• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.113-118
• /
• 2005

This paper shows a satellite battery cell voltage monitor system to make differential voltage measurements when one or both measurement points are beyond voltage range allowed by a conventional differential amplifier. This system is particularly useful for monitoring the individual cell voltage of series-connected cells that constitute a rechargeable satellite battery in which some cell voltages must be measured in the presence of high common mode voltage.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.6
• /
• pp.619-629
• /
• 2002

This paper describes the implementation of a RTSP-based MPEG-4 streaming system. The implemented system consists of content authoring tool, streaming server and streaming client. The existing MPEG-4 multiplexer has been modified with improvement to generate a file format with which the server load and streaming delay are reduced. The streaming system uses RTSP, instead of DMIF, as its communication protocol. With RTSP, the server provides extensive control functionalities as in DMIF and its implementation effort is greatly simplified. The implemented system supports the user interactivity for both streaming and local file playback. The effectiveness of the proposed multiplexing scheme has been validated with the various experiments on the fully functional server.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.9A
• /
• pp.2289-2304
• /
• 1998

For the performance analysis and traffic control of ATM networks carrying video sequences, need an appropriate video traffic model. In this paper, we propose a new traffic model for MPEG compressed videos which are widely used for any type of video applications at th emoment. The proposed modeling scheme uses scene-based traffic characteristics and considers the correlation between frames of consecutiv GOPs. Using a simple scene detection algorithm, scene changes are modeled by state transitions and the number of GOPs of a scene state is modeled by a geometric distirbution. Frames of a scene stte are modeled by mean I, P, and B frame size. For more accurate traffic modeling, quantization errors (residual bits) that the state transition model using mean values has are compensated by autoregressive processes. We show that our model very well captures the traffic chracteristics of the original videos by performance analysis in terms of autocorrelation, histogram of frame bits genrated by the model, and cell loss rate in the ATM multiplexer with limited buffers. Our model is able to perrorm translations between levels (i.e., GOP, frame, and cell levels) and to estimate very accurately the stochastic characteristics of the original videos by each level.

• Journal of the Optical Society of Korea
• /
• v.13 no.3
• /
• pp.354-360
• /
• 2009

We investigate theoretically the tolerance of 40 Gbps phase-modulated (PM) duobinary signals using a vestigial sideband (VSB) filter on impairments which occurred in dense wavelength-division multiplexing (DWDM) systems, compared to the conventional duobinary signals. Our simulation results show that PM duobinary signals can't have the gain on the spectral efficiency achieved by utilizing the VSB filtering technique. In order to increase the spectral efficiency, they indispensably require to be transmitted at the optimum bandwidth of multiplexer (MUX) and demultiplexer (DEMUX) since they are susceptible to inter-channel crosstalk. It is also shown that the PM duobinary modulation format has a large tolerance on self-phase modulation (SPM) and cross-phase modulation (XPM) under the condition which MUX and DEMUX have been tuned at an optimum bandwidth; it has 1.2 dB power penalty at the fiber launching power (FLP) of 15 dBm and the channel spacing of 50 GHz.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.2
• /
• pp.1-11
• /
• 1997

We developed a base station modulator ASIC for CDMA digital cellular system. In CDMA digital cellular system, the modulation is performed by convolutional encoding and QPSK with spread spectrum. The function blocks of base station modulator are CRC, convolutional encoder, interleaver pseudo-moise scrambler, power control bit puncturing, walsh cover, QPSK, gain controller, combiner and multiplexer. Each function block was designed by the logic synthesis of VHDL codes. The VHDL code was described at register transfer level and the size of code is about 8,000 lines. The circuit simulation and logic simulation were performed by COMPASS tools. The chip (ES-C2212B CMB) contains 25,205 gates and 3 Kbit SRAM, and its chip size is 5.25 mm * 5,45 mm in 0.8 mm CMOS cell-based design technology. It is packaged in 68 pin PLCC and the power dissipation at 10MHz is 300 mW at 5V. The ASIC has been fully tested and successfully working on the CDMA base station system.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.6
• /
• pp.760-767
• /
• 2014

This paper describes a high-radix crossbar switch design with low latency and power dissipation for Network-on-Chip (NoC) applications. The reduction in latency and power is achieved by employing a folded-clos topology, implementing the switch organized as three stages of low-radix switches connected in cascade. In addition, to facilitate the uniform placement of wires among the sub-switch stages, this paper proposes a Mux-Matrix-Mux structure, which implements the first and third switch stages as multiplexer-based crossbars and the second stage as a matrix-type crossbar. The proposed 256-radix, 8-bit crossbar switch designed in a 65nm CMOS has the simulated power dissipation of 1.92-W and worst-case propagation delay of 0.991-ns while operating at 1.2-V supply and 500-MHz frequency. Compared with the state-of-the-art designs in literature, the proposed crossbar switch achieves the best energy-delay-area efficiency of $0.73-fJ/cycle{\cdot}ns{\cdot}{\lambda}^2$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.2A
• /
• pp.102-109
• /
• 2003

In this paper, the new multiplicative algorithm using standard basis over GF(2m) is proposed. The multiplicative process is simplified by data select method in proposed algorithm. After multiplicative operation, the terms of degree greater than m can be expressed as a polynomial of standard basis with degree less than m by irreducible polynomial. For circuit implementation of proposed algorithm, we design the circuit using multiplexer and show the example over GF(24). The proposed architectures are regular and simple extension for m. Also, the comparison result show that the proposed architecture is more simple than privious multipliers. Therefore, it well suited for VLSI realization and application other operation circuits.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1A
• /
• pp.1-9
• /
• 2005

We have studied the dispersion properties of a 40 channel x 10 Gbit/s wavelength division multiplexer(WDM) transmission link using standard single mode fiber with all EDFA amplification over 30 x 100 km spans. The dispersion map of the link was investigated by adding fiber sections with positive or negative dispersion at the transmitter, within each amplifier span, and at the receiver. Optimum combinations of these dispersive fiber lengths were attained to significantly enhance the overall transmission performance.

• Convergence Security Journal
• /
• v.13 no.6
• /
• pp.3-9
• /
• 2013

With the rapidly changing information communication environment and development of technologies, the informati on networks are evolved from traditional fixed form to an active variable network that flexible large variety of data can be transferred. To reflect the needs of users, the next generation using DWDM (Dense Wavelength Division M ultiplexing) transmission system and OXC (Optical Cross Connect) form a dynamic network. After that GMPLS (Ge neralized Multi-Protocol Label Switching) can be introduced to dynamically manage and control the Reconfigurable Optical Add-drop Multiplexer (ROADM)/Photonic Cross Connect (PXC) based network. This paper propose a softw are architecture of Path Computation Element (PCE) protocol that has proposed by Internet Engineering Task Force (IETF) to path computation. The functional blocks and Application Programming Interface (API) of the PCE protoco l implementation are also presented.

• ETRI Journal
• /
• v.38 no.1
• /
• pp.1-8
• /
• 2016

A large incoherent crosstalk (IC) caused by amplified spontaneous emission (ASE) noise power from Tx-disabled optical network units and a differential path loss has been shown to degrade upstream transmission performance in time-division multiplexing passive optical networks. This paper considers the IC-induced power penalty of an upstream signal both in an XG-PON and in a TWDM-PON. We investigate the degradation of the extinction ratio and relative intensity noise through a simulation and experiments. For the XG-PON case, we observe a 9.6 dB difference in the level of ASE noise power from Tx-disabled ONUs (hereafter known simply as ASE noise) between our result and the ITU-T XG-PON PMD recommendation. We propose an optical filtering method to mitigate an IC-induced power penalty. In the TWDM-PON case, the IC-induced power penalty is naturally negligible because the ASE noise is filtered by a wavelength multiplexer at the optical line terminal. The results provide design guidelines for the level of ASE noise in both XG-PONs and TWDM-PONs.