korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.18-23
• /
• 1982

최근 자동차의 고속경향화 추세는 많은 진전을 보고 있으며 또 앞으로도 많은 연구와 노력이 경주되어야 하리라고 본다. 그 가운데 하나로 스프링의 경량화는 대략 다음과 같은 3방향에서 연구되고 있다. 1) 복합재료, 즉 GFRP(carbon fiber reinforced plastics), 나아가서는 BFRP(born fiber reinforced plastics)의 탄선과 경량성을 이용한 스프링. 2) 형상, 즉 구조적인 면에서 스프링소재를 후판으로 사용함으로서, 다매물에서 단매 또는 소수 매의 거물곡선 스피링(parabolic taper spring)으로의 변진. 3) 고응력 사용, 즉 종래의 스프링량보다 높은 탄성을 가진 재료로써 스프링 응력을 톺게 사용할 수 있는 강종의 개발 등이다. 특히 3)의 탄성한을 \ulcorner이는 문제는 2)의 후재화와 더불어 열처리성, 가공성 등이 문제가 되어 이에 따라 신강종으로서의 변천을 강요하게 된다. 그러므로 국제경쟁력을 강화하기 위하여 각국 들이 활발하게 연구 및 개발을 추진하고 있는 현상이다. 우리나라의 경우 현재 제작기술은 어느 정동 많이 축적되고 있으나, 아직 R&D면에서는 점진적으로 추진되고 있다. 이와 같은 실정에서 자동차산업의 국제화와 더불어 종래 사용된 스프링강재의 재검토가 우리나라에서도 긴급히 필 요하게 되었따. 그 예로서 KS SPS5(JIS SUP9)의 강종이 종래 일본에서 자동차용스프링의 대 종을 이루고 있던것이 최근에는 SUP9A로 전환되고 있다. 이것은 SUP9A는 SUP9보다 기계적 성질이 우수하며, 또한 자동차분야의 세계제일위인 미국의 SAE5160재와 일지되고 있다. 그러므로 국제화 경향과 더불어 SUP9종은 SUP9A로 전환되고 있으므로서 우리 나라의 경우에도 자동차 스프링의 수출용은물론이고, 국내용에도 SUP9A에 해당하는 규격이 제정되고, 또한 빠른 전환이 필요하다고 본다. 이와 같은 국제적인 추세는 SUP6을 SUP7H종으로 더욱 향상된 것이 실용 화되고 있다. 아래에서 이에 대한 기계적 특성을 중심으로 검토키로 한다.