• Journal of Food Hygiene and Safety
• /
• v.27 no.1
• /
• pp.68-73
• /
• 2012

In this study, a method was developed using molecular biological technique to distinguish an authenticity of meats for processed meat products. The genes for distinction of species about meats targeted at 12S or 16S genes in mitochondrial DNA and the species-specific primers were designed by that PCR products' size was around 200bp for applying to processed products. The target materials were 10 species of livestock products and it checked whether expected PCR products were created or not by electrophoresis after PCR using species-specific primers. The results of PCR for beef, pork, goat meat, mutton, venison, and horse meat were 131, 138, 168, 144, 191, and 142 bp each. The expected PCR products were confirmed at 281, 186, 174, and 238 bp for chicken, duck, turkeymeat, and ostrich. Also, non-specific PCR products were not detected in similar species by species-specific primers. The method using primers developed in this study confirm to be applicable for composite seasoning including beefs and processed meat products including pork and chicken. Therefore, this method may apply to distinguish an authenticity of meats for various processed products.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.6
• /
• pp.915-923
• /
• 2005

We monitored paralytic shellfish poison (PSP) by HPLC method in shellfishes including a sea squirt, and its products produced in domestic and imported, total 35 species, 850 samples, collected at 9 cities such as Seoul, Busan, Daegu, Ulsan, Pohang, Masan, Tongyeong, Geoje and Sacheon, 10 times by month (2 times in April and May) from March to October, 2004. PSPs were detected in a few raw samples on March, and it showed highest toxic ratio $(72.9\%)$ on third week of April (51 samples toxic in total 70 samples) and decreased suddenly to $2.4\%$ on third week of May. After then, PSPs were detected in a few samples, sporadically, and disappeared after August. Most raw shellfishes in the market were safe from PSP, showing the toxicity below 1 MU/g (quarantine level 4.0 MU/g), except oyster collected on April at Masan (1.9 MU/g), blue mussel on April (1.8 MU/g) and purplish washington clam on May at Sacheon (2.1 MU/g). However, it was strongly suggested to survey and under control for the imported scallops and ark shells which showed highly toxic in the quarantine level on May, July, even September. PSP were not detectable in the all shellfish products collected on May, July and September, except 2 boiled and dried mussels contained trace amount (0.01 MU/g), and all those products were safe as below quarantine toxin level (4.0 MU/g).

• Korean Journal of Food Science and Technology
• /
• v.42 no.6
• /
• pp.762-767
• /
• 2010

This study evaluated daily intakes of BHT, BHA, and TBHQ in Korean. The daily intakes were estimated using both a dietary survey approach and food supply survey approach. In the dietary survey approach, individual dietary intake data from the Korea National Health and Nutrition Survey in 2005, as well as analytical results of BHT in 131 samples, BHA in 134 samples, and TBHQ in 104 samples, were used to assess daily intakes of the antioxidants. In the food supply survey approach, both total production amounts of BHT, BHA and TBHQ and maximum permitted levels of the antioxidants were used to calculate daily intakes. In the dietary survey results, the average daily intakes of BHT, BHA and TBHQ were 0.8, 0.5, and 0.3 ${\mu}g$/kg body weight/day, respectively, and below 0.2% of the ADI (acceptable daily intake) set by JECFA (Joint FAO/WHO Expert committee on Food Additives). In the food supply survey approach, the average daily intakes of BHT, BHA,and TBHQ were all 0.3 mg/kg body weight/day. The ratios of ADI were 97, 60, and 40%, respectively. According to these results, daily intakes of BHT, BHA, and TBHQ in Korean are lower than the ADI.

• Journal of Food Hygiene and Safety
• /
• v.36 no.4
• /
• pp.316-323
• /
• 2021

A total of 106 samples (nuts, nut products, oilseeds, oilseed products, seed for beverage products) were simultaneously analyzed with LC/MS/MS method. The tested mycotoxins were aflatoxin (B₁, B₂, G₁, G₂), ochratoxin A, fumonisin (B₁, B₂), and zearalenone. Mycotoxins were detected in 37 of 106 samples (35%), and two or more mycotoxins were simultaneously detected in 9 of 106 samples (8.5%). Aflatoxin, ochratoxin A, fumonisin and zearalenone were detected at the range of 0.08-1.45 ㎍/kg, 17.29 ㎍/kg, 1.16-14.89 ㎍/kg and 0.12-12.69 ㎍/kg, respectively. The results revealed that the most frequently detected mycotoxin was zearalenone (23%), followed by aflatoxin (13%), fumonisin (8%) and ochratoxin A (1%). Detection rates of nuts and oilseeds were 35% and 33%, respectively, and detection rates of their processed foods were 44% and 46%, respectively. The detection rate of mycotoxins was 10% higher in processed foods than in nuts and oilseeds. Mycotoxins are physicochemically stable and can persist during food processing and cooking, making management of mycotoxins in raw materials a concern of high importance.

• Bulletin of Food Technology
• /
• v.11 no.4
• /
• pp.8-33
• /
• 1998

조미식품과 관련된 용어로서는 양념, 조미료, 등이 있고 영어로는 Seasonings, Flavorings, Condiments, Spice등이 있다. 사전적인 의미에서 약간의 차이가 있을지 몰라도 조미식품이란 직접 음용하는 일은 드물고 주로 다른 식품의 풍미를 증진시키는데 이용되는 모든 식품을 말하며 일반사전에는 없는 일종의 '합성어'이다. 따라서 한마디로 정의하기 어렵고 다른 식품과의 구분도 애매한 편이다. 우리나라 표준산업 분류에는 조미식품 제조업이란 분류는 없다. 한편, 식품공전에서는 조미식품을 "식 등의 풍미를 돋우기 위한 목적으로 사용되는 장류, 시초, 소스류, 토마토 케첩, 카레, 고춘가로 및 실고추 향신료가공품, 드레싱, 복합조미식품, 향미유 등의 제품을 말한다"고 정의되어 있다. 이 중 장류에는 간장, 된장, 고추장, 춘장, 청국장 등이 포함되며, 소스류에는 우스타소스 등 서양풍 소스는 물론이고 불고기양념등과 같은 우리의 전통양념류를 포함한다. 우리나라 경우 드레싱보다는 마요네즈가 먼저 소개되어 현재 생산량이나 소비량에서 압도적으로 우위에 있기 때문에 마요네즈가 널리 알려져 있으나, 마요네즈는 샐러드드레싱, 프렌치드레싱 등과 마찬가지로 드레싱의 일종으로 보는게 타당하다. "소스"라는 말도 넓은 의미에서는 조미식품 의 대부분을 포함하며, 좁은 의미로는 현재 식품공전에서 말하는 제품류들이다. 이처럼 조미식품이라 하면 시초, 토마토 케첩 및 소스류, 마요네즈 및 드레싱류, 카레 및 천연향신료 등을 포함하는 좁은 의미를 뜻하는 경우가 많다. 본문은 이중에서 천연향신료를 중심으로 그 원료소재에 따른 기능별 효과를 다루고자 한다.

• 축산식품과학과 산업
• /
• v.7 no.1
• /
• pp.42-51
• /
• 2018

• 축산식품과학과 산업
• /
• v.6 no.2
• /
• pp.41-47
• /
• 2017

• Journal of the KSME
• /
• v.29 no.2
• /
• pp.162-168
• /
• 1989

철이나 동은 BC5000~3000년부터 도구류, 장식품 등으로 인류의 역사에 등장하고 있는데 반해 알루미늄 재료는 공업용 재료로써의 기초가 확립된 후 아직 100년이 채 못되고 있지만 건종 성 질이 우수하기 때문에 이러한 특성을 이용해서 항공기용 재료, 전선, 기물, 일반프레스 가공품, 제메이스류, 일반 기계부품, 콘덴서용 및 포장용 상자, 도료 및 잉크 원료 화포 재료, 환원재용 분말, 차량, 건축용 재료 등에 사용되고 있고 이용도는 제 2차대전후에 건축, 차량, 조선, 채광, 교량, 화학, 섬유식품 공예 등과 같은 공업분야에 널리 새로운 용도로 개척이 되어 응용이 되고 있다. 이와 같이 그 용도 분야가 다양화되고 적으로도 철, 다음가는 금속재료로 성장하고 있기 때문에 "알루미늄 재료 기술"이라는 이름으로 각종 자료들을 정리 하다보니 너무나도 그 범위가 광범위하여 본 글에서 제외된 알루미늄 재료의 성분, 선정, 지침, 물리. 화학. 기계성질, 형상과 그의 제작범위, 구조설계, 절삭가공, 접합, 표면처리, 단조 등에 대한 여러 가지 자료는 지면관 계로 별도로 정리를 해서 다음 기회에 소개하고자 한다. 소개하고자 한다.

• Food Science and Preservation
• /
• v.4 no.3
• /
• pp.337-341
• /
• 1997

Texture is an important quality factor of processed chestnut products, which changes depending on the conditions of boiling process. The conventional boiling process consists of three stage(1st : 70 minutes at 60$^{\circ}C$; 2nd : 20minutes at 70$^{\circ}C$; 3rd : 80minutes at 98$^{\circ}C$). To improve the conventional boiling process of processed chestnut products, we investigated the changes of texture at different stages of boiling process and undertook the optimization of boiling process by response surface method on heating times of 2nd and 3rd heating, and amount of softening agent. The initial hardness and cohesiveness, the most important textural characteristics of chestnut, were 7.876kg and 0.189, respectively. In the third boiling stage, hardness decreased to 0.313kg and cohesiveness increased to 0.310. Using response surface method the minimum point of hardness and maximum point of cohesiveness was examined and model equations for predicting the changes of hardness and cohesiveness in the optional boiling condition were developed.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.275-278
• /
• 2009

프레스 금형의 가공 및 제작 공정의 자동화란 불필요한 반복 작업을 피하여 시간을 절약하고 표준 품질의 가공물을 얻고자 하는 것이다. 자동화의 범위는 3차원 금형설계, 머시닝 센터, 와이어 컷 방전 가공, 도면작업까지를 포함하는 것이다. 자동화 공정이 구축이 완료되면 동일한 품질의 가공품을 얻을 수 있고 가공정보는 3D 카탈로그 및 다이 셋을 기준으로 작업을 한다. 1개의 부품을 금형설계자동화 모듈을 이용하여 3차원으로 금형설계를 완료하고 난후에 동일한 환경에서 프레스 금형의 가공 및 제작을 할 때 이의 공정자동화에 관하여 연구한 것이다.