• Analytical Science and Technology
• /
• v.29 no.1
• /
• pp.19-28
• /
• 2016

The objective of this study was to determine the acidification of precipitation in the Jeju area. Precipitation samples were collected from the Jeju area from 2009-2014, and the major ionic species were analyzed. In the regression analysis, through a comparison of ion balance, electric conductivity, and acid fraction, the correlation coefficients showed a good linear relationship within the range of 0.927~0.983. The volume-weighted means of the pH and electric conductivity were 4.9 and 22.7 µS/cm, respectively. The ionic strength of precipitation was 0.27±0.38 mM, indicating about 35.9 % of total precipitation within the pure precipitation criteria. The volume-weighted mean concentrations (ìeq/L) of the ionic species in the precipitation were in the order of Na⁺ > Cl⁻ > nss-SO₄²⁻ > NO₃⁻ > NH₄⁺ > Mg²⁺ > H⁺ > nss-Ca²⁺ > PO₄³⁻ > K⁺ > HCOO⁻ > CH₃COO⁻ > NO₂⁻ > F⁻ > HCO₃⁻ > CH₃SO₃⁻ . The acidification contributions by sulfuric and nitric acids were 54.5 % and 36.5 %, respectively. Meanwhile the acidification contributions by formic and acetic acids were 4.8 % and 4.2 %, respectively. Thus, it was found that the acidification of the precipitation in the Jeju area was mainly due to the inorganic acids. The neutralization factors by NH₃ and CaCO₃ were also 33 % and 20 %, respectively.

• Korean Journal of Agricultural Science
• /
• v.12 no.2
• /
• pp.292-308
• /
• 1985

This study was performed to obtain the basic data which can be applied to the use of foamed mortars using foaming agent of prefoamed type. The data was based on the properties of foamed mortars depending upon various mixing ratios of cement to fine aggregates, flow values and foam-cement ratio to compare those of cement mortar. The results obtained were summarized as follow; 1. At the mixing ratio of 1:0 and the foam-cement ratio of 6.00%, the increasing rate of water-cement ratio was 25% by flow $200{\pm}5mm$, 28% by flow $240{\pm}5mm$ and 32% by flow $280{\pm}5mm$. But it decreased as the mixing ratio gets poorer. The result showed that water amount increased because of the high viscosity caused by the increase of foam-cement ratio. The decrease of water-cement ratio was the greatest when the foam-cement ratio was 1.50%. 2. Absolute aridity bulk density of foamed mortars decreased with the increase of foam-cement ratio and the decrease of flow values. 3. Generally, compressive, tensile and bending strenghs of foamed mortars decreased with the decrease of flow values and the increase of foam-cement ratio. 4. The compressive strength was in proportion to tensile strength. It was estimated that the compressive strength was 8.8 times of tensile strength. The compressive strength was in proportion to bending strength. It was estimated that the compressive strength was 4.0 times of bending strength. The bending strength was in proportion to tensile strength. It was estimated that the bending strength was 2.1 times of tensile strength. 5. At the mixing ratio of 1:1 the lowest absorption rates were showed by foamed mortars, respectively. It was significantly higher at the early stage of immersed water.

• Resources Recycling
• /
• v.28 no.6
• /
• pp.79-86
• /
• 2019

Recently, the use of lithium ion battery(LIB) has increased. As a result, the price of lithium and the amount spent lithium on ion battery has increased. For this reason, research on recycling lithium in waste LIBs has been conducted1). In this study, the effect of roasting for the selective lithium leaching from the spent LIBs is studied. Chemical transformation is required for selective lithium leaching in NCM LiNi_xCo_yMn_zO₂) of the spent LIBs. The carbon in the waste EV cell powder reacts with the oxygen of the oxide at high temperature. After roasting at 550 ~ 850 ℃ in the Air/N₂ atmosphere, the chemical transformation is analysed by XRD. The heat treated powders are leached at a ratio of 1:10 in D.I water for ICP analysis. As a result of XRD analysis, Li₂CO₃ peak is observed at 700 ℃. After the heat treatment at 850 ℃, a peak of Li₂O was confirmed because Li₂CO₃ is decomposed into Li₂O and CO₂ over 723 ℃. The produced Li₂O reacted with Al at high temperature to form LiAlO₂, which does not leach in D.I water, leading to a decrease in lithium leaching ratio. As a result of lithium leaching in water after heat treatment, lithium leaching ratio was the highest after heat treatment at 700 ℃. After the solid-liquid separation, over 45 % of lithium leaching was confirmed by ICP analysis. After evaporation of the leached solution, peak of Li₂CO₃ was detected by XRD.

• Culinary science and hospitality research
• /
• v.21 no.3
• /
• pp.68-79
• /
• 2015

The purpose of this study is to provide preliminary information relating to the applicability of Chinese soybean as functional food material. This study compared the manufacturing characteristics, phenolic compounds contents, and antioxidative activities of soymilk prepared with Korean(Jinpumkong) and Chinese Heinong 48) soybean. Antioxidative activities were measured by in vitro models such as 1,1-diphenyl-2-crylhydrazyl DPPH) radical scavenging activity, and 2,2'-azino-bis(3-ethylbenzothiazoline-6-ulfonic acid ABTS) radical scavenging activity. The physicochemical properties(solid contents, pH, and color) and suspension stability of soymilk were not significantly different between the types of raw soybean. Total phenolic and flavonoid contents of soymilk prepared with Chinese cultivar($20.71{\pm}0.34GAE\;mg/g\;dw$ and $6.31{\pm}0.11QE\;mg/g\;dw$, respectively) were significantly higher than those of soymilk prepared with Korean cultivar $^{***}p<.001$ and $^{**}p<0.01$, respectively). Total tannin content of soymilk prepared with Korean cultivar($2.29{\pm}.22TAE\;mg/g\;dw$) was significantly higher than that of soymilk prepared with Chinese cultivar($^{***}p<0.01$). The electron donating ability(EDA) of soymilk was significantly increased in a dose dependent manner(p<0.05); the soymilk prepared with Chinese cultivar showed significantly higher EDA on the concentration of 2.5 mg/mL(p<0.01) and 10.0 mg/mL(p<0.05) than that of soymilk prepared with Korean cultivar. The antioxidative activities of soymilk were significantly increased in a dose dependent manner on ABTS radical scavenging(p<0.05), and there was no significant difference between the types of raw soybean. These results suggest that Chinese soybean, which contains plenty of phenolic compounds and has superior antioxidant activity, may have great potential as a raw material for functional beverage preparation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.2
• /
• pp.89-96
• /
• 1975

The experiment was carried out to investigate the chemical properties of cement kiln dusts, abundantly produced from cement industry as a byproduct, and their effectiveness on rice yield. The field experiment was conducted on the acid paddy soil developed on basalt at Dongsong-Myon, Chulwon-Kun, Gangwon-Do. Two kinds of cement kiln dusts were used ; By Pass (BP) collected from the suspension preheater and Electric Precipitate (EP) from the cottrell electric precipitator. The levels of cement kiln dust applied were 100kg/10a, 200kg/10a and 300kg/10a, and the recommended variety "Nong Back" was adopted for this experiment. The results obtained are summarized as follows ; 1. The component of cement kiln dusts seems to be quite suitable for liming material. BP has 55% alkalinity, 41.7% of soluble calcium, 9.8% of soluble magnesium and 4.5% of water soluble silicate, while EP has 53.5% alkalinity, 41.7% soluble calcium, 8.3% soluble magnesium and 1% water soluble silicate. 2. The relative effectiveness of cement kiln dust in the soil will be superior due to very fine particle size. EP pass through completely 270 mesh screen, and 95% of BP pass through 150 mesh screen, 68% passing 270 mesh. 3. BP application at the rate of 100kg/10a increased 21% of rice yield as compared with control and EP 15%. It was observed that the affected yield components were increased panicle number per hill, grain number per panicle and 1,000 grains weight. 4. The application of optimum amount (100kg/10a) of cement kiln dusts accelerated the uptake of nutrients by rice plant and increased rice yield. However, the excess amounts (200kg/10a, 300kg/10a) of cement kiln dusts retarded the uptake of nutrients from soil.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.16 no.2
• /
• pp.93-101
• /
• 2016

Purpose: McArdle disease, glycogen storage disease type V (GSD V), is one of the most common adolescent-onset glycogen storage diseases. It is caused by recessive mutations in PYGM encoding myophosphorylase, which is critical to glycogen metabolism. Since only a few korean patients have been reported, we will observe the clinical and genetic features of three korean patients with McArdle disease. Methods: We retrospectively reviewed the medical records of three patients with genetically confirmed McArdle disease, including the results of forearm ischemic exercise test, electromyogram, nerve conduction velocity, muscle biopsy, and PYGM analysis in peripheral leukocytes. Results: All three cases were males and their age of symptom onset was 12, 5, 14 years old, respectively. A high basal level of serum creatine kinase was noted in all three patients. They experienced the recurrent episodes of rhabdomyolysis, but second wind phenomenon was not definite. In muscle biopsy, subsarcolemmal space vacuoles including periodic acid schiff stained materials were found in two patients, while no evidence of glycogen storage disease was found in the other. A total of five different mutations, $p.Arg50^*$, p.Trp798Arg, $p.Arg50^*$, p.Glu779del, $p.Asp511Thrfs^*28$ and p.Phe710del, were found in three patients. Avoidance of isometric exercise, aerobic exercise and glucose intake before each exercise were recommended for all patients. Conclusion: The three Korean patients with McArdle disease showed the typical manifestations of the condition. The most mutations were private. Therefore, identification of more cases with long-term follow-up will be required to understand the clinical and genetic features of this disease among Korean population.

• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.166-172
• /
• 2018

This study set out to conduct a field survey with smart greenhouse-based farms in seven types to figure out the actual state of smart greenhouses distributed across the nation before selecting a system to implement an optimal greenhouse environment and doing a research on higher productivity based on data related to crop growth, development, and environment. The findings show that the farms were close to an intelligent or advanced smart farm, given the main purposes of leading cases across the smart farm types found in the field. As for the age of farmers, those who were in their forties and sixties accounted for the biggest percentage, but those who were in their fifties or younger ran 21 farms that accounted for approximately 70.0%. The biggest number of farmers had a cultivation career of ten years or less. As for the greenhouse type, the 1-2W type accounted for 50.0%, and the multispan type accounted for 80.0% at 24 farms. As for crops they cultivated, only three farms cultivated flowers with the remaining farms growing only fruit vegetables, of which the tomato and paprika accounted for approximately 63.6%. As for control systems, approximately 77.4% (24 farms) used a domestic control system. As for the control method of a control system, three farms regulated temperature and humidity only with a control panel with the remaining farms adopting a digital control method to combine a panel with a computer. There were total nine environmental factors to measure and control including temperature. While all the surveyed farms measured temperature, the number of farms installing a ventilation or air flow fan or measuring the concentration of carbon dioxide was relatively small. As for a heating system, 46.7% of the farms used an electric boiler. In addition, hot water boilers, heat pumps, and lamp oil boilers were used. As for investment into a control system, there was a difference in the investment scale among the farms from 10 million won to 100 million won. As for difficulties with greenhouse management, the farmers complained about difficulties with using a smart phone and digital control system due to their old age and the utter absence of education and materials about smart greenhouse management. Those difficulties were followed by high fees paid to a consultant and system malfunction in the order.

• Korean Journal of Agricultural Science
• /
• v.33 no.1
• /
• pp.35-41
• /
• 2006

This study was conducted to investigate the developmental ability of interspecies cloned embryos after nuclear transfer of goat fetal fibroblast cells into porcien oocytes. Recipient porcine and goat oocytes were obtained from slaughterhouse and matured in vitro according to established protocols. Enucleation was accomplished by aspirating the first polar body and cytoplasm and a single donor cell was individually microinjected into vitelline space of the enucleated oocyte. The reconstructed oocytes were electrically fused with 0.3M mannitol fusion medium. After electro-fusion, interspecies reconstituted embryos were cultured in PZM-3 for 7 days. In porcine interspecies nuclear transfer with goat fetal fibroblast cells, the cleavage rate of reconstituted embryos were 58.9% which was no significant different from that in porcine nuclear transfer embryos (67.4%). However, the developmental rate into blastocyst stage was 5.4% in interspecies nuclear transfer which was significantly lower than that in porcine intraspecies nuclear transfer (13.6%). When the developmental ability of porcine interspecies nuclear transfer with goat cells was compared with goat intraspecies nuclear transfer, the cleavage rate of embryos were 59.2% and the developmental rate into morular and blastocyst stage was 13.6% in interspecies nuclear transfer which were significantly lower than those in intraspecies nuclear transfer embryos. This result indicated that porcine interspecies nuclear transfer with goat fetal fibroblast cells showed the developmental potential in vitro with lower cleavage and developmental rate compared with intraspecies nuclear transfer.

• Journal of Science Education
• /
• v.33 no.2
• /
• pp.336-345
• /
• 2009

The purpose of this study is to analysis ERF components patterns of causal questions generated during the observation of biological phenomenon. First, the system that shows pictures causing causal questions based on biological phenomenon (evoked picture system) was developed in a way of cognitive psychology. The ERF patterns of causal questions based on time-series brain processing was observed using MEG. The evoked picture system was developed by R&D method consisting of scientific education experts and researchers. Tasks were classified into animal (A), microbe (M), and plant (P) tasks according to biological species and into interaction (I), all (A), and part (P) based on the interaction between different species. According to the collaboration with MEG team in the hospital of Seoul National University, the paradigm of MEG task was developed. MEG data about the generation of scientific questions in 5 female graduate student were collected. For examining the unique characteristic of causal question, MEG ERF components were analyzed. As a result, total 100 pictures were produced by evoked picture and 4 ERF components, M1(100~130ms), M2(220~280ms), M3(320~390ms), M4(460~520ms). The present study could guide personalized teaching-learning method through the application and development of scientific question learning program.

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.870-877
• /
• 1998

With impedance spectrum measurements, impedance was studied in the interface between sample solutions for $K^+-ion$ selective PVC membrane electrode containing neutral carriers [dibenzo-18-crown-6 (D18Cr6) and valinomycine (Val)]. Response characteristics of electrode were examined by measuring AC impedance spectra that were resulted from the chemical structure and the content of carrier, variation of plasticizer, membrane thickness, doping of base electrolytes, and concentration variation of sample solution. Transport characteristics of PVC membrane electrode were also studied. It was found that the equivalent circuit for the membrane in $K^+$ solution could be expressed by a series combination of solution resistance and a parallel circuit consisting of the bulk resistance and geometric capacitance of the membrane system. But the charge transfer resistance and Warburg resistance were overlapped a little in the low concentration and low frequency ranges. The carrier, D18Cr6 was best for electrode and impedance characteristics, and ideal electrode characteristics were appeared especially in case of doping of the base electrolyte[potassium tetraphenylborate(TPB)]. The optimum carrier content was about 3.23 wt% in case of D18Cr6 and Val. DBP was best as a plasticizer. As membrane thickness decreased the impedance characteristics was improved, but electrode characteristics were lowered for membrane thickness below the optimum. In the case of D18Cr6, the selectivity coefficients by the mixed solution method for the $K^+$ ion were the order of $NH_4{^+}>Ca^{2+}>Mg^{2+}>Na^+$.