• Journal of Welding and Joining
• /
• v.15 no.4
• /
• pp.99-108
• /
• 1997

Analytical model for the temperature distribution and the cooling rate of weld in dual beam laser welding is presented for investigating the possibility of controling the cooling rate. The model is based on the solutions to the problem of heat flow due to the distributed and line heat sources for preheating and welding respectively in plates with finite thickness. The effects of beam power, beam distribution parameter, interbeam distance, and welding speed on the resulting temperature distribution and cooling rate are presented. The cooling rates of dual beam laser weld at the weld centerline under the investigated conditions are reduced to as one third of those of welds which were produced by single beam laser. And it appeared that the cooling rate of dual beam laser weld is strongly dependent on the process parameters of preheating laser beam power and welding speed.

• Journal of ILASS-Korea
• /
• v.10 no.1
• /
• pp.1-9
• /
• 2005

When the water jets heated up to the saturation temperature at a high line pressure are sprayed into a reduced (atmospheric) pressure through an air-assisted nozzle, the jets experience sudden exposure into a reduced pressure, get superheated and produce steam bubbles while atomization processes of jets are taking place. This process is called flash atomization. In this study the flash atomization of superheated water jets assisted by air has been studied. Sprays with flash atomization have been photographed at various water and air flow rates and water superheats. It has been found that the spray angle with flash atomization increases with water superheat and water flow rate but decreases with air flow rate. The degree of change of spray angle has been analyzed and correlated as a function of superheat, air and water flow rates.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.401-402
• /
• 2003

TiO$_2$는 광촉매로서 자외선이 조사되면 여기상태로 되어 광활성을 나타내므로, 휘발성 유기화합물(VOCs), 악취, 중금속 물질 등을 제어하는데 널리 사용되고 있다(Lee and Biswas, 1998). TiO$_2$는 기상 및 액상 등 여러 가지 방법으로 제조되고 있는데(Morooka et al., 1989), 본 연구에서는 기상 방법의 하나인 전기가열 튜브로를 이용하여 TiOs 입자를 제조하였다. 즉, TTIP(titanium isopropoxide, Ti[OCH($CH_3$)$_2$]$_4$)와 공기를 전기가열 튜브로의 d열원을 이용하여 반응시키는 방법을 사용하였다. TiO2의 광활성에 영향을 미치는 변수로는 전기로의 온도, TTIP의 초기 농도, carrier gas의 유량, 산화시키기 위한 산소의 양, 수분의 양 등이 있다. (중략)

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.2
• /
• pp.81-93
• /
• 2005

The main purpose of this paper Is to develop the Management Resource Analysis System for KOTRA which is based on Activity Based Costing(ABC). Because the products and services of KOTRA are exclusive and include a government subsidy, we need develop a different system from the private firm's ABC system. The Management Resource Analysis System that we propose is embodied using JAVA and JSP within an UNIX environment and developed as a Web-enabling base. It is expected for aiding a manager's decision-making such as resource inquiry, standard resource analysis, estimating the ratio of a government subsidy, case based reasoning, what-if analysis. The results of this paper suggest what points are to be considered when we apply ABC for Government Investment Corporation.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.4
• /
• pp.286-293
• /
• 2004

Recently, hot processing using the heat source like laser machining and RFS was developed and spreaded gradually. In order to generate tool-path for the proper hot tool, a new tool-path linking algorithm is needed because tool-path linking algorithm for machining can't be applied. In this paper, zigzag tool-path liking algorithm was proposed to generate tool-path automatically for RFS. The algorithm is composed of three steps: 1) Generating valid tool-path element, 2) Storing tool-path elements and creating sub-groups, 3) linking sub-groups. Using the proposed algorithm, CAD/CAM software for the tool-path generation of hot tool was developed. The proposed algorithm was applied and verified for Venus's face and die of cellular phone case.

• Journal of Hydrogen and New Energy
• /
• v.31 no.4
• /
• pp.363-371
• /
• 2020

Recently, the technologies to utilize the cold energy of liquefied natural gas (LNG) have attracted significant attention. In this paper, thermodynamic performance analysis of combined cycles consisting of ammonia Rankine cycle (AWR) and organic Rankine cycle (ORC) with LNG Rankine cycle to recover low-grade heat source and the cold energy of LNG. The mathematical models are developed and the effects of the important system parameters such as turbine inlet pressure, ammonia mass fraction, working fluid on the system performance are systematically investigated. The results show that the thermal efficiency of AWR-LNG cycle is higher but the total power production of ORC-LNG cycle is higher.

• Korean Journal of Biological Psychiatry
• /
• v.24 no.3
• /
• pp.162-166
• /
• 2017

Drug rash with eosinophilia and systemic symptoms (DRESS) syndrome is a potentially life-threatening, medication-induced hypersensitivity reaction with long latency. It is characterized by fever, rash, leukocytosis with eosinophilia, atypical lymphocytosis, and internal organ involvement. The most common causes of DRESS syndrome are sulfonamides and anticonvulsants such as carbamazepine and lamotrigine. However, valproic acid and olanzapine could develop DRESS syndrome. We report a case of DRESS syndrome associated with valproic acid and olanzapine in a 41 years old male patient with bipolar disorder.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.6
• /
• pp.42-48
• /
• 1998

This paper is concerned with the heat flux distribution and energy partition for creep-feed grinding. From measurements of transient grinding temperatures in the workpiece sub-surface using an embedded thermocouple, the overall energy partition to the workpiece was estimated from moving heat source theory for a triangular heat flux distribution as 3.0% for down grinding and 4.5% for up grinding. The higher energy partition for up grinding can be attribute to the need to satisfy thermal compatibility at the grinding zone. The influence of cooling outside the grinding zone can be analytically taken into account by specifying convective heat transfer coefficients on the workpiece surface ha ahead of the heat source (grinding zone) and hb behind the heat source. The smaller energy partition together with slightly lower grinding power favors down grinding over up grinding.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.10b
• /
• pp.176-180
• /
• 1996

본 연구에서는 감손우라늄 폐기물칩의 처리 장치인 공기조절식 산화장치의 열전달 특성을 실험적으로 해석하였다. 감손우라늄칩의 산화처리시 발생되는 산화열에 의한 장치 내부의 온도상승 및 외부로의 열전달을 해석하기 위해 산화장치 내부에 히터를 설치하여 실험을 수행하였으며, 히터의 발생열량을 시간에 따른 열전달 특성을 알아보기 위하여 Nusselt수, Grahsof수와 Rayleigh수를 구하고, Nusselt수와 Rayleigh수의 관계를 구하였다.

• Korean System Dynamics Review
• /
• v.15 no.2
• /
• pp.97-131
• /
• 2014

The purpose of this study is to analyze Foreign Exchange(FX) exposure and FX hedge strategy based on the systems thinking perspective using causal loop diagrams. FX exposure has been a critical issue on a business management. Many studies in Korea have researches on variables which make effects to the company value. This study displays causal loop diagrams(CLDs) on these issues. In order to make CLD more objective, most causalities are articulated from recent 72 studies (1998~2013) of domestic top journals. This approach is valuable in that it is the first try to draw all the causalities from various literature review regarding FX exposure and FX hedge strategy. This study is expected to make a useful and basic material to research the financial issues of corporate, as the first research to dynamically understand FX exposure and FX hedge strategy.