• 한국토양비료학회지
• /
• 제6권1호
• /
• pp.29-31
• /
• 1973

Upon the assumption that the available components in the soil evaluated by present analytical procedures, are as effective as the components applied to the soil as fertilizer, some formulas for the calculation of fertilizer requirements (F. R) for crops are suggested. Basically, the formulas are derived by combining the country average values of soil test data(${\overline{ST}}$) and of the optimum rate of fertilizers (ORF) for crops obtained from N.P.K. trials in farmer's field, as following. $$F.R(kg/10a)={\overline{ST}}(kg/10a)+ORFkg/10a-ST(kg/10a)$$ where, ST denotes the available components tested in the soil under question. Although this formula can be used both for P and K fertilizers, considering the significance of the potassium saturation rate of the soil for the availability of K, for the calculation of K fertilizer requirement, following formula is suggested. $$F.R(kg/10a)=(C.E.C.{\times}B.S.R.K.-KST(me/100g){\times}CF$$ where, B. S. R. K. is the basic potassium saturation rate of the soil and CF is conversion factor for the conversion of K me/100g into $K_2O$ kg/10a. The B. S. R. K. for different crops are obtained from the country average values of soil exchangeable K (${\overline{KST}}$), cation exchange capacity (CEC) and the optimum rates of K fertilizers for crops (ORF $K_2O$). $$B.S.R.K.=\frac{{\overline{KST}}{\times}CF+ORF(K_2O)}{CEC{\times}CF}$$ Using these formulas, equations for P and K fertilizer requirements for rice, barley, wheat, corn, italian millet, soy bean, sweet potato, potato and rape are derived.

• 응용통계연구
• /
• 제6권1호
• /
• pp.173-181
• /
• 1993

각 성분 문제에서, 표본의 크기가 상이한 경우 Dirichlet process prior에 대한 경험적 베이 즈에 대한 분포함수의 추정문제를 연구하였다. 특히, 위의 경험적 베이즈 문제에 사용할 수 있도록 Zehnwirth의 $\alpha(R)$을 수정하였다.

• 한국산학기술학회논문지
• /
• 제7권5호
• /
• pp.907-912
• /
• 2006

음성신호의 프리-엠퍼시스 과정은 고주파 영역의 약화된 성분을 보상하기 위해 사용되어진다. 프리-엠퍼시스 필터의 일반적인 형태는 y(n)=s(n)-A${\cdot}$s(n-1)이고, A 값은 유성음의 경우$0.9{\sim}1.0$ 사이의 값이다. 그리고, A 값은 프리-엠퍼시스의 기울기 값을 반영하고 기존의 방법에서는 R(1)/R(0)를 사용한다. 본 논문에서는 성문특성으로 인해 고주파 특성이 약화되는 것을 보상하기 위하여 새로운 평탄화 기법을 제안한다. 우선 신호 왜곡의 최소화를 위하여 QMF를 사용하였다. QMF를 사용한 후, 각 프레임별 자기상관계수를 사용하여 평탄화 과정을 수행하였다. 실험결과에서는 제안한 방법이 자기상관 방법보다 약화된 고주파 성분을 효과적으로 보상하는 평탄화 특성이 우수한 것으로 나타났다. 그러므로 평탄화 알고리즘은 음성 인식, 음성 분석 및 합성 등과 같은 음성 신호 처리 분야에 광범위하게 적용되어질 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.806-808
• /
• 2004

The series and parallel connection is essential for increasing power ratings of resistive type for fault current limiters. To increase voltage class, components are connected in series and to increase current level to the nominal value, they are connected in parallel. There are two ways to connect components in series and parallel. First, connected in series and then the module connects to the parallel. Second, connected in parallel and the module connects to the series. We have studied for the two ways. In this paper, we particularly investigated way to connect components in parallel first This way has the advantage of inducing effective simultaneous quench without any other devices, for example, the thing which is inducing magnetic field to the limiting and shunt resistors. And also we studied for the endurance of component which is patterned to the bi-spiral for prospective fault current. It is very important to understand this, because SFCL will use as the only device to decrease burden of circuit breaker. As experimental results, limiting component patterned to bi-spiral endures fault current up to 30kA and it works well, in parallel to series connection,

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.131-136
• /
• 2003

CF8M cast austenitic stainless steel is used for several components such as primary coolant piping, elbow, pump casing, and valve bodies in light water reactors. These components are subject to thermal aging at the reactor operating temperature. Thermal aging results in spinodal decomposition of the delta-ferrite leading to increased strength and decreased toughness. In this study, three kinds of the aged CF8M specimen were prepared using an artificially simulated aging method. The objective of this study is to summarize the method of estimating ferrite contents, Charpy impact energy and J-R curve, and to evaluate the thermal embrittlement of the CF8M cast austenitic stainless steel piping used in the domestic nuclear power plants.

• 한국세라믹학회지
• /
• 제39권6호
• /
• pp.540-549
• /
• 2002

본 실험에서는 Impedance Spectroscopy(IS)를 이용하여 플라이 애쉬, 고로 슬래그, 실리카 퓸 등의 혼합재가 치환 첨가된 포틀랜드 시멘트의 수화거동을 검토하였다. 플라이 애쉬 및 고로 슬래그가 시멘트에 치환 첨가될 경우, 수화 초기 IS 의 전기적 변수, $R_{t(s+1)}$과 $R_{t(s+1)}$의 증가폭이 감소하였다. 이것은 동일한 W/C비에서 혼합재를 포함한 시멘트의 수화가 늦게 진행되고 있음을 보여준다. 그러나, 실리카 퓸의 경우 초기에 매우 빠른 포졸란 반응성으로 인하여 플라이 애쉬 및 고로 슬래그가 첨가된 경우에 비해 큰 폭의 $R_{t(s+1)}$ 및 $R_{t(s+1)}$ 변화를 확인 할 수 있었다. OPC-플라이 애쉬계의 경우 반원과 직선 영역 사이에서 특이 할만한 평할한 곡선 영역이 출현하였으며, 수화가 진행되고 플라이 애쉬의 치환첨가량이 증가할수록 그 영역이 증가하였다.

• 폴리머
• /
• 제36권5호
• /
• pp.622-627
• /
• 2012

친환경 수성 코팅제의 물성 강화 및 VOCs의 저감 특성을 연구하기 위해서 poly(tetramethylene glycol) 2000, polycarbonate diol 2000, isophorone diisocyanate, dimethylolpropionic acid, 그리고 titanium dioxide를 사용하여 유/무기 하이브리드 수분산 폴리우레탄 코팅제를 제조하였다. R ratio([NCO]/[OH])에 따른 코팅제의 필름 물성 및 무기물의 적용으로 인한 VOCs의 저감 특성에 대해서 연구한 결과 R ratio가 1.5 이상인 경우에서 코팅제로 적합함을 확인하였으며 이는 하드 세그먼트의 영향으로 여겨지며 $TiO_2$의 적용으로 코팅 후 VOCs의 저감 특성을 확인하였다.

• 기술혁신연구
• /
• 제11권2호
• /
• pp.151-173
• /
• 2003

This paper analyses the efficiency and productivity of R&D system across time (1991${\sim}$2000) and 16 OECD countries using multi-output and multi-input non-parametric frontier methods such as DEA (data envelopement analysis) and Malmquist productivity indexes. Malmquist productivity indexes are decomposed into two components measures, namely technical change and efficiency change. To calculate R&D efficiency and productivity, we used R&D stock and the number or researchers as R&D input proxies and the number of adjusted SCI papers and U.S. patent applications as R&D output proxies. Empirical result shows that Switzerland, Canada, U.S., Australia's R&D efficiencies are the highest and Korea's R&D productivity growth is the highest in the sample for the period. Technical efficiency growth was a more important source of productivity growth than technological innovation.

• Progress in Superconductivity
• /
• 제5권2호
• /
• pp.136-140
• /
• 2004

We fabricated and tested a resistive superconducting fault current limiters (SFCL) operated at 3.8 ㎸ based on YBCO thin films. The SFCL was composed of 7 components connected in series. Each component was designed to be capable of current limiting at 600 V, and has a SiC shunt resistor ( $R_{s}$) of 40 Ω in Parallel. Short circuit tests were carried out fur 0 and 90 degree faults lasting fur 5 cycles. The test results showed that the 7 components were quenched simultaneously under the safe quenches and evenly shared the applied voltage. The SFCL successfully suppressed the fault currents below 94 $A_{peak}$ within the quarter cycle after fault.t.t.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.571-576
• /
• 2002

Electromagnetic analysis has been made for the design of 3 MJ Compulsator (Compensated Pulsed Alternator, CPA) that will be used as the power supply system of the electrothermal-chemical launcher system. using finite element method with ANSYS/Emag. From the analysis results, it was possible to decide the excitation MMF and the rotor/stator size to obtain the desired output current. And using electromagnetic forces from the analysis results. the stresses on the components of 3 MJ CPA could be analyzed. The detailed design based on the analysis results has been made and the fabrication of 3 MJ CPA is in progress. Before assembling components into 3 MJ CPA. an experiment is being made to check the correspondence between analysis results and measurements.