• 한국물환경학회지
• /
• 제28권6호
• /
• pp.833-842
• /
• 2012

In this study Window interface to Hydrological Simulation Program-FORTRAN (HSPF) developed by the United States Environmental Protection Agency (EPA) was applied to the upstream of Namgang watershed to estimate its applicability for estimating Delivery Ratio (DR) of water pollutants for Total Maximum Daily Load (TMDL). BASINS/HSPF which is selected in this study, is found to be appropriate for simulation of daily flow and water quality in target basins. DR was estimated utilizing discharge loads of unobserved sub-basin and delivery load of unobserved locations obtained not by actual evaluation but by simulation through validation and verification. Annual average DR of BOD, TN and TP were 0.97 ~ 1.50, 2.23 ~ 3.21, and 0.81 ~ 1.09 respectively. Net DR of dependent basins excluding influence of upstream basin was 1.50 ~ 1.70, 0.55 ~ 0.69, and 0.24 ~ 0.31, all of which are lower than those of independent basins area. Utilizing the model selected by this research, DR and Net DR of unobserved basins will be estimated, which will help determine priorities in management of basin areas.

• The Journal of Korean Physical Therapy
• /
• 제24권4호
• /
• pp.241-246
• /
• 2012

Purpose: We investigated the effect of postural stability and balance with foot orthotics in hemiplegic patients. Methods: The subjects enrolled in this study were 16 hemiplegic patients who were examined for balance ability, weight distribution, and limits of stability with or without foot orthotics insole. Balance was measured according to a stance position by BIORESCUE: static balance open eyes (SEO), static balance close eyes (SEC), dynamic balance open eyes (DEO), dynamic balance close eyes (DEC), right and left weight distribution (RLWD), anterior and posterior weight distribution (APWD) and limit of stability (LOS). The data were analyzed with SPSS window version 18.0 (IBM Co., Armonk, NY, USA). Results: The results were of significant changes to the SEO (p<0.05), RLWD (p<0.05), APWD (p<0.05), and LOS (p<0.05). The SEC, DEO and DEC were not found to be statistically significant. Conclusion: It was found that foot orthotics affected the balance for hemiplegic patients. Therefore, it is thought to help fall prevention to measure the balance ability.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.399-399
• /
• 2012

II-V 족 화합물 반도체인 황화카드뮴(CdS)은 상온에서 2.42 eV의 밴드갭을 갖는 직접 천이형 물질로서 CdTe 또는 $CuInSe_2$와 같은 박막형 태양전지의 투과층(window layer)으로 널리 사용되고 있다. CdS 박막은 전자빔 증착법(e-beam evaporation), 화학용액증착법(chemical bath deposition), 열분해법(spray pyrolysis), 스퍼터링법(sputtering) 등으로 제작되고 있다. 이 중 스퍼터링법의 경우, 다른 증착법에 비해 조작이 간단하고 넓은 면적에서 균일한 박막을 증착할 수 있을 뿐만 아니라, 박막두께 조절이 용이하다. 따라서 본 실험에서는 RF 마그네트론 스퍼터링법으로 증착된 CdS 박막의 기판온도 및 열처리 온도변화에 따른 구조적 및 광학적 특성을 조사하였다. 기판은 RCA 기법으로 세정된 Corning Eagle 2000 유리 기판을 사용하였다. 박막 공정은 초기 진공 $1{\times}10^{-6}Torr$ 상태에서 20 sccm의 Ar 가스를 주입하고 100 W의 RF 파워, 7 mTorr의 공정 압력에서 기판 온도를 $200^{\circ}C$부터 $500^{\circ}C$까지 변화시키면서 수행하였다. 증착된 CdS 박막은 질소 분위기의 가열로(furnace)를 이용해 $300-500^{\circ}C$ 온도에서 30분간 열처리되었다. 시료들의 표면 형상은 scanning electron microscope를 사용하여 관찰하였으며, UV-vis-NIR spectrophotometer를 사용하여 400-1,000 nm 파장영역에서의 투과율을 측정하였다. 그리고 X-선 회절분석(X-Ray Diffraction)으로 결정구조를 조사하고 결정립 크기를 산출하였다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2012년도 하계학술대회
• /
• pp.83-86
• /
• 2012

본 논문에서는 다양한 변이 추정 방식 중 영역기반(Area-based) 알고리듬과 특정기반(Feature-based) 알고리듬을 결합한 하이브리드(Hybrid) 변이추정 알고리듬을 제안한다. 제안하는 알고리듬은 Features from Accelerated Segment Test(FAST) 코너 점 추출기[2]를 이용하여 좌, 우 영상 각각의 특징 점을 추출한 후, 특징 점들의 정보를 이용한 스테레오 정함을 통해 신뢰도 높은 초기 변이지도(Disparity map)를 생생하게 된다. 그러나 생성된 초기 변이지도는 조밀하지 못하므로, 조밀한 변이 지도를 획득하기 위해 특징점이 추출된 영역에 대해서는 추정된 초기 변이 값을 이웃 픽셀과의 색 유사도를 고려하여 전파시키고 특징 점이 추출되지 않은 영역에 대해서는 이진 윈도우(Binary window)를 활용한 영역기반 변이추정 알고리듬[1]을 이용하여 변이 값을 추정한다. 이를 통해, 제안 알고리듬은 특징 기반 알고리듬에서 발생할 수 있는 보간법 문제를 해결함과 동시에 신뢰도가 높은 초기 변이지도를 사용함으로써, 영역 기반 알고리듬의 정합 오차를 줄여 신뢰도 높은 변이지도를 생생할 수 있다. 실험 결과 추정된 초기 변이지도는 ground truth와 비교 시 약 99%이상의 정확도를 보이며, 특징 점이 추출된 영역에서 기존의 영역기반 알고리듬보다 더 정확한 변이 값이 추정되었음을 확인하였다.

• 가정간호학회지
• /
• 제19권1호
• /
• pp.11-18
• /
• 2012

Purpose: The aim of this study is to evaluate the efficiency of the outpatient clinics in a hospital, using DEA. Methods: Data were collected using an activity-based costing system, medical information system, and annual reports of customer satisfaction management team of a general hospital in a city. The input variables were the number of doctors, the number of nurses, and the number of staffs. The output variables were the number of treatment times, the number of outpatient clinic patients, the total profits from outpatient clinic, the patient's satisfaction score, and the number of re-visit appointments. EMS Window version 3.1 was used to measure the efficiency score and benchmarking analysis. Results: The average efficiency score of 24 outpatient clinics was about 82.01%. Thirteen outpatient clinics had 100% efficiency score among them. The lowest efficiency score was 57.56%. Conclusion: According to these results, we found that, generally, outpatient clinics were operated very efficiently. However, some outpatient clinics had low efficiency and they needed specialized outcome improvement strategies. To increase the efficiency of inefficient outpatient clinics, we will recommend using results of DEA, as a benchmark point of the most efficient outpatient clinics.

• 한국지열·수열에너지학회논문집
• /
• 제8권2호
• /
• pp.27-35
• /
• 2012

Five zero energy house models developed in Korea for the purpose of the energy performance were compared and analyzed in the study. The standard passive house model applying common technology and efficient energy performance elements was proposed. Standard passive house 5 models have been developed commonly aiming at 100% energy saving, applying high-performance and high-efficiency exterior thermal insulation, using 3 low-e coated window system, and targeting average 0.65 ACH to enhance privacy. Energy recovery ventilators and dry and cold radiant heating floor has been partially applied. Eco-design techniques such as the awning device, heat insulating door, using natural light have been used. Solar and geothermal systems as the application of renewable energy technologies have been commonly applied. And fuel cells were applied to a partial model. The standard model based on common technical elements and average performance of each element and obtained from five model analysis has been proposed in the study.

• 간호행정학회지
• /
• 제19권3호
• /
• pp.329-339
• /
• 2013

Purpose: This study was conducted to provide basic data on the nursing Happiness Index and identify factors influencing nurses by describing their perception of lifestyle, health behavior, nursing professionalism, Happiness Index, and turnover intention. Methods: On July 2012, 700 nurses from 10 general hospitals were surveyed, but 23 were omitted due to missing or incomplete data. The focus of this study was the Organization for Economic Co-operation and Development (OECD) Happiness Index, consisting of 11 OECD identified topics concerning living conditions and quality of life. Data were analyzed using $x^2$-tests, t-test, ANOVA, Pearson correlation coefficients and multiple regression with SPSS/WINdow 14.0. Results: Mean score for nurses' Happiness Index was 3.03 on a scale of 5. There were significant differences on the Happiness Index for the following: age, marriage, children, education, position, work experience, wages, number of beds, medical institution, health behavior, weight, and meal patterns. There was a positive correlation between the happiness index and nursing professionalism but a negative correlation between the happiness index and turnover intention. Conclusion: Results indicate that factors influencing happiness are autonomy, sense of calling and turnover intention suggesting the need to improve nursing professionalism for a life of happiness among hospital nurses.

• 천문학회보
• /
• 제37권2호
• /
• pp.141.2-141.2
• /
• 2012

We present photometric solutions of the 26,212 eclipsing binaries discovered in the LMC by Graczyk et al. (2011). They published that 70 percent of a total are detached systems. Another 25 and 5 percent are semi-detached and contact binaries, respectively. We discovered that 21 percent of 26,121 eclipsing binary stars are eccentric orbit systems. The binary star distribution in the LMC is different from those of the Galactic center direction (Bade window). It is very interesting that there are only 5 of 357 (2 percent) stars have eccentric orbit in the Galactic Center (Kang 2011). We selected the light curve of 18,274 detached systems. Then we estimated the fundamental parameters on the basis of their photometric solutions and the semi-major-axis (a) assuming the distance modulus to the LMC~18.50. We compared the estimated fundamental parameters with an empirical mass-luminosity relation and consistency between mass-radius relation base on stellar evolution model in the low metallicity (Z=0.008) by Bertelli et al. (2009). This method allows for independent determine of the fundamental parameters of the eclipsing binaries in the LMC without the radial velocity curves.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.179-187
• /
• 2020

This paper investigates the construction equipment accidents by time. Construction sites are unique with many different hazardous conditions which cause accidents. According to the Occupational Safety and Health Administration (OSHA), accidents related to construction equipment are one of the most leading causes of fatal injuries in the construction industry. While there have been many studies investigating the equipment-related accidents, few research studies provided in-depth analyses about the time that accidents frequently occurred. By using the OSHA accidents data collected between 1997 and 2012, this paper analyzed the accidents data by time, equipment type including excavator, backhoe, dozer, and crane, accident cause, and injury class. The analyses revealed that the time window with most accidents was between 13:00 and 13:59. In terms of the injury class, the time windows with the highest numbers of equipment accidents were between 13:00 and 13:59 and between 11:00 and 11:59 for fatality and hospitalization, respectively. For the accident causes, equipment operator's error was the highest number of accident causes. It is expected that findings from the analyses can be used to more strategically develop management plans and guidelines to prevent accidents related to construction equipment to practitioners.

• 한국조리학회지
• /
• 제18권4호
• /
• pp.148-165
• /
• 2012

본 연구는 수도권 지역 윈도우 베이커리 종사원을 대상으로 설문조사를 통해 위생 교육, 위생지식과 위생 관리 현황을 파악하고자 수행하였다. 설문문항은 위생 지식과 위생 교육, 위생 관리 수행 현황에 대한 문항으로 구성되었다. 총 300부의 설문지를 조사하였고 회수된 295개의 설문지를 대상으로 분석하였다. 위생 지식 분석에서 가장 높은 정답률을 얻은 문항은 '손톱은 짧게 깎고 매니큐어를 바르지 않는다' 였으며, 가장 낮은 정답률을 보인 항목은 '식중독은 여름철에만 일어난다' 로 67.8%로 나타났다. 조사자들의 위생관리수행 정도에서 '손톱은 짧게 깎고 매니큐어 등을 바르지 않는다'와 '화장실을 사용한 후에는 손을 씻는다.'는 위생지식 정도와 마찬가지로 가장 높은 수행정도(4.67)를 나타내었다. 위생지식 점수에서 낮은 정답률을 보였던 '손세척기를 갖추어 사용한다'(3.12)는 위생 관리 수행 정도에서 가장 낮은 순위를 나타나고 있었다. 직급에 따른 위생 지식 정도는 개인위생, 시설 및 작업장 위생, 재료 및 제조 위생에서 공통적으로 대표 또는 공장장의 점수가 낮게 나타났다. 근무기간이 1년 이하인 경우 위생 지식수준이 높았으며, 위생교육의 횟수가 많을수록 위생지식 정도가 유의적으로 높은 것으로 나타났고(p<0.05), 위생 관리 수행정도를 조사한 결과 개인위생이 가장 높고 그다음으로 재료 및 제조 위생, 시설 및 작업장 위생의 순으로 나타났다. 근무 연수에 따른 수행정도에서는 1년 미만인 경우 수행수준이 낮은 것으로 나타났으며, '위생교육을 받은 적이 없다'는 경우 위생관리 수행 정도에서는 유의적(p<0.05)으로 낮은 결과를 나타냈다. 연령, 직급, 위생 교육 횟수, 체크 리스트 유무에 따라 베이커리 위생 수행정도를 각 문항별로 나누어 분석한 결과 전반적으로 위생교육을 받지 않았거나 체크리스트가 없는 경우 수행수준이 낮게 나타났다.