• Journal of Acupuncture Research
• /
• v.17 no.4
• /
• pp.149-159
• /
• 2000

Bee-venom Acupucture has good effect on pain control but We may be anxious about the problem of side-effect. Bee-venom components are composed of phospholipase $A_2$, hyaluronidase, melitin, apamin, MCD peptide, citrate and so on. Especially Apamin, MCD peptide and histamine cause severe reacting that is named Anaphylaxis. Anaphylaxis is a clinical syndrome characterized by the acute system reaction of multiple organ systems to an IgE-mediated immunologic mediator release in previously sensitized individuals. Respiratory and dermatologic manifestations are the most commonly expressed clinical features of anaphylaxis, and a majority of anaphylactic reactions initially appear to be localized to these two systems. Anaphylatic reaction of bee-venom are expressed clinically ulticaria, itching sensation, erythema, dizziness, nausea, hypotension and so on. Especially ulticaria and erythema are end points of increased vascular permeability and vasodilatation at the other extreme of the clinical spectrum, Gastrointestinal mucosal edema and smooth muscle contraction can result in cramping abdominal pain, nausea, and vomiting. Therefore, we have observed anaphylatic reaction of bee-venom in 11 patients, who visited WonKwang University Kunpo Oriental Medical Center, treated bee venom. The results were summarized as follows : 1. The patient distribution ratio, in regard to sex, was shown to be 1 : 2.67 for male to females. In regard to age, it was shown that people in their 30's was the most predominant case, followed by people in their 20's, 30's, 50's and 60's, respectively. 2. When Anaphylaxis was occured, it was observed to abnormality of CBC, LFT, IgE, IgG. 3. In regard to patient condition, it was observed that fatigue was most frequent. 4. In regard to the number of times and quantity of bee venom inj., it was observed that anaphylaxis is most frequent at 7-10 times(1.6-2.0cc) 5. In regard to duration of reaction, it was observed that people in their l0min' was most frequent. In disappearing duration of anaphylaxic reaction, The results showed under 60min lcases(9%), 60-120min 7cases(64%) and 180-240min 3cases(27%). 6. In symptoms of anaphylaxis, The results showed hypotension 8cases(19%), itching sensation 7cases(16%), nausea 4cases(9%), erythema 4cases(9%) and dizziness 4cases(9%). In mentality, The results showed drowsy 8case(73%) and alert 3cases(27%). 7. Generally, patients were treated with Avil, Dexa IM and PDS, peniramine, cimetidine, Q-zyme per os after H/S, N/S inj. $O_2$ was supplied according to patient's symptom. In 1 severe case, Dopamine was iv injected.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.4
• /
• pp.554-566
• /
• 2018

The rice husk contains nutrients which can be easily utilized by microorganisms, and also has a water retaining ability, which played a crucial part in enabling it to become a biofilter media. In this study, we evaluated the applicability of rice husk pellet bio-scrubber as a microbiological carrier. The pelletization experiment of rice husk as a biological media was performed using PVA and EVA binder. Also, the feasibility tests of rice husk as a biological media for odor removal were carried out in order to know whether rice-husk contains useful components as a media for microbiological growth or not. Lastly, a combined test for odor gas absorption and biological oxidation was conducted using a lab scale bio-filter set-up packed with rice-husk pellets as wet-scrubber. The major components of the rice husk were carbon, hydrogen, nitrogen, and oxygen, while carbon acted as the main ingredient which comprised up to 23.00%. The C : N : P ratio was calculated as 45 : 1 : 2. Oxygen uptake rate, yield and decay rate of the rice husk eluent was calculated to be $0.0049mgO_2/L/sec$, 0.24 mgSS/mgCOD and 0.004 respectively. The most stable form of rice husk pellets was produced when the weight of the rice husk, EVAc, PVAc, and distilled water was 10 : 2 : 0.2 : 10. The prepared rice husk pellets had an apparent density of 368 g/L and a porosity of 59.00% upon filling. Dry rice husks showed high adsorption capacity for ammonia gas but low adsorption capacity for hydrogen sulfide. The bio-filter odor removal column filled with rice husk pellets showed more than 99.50% removal efficiency for NH3 and H2S gas. Through the analysis of circulation water, the prime removal mechanism is assumed to be the dissolution by water, microbial nitrification, and sulfation. Finally, it was confirmed that the microorganisms could survive well on the rice husk pellets, which provided them a stable supply of nutrients for their activity in this long-term experiment. This adequate supply of nutrients from the rice husk enabled high removal efficiency by the microorganisms.

• Investigative Magnetic Resonance Imaging
• /
• v.12 no.2
• /
• pp.100-106
• /
• 2008

The purpose of this study was to confirm the exactitude of in vitro nuclear magnetic resonance spectroscopy(NMRS) and to complement the defect of in vivo NMRS. It has been difficult to understand the metabolism of a cerebellum using in vivo NMRS owing to the generated inhomogeneity of magnetic fields (B0 and B1 field) by the complexity of the cerebellum structure. Thus, this study tried to more exactly analyze the metabolism of a canine cerebellum using the cell extraction and high resolution NMRS. In order to conduct the absolute metabolic quantification in a canine cerebellum, the spectrum of our phantom included in various brain metabolites (i.e., NAA, Cr, Cho, Ins, Lac, GABA, Glu, Gln, Tau and Ala) was obtained. The canine cerebellum tissue was extracted using the methanol-chloroform water extraction (M/C extraction) and one group was filtered and the other group was not under extract processing. Finally, NMRS of a phantom solution and two extract solution (90% D2O) was progressed using a 500MHz (11.4 T) NMR machine. Filtering a solution of the tissue extract increased the signal to noise ratio (SNR). The metabolic concentrations of a canine cerebellum were more close to rat’s metabolic concentration than human’s metabolic concentration. The present study demonstrates the absolute quantification technique in vitro high resolution NMRS with tissue extraction as the method to accurately measure metabolite concentration.

• The korean journal of orthodontics
• /
• v.31 no.6 s.89
• /
• pp.579-587
• /
• 2001

Cleft palate has been studied with epidemiologic and molecular methods, and many etiologic factors have been examined closely Among the research methods, biologic molecule research has been the most important method for cleft palate formation study The $TGF-\beta$ played an important role in cell migration, epithelial-mesenchymal transdifferentiation, extracellular matrix synthesis and deposition. But there was not much research on the correlation cleft palate induced by beta-aminonitroproprionitrile(BAPN) and $TGF-\beta$ expression. The purpose of the present study was to examine how $TGF-\beta$ is expressed in cleft palate rats. 4 Timed-pregnant Sprague-Dawley rats were obtained on the 10th gestation day. On the 13th day of gestation, BAPN-monofumarate salts (${(C_3H_6N_2)}_2{\cdot}C_4H_4O_4$) were individually, ovally administered to 3 pregnant rats at a ratio of 1g/kg body weight. And 4 pregnant rats were sacrificed on day 20 post coitus (p.c.). The $TGF-\beta$ expression in the cleft formed rats fetuses showed the following patterns : 1. Osteoblast and mesenchymal cells of the cleft pa)ate rats were of low expression compared with those of the control rats. 2. The cleft palate rats didn't show uy difference in the $TGF-\beta$ expression of osteocyte item the control rats. 3. In western blot analysis, the thickness of band of $TGF-\beta$ in the cleft palate rats was thinner and more diluted than that of the control rats.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.11-19
• /
• 1982

The average weight of larvae, the percentage of survival larvae and the percentage of moth emergence in first and second generation of striped rice borer showed lower values in Akibare(Japonica variety) compared with those in Milyang 23 (Indica variety). At higher nitrogen level the larvae weight in second generation of striped borer was increased. The percentage of survival larvae in second generation was gradually decreased by applying the silicate fertilizer in both cultivars. The moth emergences in both generations of striped rice borer were also lower at high levels of silicate fertilizer. The percentage of white head of rice plant was reduced by the application of silicate fertilizer. The ratio of SiO$_2$ to T-N of the rice stem was related negatively with the percentage of survival larvae and the moth emergence in second generation of striped rice borer, and also with the percentage of white head of rice plant.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.2
• /
• pp.92-99
• /
• 2002

The study was conducted to investigate the changes of soil properties and evaluation of plant utilization according to the application of compost used with phyllite. At this experiment, the plant cultivation test(lettuce and radish plant) was carried out to know about physico-chemical properties of compost, humus degradarion and stabilization degree, and some effects among rhe treatments were best at 20Mg/ha in PSPC 10(Phyllite, Saw dust, Pig manure Compost) plots and ar 10Mg/ha in PSPC 20 treatments, respectively. The EC value was high in the compost. Therefore the EC was appeared more than 2ds/m at the applied 40Mg/ha with compost. And in case of lettuce, Avail.-$P_2O_5$ and EC were more increased than in the radish plots, highly. In contrast, in case of radish, Toral-N, Total-C, and EC contents were decreased after plant cultivation. That is, it could know that radish was fond of absorprion of nitrogen. Also, BD values of soil physical properties were decreased according to increasing of phyllite addition ratio, however water holding capacity(WHC) was increased. The plant test had not been darnaged through the application of compost used with phyllite in soil and there had not been worse on changing of soil physico-chemical properties. Consequently, phyllite composts have been thought on agricultural utilized possibility.

• Journal of Biosystems Engineering
• /
• v.3 no.2
• /
• pp.34-34
• /
• 1978

To find out the power tiller's travel and tractive characteristics on the general slope land, the tractive p:nver transmitting system was divided into the internal an,~ external power transmission systems. The performance of power tiller's engine which is the initial unit of internal transmission system was tested. In addition, the mathematical model for the tractive force of driving wheel which is the initial unit of external transmission system, was derived by energy and force balance. An analytical solution of performed for tractive forces was determined by use of the model through the digital computer programme. To justify the reliability of the theoretical value, the draft force was measured by the strain gauge system on the general slope land and compared with theoretical values. The results of the analytical and experimental performance of power tiller on the field may be summarized as follows; (1) The mathematical equation of rolIing resistance was derived as $$Rh=\frac {W_z-AC \[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\] sin\theta_1}} {tan\phi \[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]+\frac{tan\theta_1}{1}$$ and angle of rolling resistance as $$\theta _1 - tan^1\[ \frac {2T(AcrS_0 - T)+\sqrt (T-AcrS_0)^2(2T)^2-4(T^2-W_2^2r^2)\times (T-AcrS_0)^2 W_z^2r^2S_0^2tan^2\phi} {2(T^2-W_z^2r^2)S_0tan\phi}\] $$and the equation of frft force was derived as$$P=(AC+Rtan\phi)\[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]cos\phi_1 ? \frac {W_z ?{AC\[ [1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]sin\phi_1 {tan\phi[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\]+ \frac {tan\phi_1} { 1} ? W_1sin\alpha $$The slip coefficient K in these equations was fitted to approximately 1. 5 on the level lands and 2 on the slope land. (2) The coefficient of rolling resistance Rn was increased with increasing slip percent 5 and did not influenced by the angle of slope land. The angle of rolling resistance Ol was increasing sinkage Z of driving wheel. The value of Ol was found to be within the limits of Ol =2? "'16?. (3) The vertical weight transfered to power tiller on general slope land can be estim ated by use of th~ derived equation: $$R_pz= \frac {\sum_{i=1}^{4}{W_i}} {l_T} { (l_T-l) cos\alpha cos\beta ? \bar(h) sin \alpha - W_1 cos\alpha cos\beta$$The vertical transfer weight $R_pz$ was decreased with increasing the angle of slope land. The ratio of weight difference of right and left driving wheel on slop eland,$\lambda= \frac { {W_L_Z} - {W_R_Z}} {W_Z} $, was increased from ,$\lambda$=0 to$\lambda$=0.4 with increasing the angle of side slope land ($\beta = 0^\circ~20^\circ) (4) In case of no draft resistance, the difference between the travelling velocities on the level and the slope land was very small to give 0.5m/sec, in which the travelling velocity on the general slope land was decreased in curvilinear trend as the draft load increased. The decreasing rate of travelling velocity by the increase of side slope angle was less than that by the increase of hill slope angle a, (5) Rate of side slip by the side slope angle was defined as $ S_r=\frac {S_s}{l_s} \times$ 100( %), and the rate of side slip of the low travelling velocity was larger than that of the high travelling velocity. (6) Draft forces of power tiller did not affect by the angular velocity of driving wheel, and maximum draft coefficient occurred at slip percent of S=60% and the maximum draft power efficiency occurred at slip percent of S=30%. The maximum draft coefficient occurred at slip percent of S=60% on the side slope land, and the draft coefficent was nearly constant regardless of the side slope angle on the hill slope land. The maximum draft coefficient occurred at slip perecent of S=65% and it was decreased with increasing hill slope angle $\alpha$. The maximum draft power efficiency occurred at S=30 % on the general slope land. Therefore, it would be reasonable to have the draft operation at slip percent of S=30% on the general slope land. (7) The portions of the power supplied by the engine of the power tiller which were used as the source of draft power were 46.7% on the concrete road, 26.7% on the level land, and 13~20%; on the general slope land ($\alpha = O~ 15^\circ ,\beta = 0 ~ 10^\circ$) , respectively. Therefore, it may be desirable to develope the new mechanism of the external pO'wer transmitting system for the general slope land to improved its performance.

• Korean Journal of Poultry Science
• /
• v.29 no.3
• /
• pp.185-194
• /
• 2002

This study was conducted to compare the biochemical properties on chicken meat among Korean Ogol Chicken(KOC), the Cross-bred Ogol chicken(CBO), and broiler(BRO). The results were as follows: the total protein content of the CBO was significantly(P<0.05) higher by 0.83% in male and by 1.37% in female than that of KOC. In the total protein content, CBO also had significantly(P<0.05) higher percentages than that of BRO(21.73%). In the total fat content of CBO, there was a significant (P<0.05)difference between male(0.69%) and female(0.91%). However, on the regarding both sexes the total fat content percentage of CBO was a greatly lower than that of BRO(1.92%). The CBO showed a significantly (P<0.05) higher calcium ion content, with 103.67 ppm and 118.00 ppm in male and female, respectively, than traditional broiler breed(73.80 ppm). But KOC and CBO contained similar calcium ion content in each other. The CBO contained significantly(P<0.05) higher essential amino acids(cystine, serine, lucine, phenylalanine, arginine, proline) than the BRO. In fatty acid composition, the CBO contained higher unsaturated fatty acids, with 34.22 and 26.23% for male and female, respectively, than the KOC containing 29.76 and 24.59% fur male and female, respectively. These were substantially higher levels compared to 19.59% in BRO. Higher trend in Docosa hexaenoic acid(DHA) level was observed in the CBO(5.47% and 2.89% for male and female, respectively) compared to the KOC(2.92% and 1.00%). While DHA in the broiler meat was not detectable. In the ratio between n-6 and n-3, the CBO(3.87∼6.14) appeared to have a better profile than BRO(25.71). The brightness of Commision Internationale do L＇Eclairage for CBO were 56.97 and 58.06 for male and female, respectively. Whereas broiler meat showed 62.88. Collectively, these color properties were higher than KOC.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.2
• /
• pp.124-128
• /
• 2016

The objective of this research was to determine the effects of harvesting frequency and fertilization levels on botanical composition, dry matter yield, and forage feed compositions of Alpine grassland at 800 m altitude. This research lasted for three years at National Alpine Agricultural Research Institute in Pyeongchang with two harvesting frequency schedules (two and three times annually) and two levels of fertilizer application (conventional level of fertilizer at 280-200-240 kg/ha and a lower level of fertilizer at 200-200-200 kg/ha for N, $P_2O_5$, and $K_2O$). Mixture combinations with seeding rate (kg/ha) were as follows: Orchardgrass 18, Tall fescue 9, Timothy 8, Kentucky bluegrass 3, and Ladino Clover 2. The gramineae ratio ranged from 93.2 to 95.3%. Therefore, gramineae forage was considered as the dominant plant in this experiment. No significant (p>0.05) difference was observed in forage dry matter yield between the two harvesting frequency treatments (two times at 9.8 ton/ha and three times at 8.6 ton/ha). However, forage dry matter yield in the two times of harvesting frequency tended to be greater than that in the three times of harvesting frequency. Significantly (p<0.05) higher forage dry matter yield in the standard fertilization level group than the lower fertilization level group (9.8 ton/ha vs. 8.7 ton/ha) was observed. However, there was no significant (p>0.05) difference in forage crude protein concentration between the two harvesting frequency treatment groups, although the concentration in the group with three times of harvesting frequency tended to be higher. In contrast, crude fiber concentration in the group with two times of harvesting frequency tended to be higher, although the difference was not statistically significant (p>0.05). Crude protein, ether extract, crude fiber, and organic matter concentrations were not significantly (p>0.05) different between the two groups with different fertilization levels. Based on these results, it was concluded that the group with two times of harvesting frequency with conventional fertilization level might be proper for obtaining better forage productivity for Alpine grassland at 800 m altitude.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.10
• /
• pp.649-657
• /
• 2017

A rupture in a high-pressure pipe causes the fluid in the pipe to be discharged in the atmosphere at a high speed resulting in a supersonic jet that generates the compressible flow. This supersonic jet may display complicated and unsteady behavior in general. In this study, Computational Fluid Dynamics (CFD) analysis was performed to investigate the compressible flow generated by a supersonic jet ejected from a high-pressure pipe. A Shear Stress Transport (SST) turbulence model was selected to analyze the unsteady nature of the flow, which depends upon the various gases as well as the diameter of the pipe. In the CFD analysis, the basic boundary conditions were assumed to be as follows: pipe of diameter 10 cm, jet pressure ratio of 5, and an inlet gas temperature of 300 K. During the analysis, the behavior of the shockwave generated by a supersonic jet was observed and it was found that the blast wave was generated indirectly. The pressure wave characteristics of hydrogen gas, which possesses the smallest molecular mass, showed the shortest distance to the safety zone. There were no significant difference observed for nitrogen gas, air, and oxygen gas, which have similar molecular mass. In addition, an increase in the diameter of the pipe resulted in the ejected impact caused by the increased flow rate to become larger and the zone of jet influence to extend further.