• Laser Solutions
• /
• v.1 no.1
• /
• pp.18-23
• /
• 1998

A Study on microstructural changes of sensitized Alloy 600 which was rapidly solidified by a $CO_2$ laser beam was conducted using microscopic equipments such as SEM and TEM. Dissolution of Cr-rich carbides and resultant Cr recovery on the grain boundaries occurred in the heat affected zone (HZA). The microstructure of the laser melted zone (LMZ) having epitaxially solidified from the HAZ was mainly celluar-dendritic with the 〈100〉 crystallographic direction of growth. The Cr concentration was observed to increase along the cell bondaries, and tiny particles were distributed along the cell walls with tangled dislocations around them. Cr-rich carbides had been completely melted by the high density of a laser beam, and were not re-precipitated during the matrix solidification due to a fast cooling rate in the LMZ.

• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.3
• /
• pp.32-37
• /
• 2002

In this paper soybean flour to weak heat the soybean pulverizing is a nutritive qualities on the demolition by friction fever. in the soybean moisture and protein albumen, it is get tangled the present of soybean to pulverizing of the hesitate to do difficult. full fat activated soybean flour is the same as lipoxygenase a low temperature by handling to ferment of the not demolition is not method. electron wave the drying soybean with far-infrared to using soybean powder of good powder manufacturing method of development industry a people to health contribution

• Conservation Science in Museum
• /
• v.5
• /
• pp.1-4
• /
• 2004

While excavating relics in Uksu-dong of Daegu and Oksan-dong of Gyeongsan, 38 units of the earthen kilns used during the Three Kingdom era were discovered. Nine pieces of charcoal were collected for examination from 8 kilns out of 38. The result identified 4 pinus densiflora, 3 Quercus sp. and 1 Platycarya strobilacea Sieb. The remaining 1 tree could not be identified because most of the remaining wood was mixed and tangled with clay.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.150-150
• /
• 2003

wide bind gap과 wurtzite hexagonal structure를 가지고 있으며 청색 발광 및 청자색 레이저 특성을 보이는 III-V족 화합물반도체 GaN는 laser diodes (LD) 및 light emitting diodes (LED) 재료로 주목받고있는 주요 전자재료이다. 본 연구에서는 GaN를 chemical vapor deposition (CVD) 법을 이용하여 vapor-liquid-solid (VLS) mechanisum에 의하여 GaN나노와이어 형태로 성장시켰다. 기판은 (001)Si을 사용하였고 suputtering을 이용하여 GaN와 AlN의 double buffer layer (DBL)를 증착시켰으며 촉매로는 Ni을 사용하였다. 또한, 원료로는 고순도 Ga금속과 NH$_3$ gas를, carrier gas로는 Ar을 사용하여 GaN/AlN/(001)Si 위에 GaN 나노와이어를 성장시켰다. 성장된 GaN 나노와이어는 DBL의 두께, Ga source의 양, 튜브 안의 압력, 튜브 안의 위치 등의 제 공정변수에 따라 tangled, straight 등의 다양한 형상을 보였으며 지름은 약 30~100 nm, 길이는 수 $\mu\textrm{m}$로 관찰되었다. GaN나노와이어의 결정성, 형상 및 발광특성 등을 x-ray diffraction (XRD), photoluminesence (PL), scanning electron microscope (SEM), transmision electron microscope (TEM) 등을 이용하여 측정하였으며 제 공정변수와의 상관관계를 규명하였다.

• Journal of Biosystems Engineering
• /
• v.23 no.5
• /
• pp.491-498
• /
• 1998

Transplanting process during the tissue culture of potato seedlings is costly, since the cost of highly skilled labor working in the sanitary environment takes up about 60-70% of the production cost. The objective of this study was to develop a soft gripper of a transplanting robot system for the labor-saving tissue culture. The prototype of the soft gripper was consisted of power-transmitting part finger and plant contacts. The power transmitting part transformed the rotating motion of a step motor to the reciprocating motion of the finger. Plant stems used in the test were potato seedlings cultured for six weeks. The dimensional characteristics of cultured seedlings, the compressive strengths of the stems, the extractive force from the culture medium and the gripping force of the finger were measured. A proper gripping force was found to be 0.343N at the extractive force of 0.41N when the plant contacts were made of silicon. Sixteen plants out of 70 trials were tangled with others, resulting in the success rate of 77.1%.

• Journal of radiological science and technology
• /
• v.41 no.5
• /
• pp.471-478
• /
• 2018

Oogenesis process of ovary produces a lot of undifferentiated cells. Especially, the radiation exposure of early immature cells in the process of growth to oocyte causes serious disabilities. This study examined the radiation damage mechanism of undifferentiated cells and organelles in oogenesis process, and the radioprotection after injection of alliin. The ultrastructure after 7Gy X-ray irradiation on the white rat was observed in the experiment. The results is as follows. It was observed that the nucleus membrane of an oogonium was damaged and vacuolated in the several parts after 15 days of irradiation. The damage of mitochondria membrane and flow in cytoplasm after 20 and 30 days was found in the oogonium. After 40 days observation, peroxidation of fat droplets was found and organelles were tangled each other in ovary tissue. The partial damage of nuclear membrane in oogonium past 15 days after injection of alliin was found, but decreased remarkably. Mitochondria, Golgi body, and rough endoplasmic reticulum were also clearly observed, therefore, radioprotection effects in alliin was confirmed partially.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.7
• /
• pp.59-65
• /
• 1996

A major problem in automation of turning operations is the difficulty in obtaining a sufficient and reliable chip control. Therefore it becomes desirable to find a method which can detect the chip form. Newly born chips in usual metal cutting radiate infrared rays. When such chips run out of cutting point quickly, the radiated energy from the zone around the tool is low compared with that of the case when long tangled chips are staying around the tool. The difference in chip pattern can be detected from the output of pyrometer. But, strictly speaking, only the output of pyrometer does not identify the chip form because that is the removal of chip. Therefore, in this paper, a method of the identification of chip form using output of pyrometer and fuzzy inference is developed.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.146-149
• /
• 2007

The 2-step manufacturing method consisting of preforming and stamping processes was developed to manufacture composite bipolar plates for PEMFCs. The preform was composed of expanded graphite, graphite flake and phenol resin. Precuring conditions were optimized by checking the electrical conductivity, flexural strength and microstructure. Precuring temperature ($100^{\circ}C$) slightly above the melting point of phenol powders ($90^{\circ}C$) induced moderate curing, but also prevented excessive curing. Preforms utilizing the tangled structure of expanded graphite were easily fabricated at low pressure of 0.07-0.28MPa. The proper precuring time, 5min, was determined to fabricate the preform stably because insufficient and excessive precuring deteriorated the flexural strength of composite bipolar plates.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.4
• /
• pp.140-143
• /
• 2005

Carbon Nanotube(CNTs) counter electrode is a promising alternative to Platinum counter electrode for dye sensitized solar cells (DSSCs). In this study, CNT counter electrodes having different visible light transmittance were prepared on fluorine-doped tin oxide (FTO) glass surface by spray coating method. Microstructural images show that there are CNT-tangled region coated on FTO glass counter electrodes. Using such CNT counter electrodes and screen printed $TiO_2$ electrodes, DSSCs were assembled and its I-V characteristics have been studied and compared. Light energy conversion efficiency of DSSCs increased with decreasing in light transmittance of CNT counter electrode. Efficiency of DSSCs having CNT counter electrode is compatible to that of Pt counter electrode.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.148-150
• /
• 2006

In this paper, we propose a new method for detection of mass-type breast cancer in dense mammogram. As the proposed method analyzes texture of the breast tissue using method by fusing Homogeneity and Ranklets, improve problem of traditional method. Homogeneity gives the measure of uniform density, and Ranklets determine orientation selective property at vertical, horizontal and diagonal in mass region. The proposed method is suitable to dense mammogram with tangled normal tissue and cancer tissue. SVM(Support Vector Machine) classifier is used for effective detection of mass-type breast cancer in dense mammogram.