• Journal of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.188-194
• /
• 1986

The rate constants for the solvolysis reactions of p-chlorobenzyl chloride in ethanol-water mixtures were determinded at 30${\circ}\;and\;40{\circ}$C up to 1,600bar. Rates of reaction were increased with increasing temperature and pressure, and decreased with increasing solvent composition of ethanol mole fraction. The plots of ln k against pressure are fitted to a second-order function in P, and values of ${\Delta}V^{\neq}\;and\;${\Delta}{\beta}^{\neq}$ are obtained. The values of ${\Delta}V^{\neq}\;and\;${\Delta}{\beta}^{\neq}$ extremum behavior at about 0.20 mole fraction of ethanol. This behavior is discussed in terms of solvent structure variation. From the relation between the plots of ln k versus the solvent parameter, q ≡ (D-1)/(2D+1), or the logarithmic molar water concentration, In $C_w$, it could be estimated that the reaction proceeds through $S_N1(2)$ mechanism.

• KSBB Journal
• /
• v.13 no.1
• /
• pp.77-82
• /
• 1998

Glutathione(L-$\gamma$ -glutamyl-L-cysteinylglycine, GSH) produced by microbial enzymes was separated by a liquid chromatography. In order to select a resin which would bind GSH efficiently, a batch adsorption experiment was carried out with GSH solution and various resins at pH 8.0 GSH bound to Q-sepharose and QAE-sephadex among anion exchange resins, but the latter was found not to be suitable because of the reduction of resin volume at high salt concentration. Preliminary experiments using a standard solution were carried out to separate GSH. GSH and $\gamma$ -glutamylcysteine were separated from the other constituents by applying step gradient of salt(NaCl) concentration. GSH was successfully separated from $\gamma$ -glutamylcysteine by applying Tris buffer containing 35mM NaCl. Chromatographic separation behaviors for the enzymatic product was similar to that for the standard solution. Separation yields of GSH from the standard solution and enzymatic product solution were 72.6% and 84.4%, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.1
• /
• pp.17-23
• /
• 2005

In order to examine effects of sampling frequency during rainfall-runoff process from paddy field on the estimation of pollution load, EMCs of several water sampling frequencies were examined. Water quality samples were conducted by every two hours interval for each event. It was found that difference of load estimation between five times sampling and two hours consecutive sampling during rainfall-runoff showed $15.2{\sim}-15.2%$ for T-N, $20.0{\sim}-26.2%$ for T-P, $28.6{\sim}-35.7%$ for the SS, respectively. In the same way, the effects of number of sampling data on estimation of pollution load using runoff-mass load(L-Q) method were investigated. L-Q equation made of five times sampling data provided 10% differences in estimation of mass loads of T-N, T-P, and SS when compared to those by L-Q equation using entire two hours consecutive sampling data during runoff process.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.2
• /
• pp.184-190
• /
• 1992

The combustion characteristics, ignition delay, p-t, dp/dt, Q-t of diesel oil and fish oil blended diesel oils was investigated according to pressure and temperature in a constant volume combustion bomb. The results are as follows: 1) The influence of temperature and pressure on the ignition delay was almost constant in high temperature, regardless of the blending rates, and the ignition delay was shortest in the 60% blend. 2) The maximum pressure was high in order of with pure diesel oil, with the 20% blend and the 60% blend. 3) The rate of pressure rise was high in order of with pure diesel oil, with the 20% blend and the 60% blend. The rate of maximum pressure rise was significantly higher with pure diesel oil than with two blends. 4) The amount of accumulative heat release was large in order of with pure diesel oil, with the 20% blend and the 60% blend.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1751-1759
• /
• 2018

This paper presents parallel-connected inverters to achieve accurate proportional power sharing. Due to line impedance mismatch, reactive power cannot be distributed proportionally when using the conventional $P-{\omega}$ and $\mathcal{Q}-E$ droop. In order to realize reactive proportional power sharing, the ratio of the droop coefficients should be inversely proportional to their power-sharing ratios. Meanwhile, the ratio of the line impedance should be inversely proportional to the desired power-sharing ratio, which is very difficult to be met in practice. In order to deal with this issue, a practical control strategy is presented. By measuring the PCC voltage and using the virtual impedance, the output impedance of individual inverters is reconstructed to counteract the line impedance effect. In order to guarantee system stability, a low pass filter is designed to suppress the bandwidth of the line compensation. Finally, the simulation and experimental results are given to verify the effectiveness of the proposed control strategy.

• Bulletin of the Korean Mathematical Society
• /
• v.57 no.4
• /
• pp.1061-1073
• /
• 2020

In this paper, the expressions of meromorphic solutions of the following nonlinear complex differential equation of the form $$f^n+Qd(z,f)=\sum\limits_{i=1}^{3}pi(z)e^{{\alpha}_i(z)}$$ are studied by using Nevanlinna theory, where n ≥ 5 is an integer, Q_d(z, f) is a differential polynomial in f of degree d ≤ n - 4 with rational functions as its coefficients, p₁(z), p₂(z), p₃(z) are non-vanishing rational functions, and α₁(z), α₂(z), α₃(z) are nonconstant polynomials such that α'₁(z), α'₂(z), α'₃(z) are distinct each other. Moreover, examples are given to illustrate the accuracy of the condition.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.12
• /
• pp.1118-1122
• /
• 2006

In this study, in order to develop the low temperature sintering multilayer piezoelectric actuator, PMN-PNN-PZT system ceramics were manufactured and their microstructure, ferroelectric and piezoelectric properties were investigated. By increasing sintering temperature, remanent polarization$(P_r)$ was increased due to the increase of sinterability and grain size. However, coercive $field(E_c)$ showed an opposite tendency to remanent polarization owing to the feasibility of domain wall motion. At the sintering temperature of $900^{\circ}C$, dielectric $constant({\varepsilon}_r)$, electromechanical coupling $factor(k_p)$, piezoelectric $constant(d_{33})$ and mechanical quality $factor(Q_m)$ showed the optimal value of 1095, 0.60, 363 and 1055, respectively, for multilayer piezoelectric actuator application.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.43 no.6
• /
• pp.163-173
• /
• 2001

This study describes the characteristics of concentrations of pollutants such as total nitrogen(T-N), total phosphorous(T-P), and chemical oxygen demand(COD) at paddy areas during 2-year irrigation periods. The most common order in average concentrations of T-P and COD is podded water > irrigation(or drainage) water > percolated water. Most of pollutants concentrations in drainage water are lower than those in irrigation water after early July due to large uptake of pollutants by rice crop and denitrification. The exponential L (load)-Q(discharge) equations for classified irrigation periods are significant at 0.001 level for irrigation and drainage waters. For drainage water, the concentrations of T-N and COD slightly decrease with discharge, while the T-P concentrations slightly increase with discharge.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.1
• /
• pp.41-47
• /
• 1989

Using computer simulated irregular waves, variations of ocean wave statistics according to sea state are analyzed, and the reasonable conditions that transform the energy spectrum to individual wave statistics are discussed. Ocean wave statistics varying with sea state are found to respond linearly to the spectral peakedness parameter $Q_p$ and spectrum moments $m_n$ (n = 0, 1, 2${\cdots}{\cdots}\;\infty$ ). It is clarified that the 2nd-order spectrum moment is a reasonable parameter which represents the wave statistics including wave periods, and that the spectrum analysis should be carried out under the conditions of minimum data length of 10 times of peak period $T_p$ with time lag of $7T_p$ to satisfy the stable condition of wave statistics.

• Korean Journal of Clinical Pharmacy
• /
• v.26 no.4
• /
• pp.312-317
• /
• 2016

Objective: Midazolam is mainly metabolized by cytochrome P450 (CYP) 3A. Inhibition or induction of CYP3A can affect the pharmacological activity of midazolam. The aims of this study were to develop a population pharmacokinetic (PK) model and evaluate the effect of CYP3A-mediated interactions among ketoconazole, rifampicin, and midazolam. Methods: Three-treatment, three-period, crossover study was conducted in 24 healthy male subjects. Each subject received 1 mg midazolam (control), 1 mg midazolam after pretreatment with 400 mg ketoconazole once daily for 4 days (CYP3A inhibition phase), and 2.5 mg midazolam after pretreatment with 600 mg rifampicin once daily for 10 days (CYP3A induction phase). The population PK analysis was performed using a nonlinear mixed effect model ($NONMEM^{(R)}$ 7.2) based on plasma midazolam concentrations. The PK model was developed, and the first-order conditional estimation with interaction was applied for the model run. A three-compartment model with first-order elimination described the PK. The influence of ketoconazole and rifampicin, CYP3A5 genotype, and demographic characteristics on PK parameters was examined. Goodness-of-fit (GOF) diagnostics and visual predictive checks, as well as bootstrap were used to evaluate the adequacy of the model fit and predictions. Results: Twenty-four subjects contributed to 900 midazolam concentrations. The final parameter estimates (% relative standard error, RSE) were as follows; clearance (CL), 31.8 L/h (6.0%); inter-compartmental clearance (Q) 2, 36.4 L/h (9.7%); Q3, 7.37 L/h (12.0%), volume of distribution (V) 1, 70.7 L (3.6%), V2, 32.9 L (8.8%); and V3, 44.4 L (6.7%). The midazolam CL decreased and increased to 32.5 and 199.9% in the inhibition and induction phases, respectively, compared to that in control phase. Conclusion: A PK model for midazolam co-treatment with ketoconazole and rifampicin was developed using data of healthy volunteers, and the subject's CYP3A status influenced the midazolam PK parameters. Therefore, a population PK model with enzyme-mediated drug interactions may be useful for quantitatively predicting PK alterations.