• Clinical and Experimental Pediatrics
• /
• v.52 no.2
• /
• pp.205-212
• /
• 2009

Purpose : Chronic urticaria is a disorder characterized by the appearance of wheals for more than 6 weeks; in most cases, the etiology is unknown. This study was aimed to discover the clinical aspects, the etiologic factors, and the course of chronic urticaria. Methods : 51 children who were diagnosed with chronic urticaria in the past 4 years, and who had had follow-ups more than 6 months after diagnosis in the pediatric department of Soonchunhyang University Hospital in Bucheon, were enrolled in the study. The laboratory findings, clinical aspects, and courses were retrospectively investigated by medical record review and telephone interview. Results : The median age of children with chronic urticaria was 4 years (8 months to 16 years) and the ratio of male to female was 1.4:1. Of the total, 39.2% of patients had a history of atopy. Angioedema occurred concurrently with urticaria in 11.8% of patients, and dermographism was seen in 41.2%. Results of thyroid function tests were normal and thyroid autoantibodies were absent in all cases. Regarding etiology, most cases (74.5%) were forms of idiopathic urticaria. Urticaria was induced by physical factors in 19.6% of patients. Open challenge tests revealed that 3 patients were allergic to food additives (glutamate 2, glutamate, and sulfite 1). In this study, most of the patients reported good response after medication of 1st- or 2nd-generation antihistamines alone. Follow-up at 6 months revealed that 70.6% of patients had experienced remission, and 84.8% of children who had follow-up at 1 year presented remission. Conclusion : Chronic urticaria in most patients was idiopathic. Remission occurred within 1 year of diagnosis, in most cases so chronic urticaria in children seems to have good prognosis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.3
• /
• pp.343-352
• /
• 1998

The relationship between summer hypoxia in bottom water layer and benthic community structure was discussed at forty sampling stations in semi-enclosed Youngsan River estuarine bay, Korea. The oxygen deficient layer less than $2.0 mg/\ell$ was widely developed in the inner estuarine stations in summer due to the summer stratification. A total of 141 species was occurred, with a mean density of $1,923 ind./m^2$ and biomass of $79.44\;g/m^2$ in summer season. The species number was significantly increased with the increment of the bottom dissolved oxygen, whereas density and biomass were partially correlated within the low oxygen level of $2.0\;mg/\ell$. These results imply that benthic community structures are affected by bottom oxygen depletion in summer. Cluster analysis showed that the benthic community could be classified into three station groups. These station groups from the species composition coincided with the groups based on the environmental factors. This fact suggests that the overall spatial distribution of macrozoobenthos in Youngsan River estuarine bay in summer should be controlled by the summer hypoxia and clay content of the area. Group-I was located the innermost estunrine bay from Mokpo Harbour to near the dike, where summer hypoxia was developed and one bivalve Theora fragilis, two polychaetes, Tharyx sp. and Lumbrineris longifolia were dominated. Group-II, the central transitory area of the estuarine bay between two another stational groups, where two bivalves Theora fragilis, Raetellops pulchella and a polychaete Tharyx sp. predominated with relatively low density compared to that of Group-I. Group-III, the mouth part of the estunrine bay exposed to the open sea, where a polychaetes Poecilochaetus johnsoni and a bivalve Yoldia Johanni predominated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2607-2616
• /
• 2012

This study was designed to figure out patient safety culture of medical institutions and try to utilize the study results as basic data for analyzing doctor's awareness of patient safety culture. To this end, questionnaire survey was conducted from August 1st to September 5th, 2011, targeting doctors working at senior general hospitals located in G city, and 194 questionnaires were utilized for final analysis. The research results are as follows. First, there was a difference in awareness of deployment of staffs depending on gender, age, term of service in the hospital, contact with patients and working hours per week in relationship between subjects, wards and hospital safety culture, and organizational learning and teamwork in the ward turned out to be significant in accordance with working hours per week, and all sub-areas of the ward safety culture by departments. Second, feedback about the malpractice, communication, report on malpractice frequency and overall safety awareness were found to be significant by departments in relationship of subjects, medical incident reporting system, patient safety evaluation and overall level of consciousness, and the overall safety awareness showed significant results according to contact with patients and working hours per week. Third, there was a positive corelation in sub-areas of the ward and hospital safety culture awareness, overall recognition and patient safety evaluation, and a positive corelation with medical incident reporting system was found in all areas except for attitude of managers/immediate supervisors and that of hospital executives. Fourth, sub-areas of patient safety culture which has a effect on patient safety showed significant results in organizational learning, openness of communication, overall safety awareness, systematic cooperation between departments, feedback/communication and non-punitive response. In conclusion, to increase the level of the ward and hospital patient safety culture of doctors and implement medical incident reporting system faithfully, it is necessary to activate teamwork through organizational learning in the ward based on the adequate staffing and working hours, promote open communication between departments and provide feedback on medical malpractice, thereby establishing a cooperative system by departments and active support of hospital executives for patient safet.

• Tuberculosis and Respiratory Diseases
• /
• v.39 no.3
• /
• pp.219-227
• /
• 1992

Background: Acute and chronic airway inflammation are important in the pathogenesis of bronchial asthma. Corticosteroids have proved to be very effective in the management of asthma. Although the mechanism by which they produce this effect is still debated, suppression of the inflammatory response is thought to be the most likely. Although inhaled steroids are known to be safe and have less side effects than oral steroids, the extent which inhaled steroids have beneficial and the detrimental effects in the treatment of asthma has remained open to question. Budesonide is a recently developed corticosteroid for inhalation treatment with a strong local effect combined with rapid inactivation in the systemic circulation. We set out to look in more detail at the time course of change in bronchial reactivity, clinical symptoms and the effects on the adrenal function during 6 weeks of treatment with budesonide (800 ug per day). Methods: Clinical symptoms, pulmonary function test, histamine $PC_{20}$, serum ACTH and cortisol (8 AM and 4 PM) were measured in 23 allergic asthmatic patients before and after 6 weeks of treatment with budesonide. Results: 1) Pulmonary function test; PEFR, FEV1 and FVC after 6 weeks of treatment with budesonide were higher than those before treatment. 2) Clinical symptoms; Clinical symptoms were significantly improved after 3 weeks and 6 weeks of treatment with budesonide. 3) Histamine provocation; Histamine $PC_{20}$ after 6 weeks of treatment with budesonide was significantly higher than that before treatment. 4) Adrenal function; 6 weeks of budesonide therapy did not significantly affect the level of serum ACTH and cortisol. Conclusion: From these results, it is concluded that budesonide therapy improved the clinical symptoms, pulmonary function and bronchial hyperreactivity after 3 weeks of treatment and the improvement after 6 weeks of treatment was higher than that after 3 weeks of treatment. During 6 weeks of treatment with budesonide, the inhibitory effect on the adrenal function was not obvious.

• Tuberculosis and Respiratory Diseases
• /
• v.41 no.4
• /
• pp.354-362
• /
• 1994

Objectives and Methods : The presence of aneuploidy or high proliferative activity in cytologic specimens is considered as complementary for the diagnosis of malignancy. To evaluate the diagnostic usefulness of DNA ploidy and cell cycle analysis in lung cancer, we compared the diagnostic yielding rates of DNA ploidy test by brushing specimens using flow cytometry with bronchoscopic forceps biopsy and brushing cytology. Results : Of the seventy-six cases, 55 cases proved to have malignant diseases(squamous cell cancer: 27, adenocarcinoma: 7, large cell cancer: 1, undifferentiated: 4 and small cell cancer: 16). The incidence of aneuploidy in lung cancer patients was 32.7%(18/55), as opposed to no cases in benign disease. And the proportion of high proliferative activity(S+G2M>22%) in lung cancer patients was 42.9%(15/35), but none in benign diseases. In fifty-six of 75 cases(74.7%), cytology of brushing specimens and DNA analysis(either aneuploidy or high proliferative activity vs. diploidy and low proliferative activity) were in concordance. The sensitivity with only brushing cytology was 41.8%(23/55), but with the addition of DNA analysis, it was increased to 56.4%(31/55), without decreasing the specificity(100%). And there was a case whose clue for malignancy was absent except aneuploidy, and he was confirmed to have squamous cell cancer following open thoracotomy. There were no differences in the frequency of aneuploidy or high proliferative activity between histologic subtypes of bronchogenic malignancy. Conclusions : The diagnostic detection rate of lung cancer was improved with the addition of DNA ploidy and cell cycle analysis, and the presence of aneuploidy or high proliferative activity was a relatively specific indicator of malignant disease. It would be useful to test DNA ploidy and cell cycle analysis with brushing specimen for the diagnosis of bronchogenic malignancy particularly in patients whose biopsy specimen could not be obtainable.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.611-631
• /
• 2017

At first there was practice, then festivals and theory followed. Compared to the animation production, which is older then the medium film itself, festivals and theory in this area started with a delay. While animation programs where shown in film festivals like Cannes since the mid 1940s, the first animation festival in Annecy, France was founded in 1960, followed by several short-lived events in Romania, Italy and Tokyo and finally in 1972 by the second oldest festival up to date, Animafest Zagreb. Animation theory evolved in the late 1980s in the Anglo-American area with associations like the Society for Animation Studies, following its 'big sister' film studies. Expanding ever since as a research area, European animation studies in e.g. France, German speaking countries, Poland or Croatia have been catching up in recent years by organizing theoretical conferences and publications. A vivid synergy between practice, festivals and theory has always been a key factor for establishing a platform for the art form and culture of animation. However, in the past few years a trend could be observed towards a more intense interaction between animation festivals and theory. Animation festivals are hosting theoretical and scientific symposia or conferences, which are open for artist positions and insights into the industry. At the beginning of the lecture a short reflection of the concept of Animafest Scanner itself is followed by an introduction of the Symposium Expanded Animation at the media festival Ars Electronica Linz. The talk will subsequently focus on the multilayered academic symposia at the Festival of Animated Film ITFS and the International Conference on Animation, Effects, VR, Games and Transmedia in Stuttgart. These case studies will reveal the blurring boundaries between art, science, theory and industry as well as the specificities of the interplay between artists, practitioners, scholars, curators and festival visitors in different formats.

• Economic and Environmental Geology
• /
• v.51 no.4
• /
• pp.345-358
• /
• 2018

In this study, we have performed electron probe micro analyzer (EPMA), X-ray differaction (XRD), inductively coupled plasma spectroscopy (ICP), Fourier transform Raman spectroscopy (FT-Raman), far-infrared (FIR), nuclear magnetic resonance (NMR), and pH-DO Analyses for characterizing medicinal mineralogy aspect of the black tourmaline (Shantung, china), black and pink tourmaline (Minas Geraris, Brazil), black touemaline (Daeyu mine, Korea). In addition, heating effects of the tourmaline sauna as well as the effects of tourmaline powder-added soap on skin troubles have been investigated. It has been revealed that chemical composition of the tourmaline is either high in Fe-, Al-, B-rich types. Ratio of the K-Ca, Na-K, and Fe-B reflects the component change property of solid solution. $CaO/CaO+Na_2O$ and MgO/FeO+MgO ratio show high positive correlation. When tourmaline reacts with distilled water, extended reaction time DO values approximately decrease and it stabilizes at DO = 10. Otherwise, pH values increase until 6 hours and it stabilizes at pH = 8 after 24 hours. Distilled water changes to alkaline when it reacts with tourmaline powder and particles. Tourmaline showed lower absorption spectrum strength and transmittance at short wave, where absorption spectrum wavelength and strength were determined by the content of the composition elements and characteristics of crystallography. Increase of the Fe content has been confirmed to be the cause for the reduction of irradiation. For the chemical composition and spectral property of the tourmaline particle samples, it has been found that Si and Fe contents show positive correlation with Far-Infrared irradiation, while Al and Mg contents show negative correlation. For tourmaline powder, it has been confirmed that $^{17}O-NMR$ FWHM (full width at half maximum) decreases when reacts with distilled water. Tourmaline sauna (approximately $100^{\circ}C$) was found to increase $0.5-1.5^{\circ}C$ of body temperature, average of 12 heartbeat, and 10mg Hg of blood pressure. Tourmaline soap had very good aesthetic effect to skin and was confirmed to have above the average improvements to skin troubles (e.g., allergy or atopy).

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Korean journal of applied entomology
• /
• v.47 no.2
• /
• pp.155-162
• /
• 2008

The Welsh onion beet armyworm, Spodoptera exigua (Hubner), has attacked Welsh onion and is now the most important pest of Welsh onion in southwestern Korea. The beet armyworm has a wide host range, occurring as a serious pest of vegetable and fields. The relatively high abundance of beet armyworm has stimulated frequent application of insecticides to foliage. Insecticide resistance is a major problem in management of this insect. Accordingly, pesticide application for the control of beet armyworm was tried in both the open field and in laboratory, using 4 synthetic compounds such as metaflumizone and chlorfenapyr, indoxacarb, flufenoxuron, emamectin benzoate. In the laboratory, each developmental stages from eggs, larva to pupa was tested against 4 insecticides. Against the eggs of welsh onion beet armyworm, there was no significantly different with each other. These tested chemicals no killing effect to eggs. However, the population of 1st larva hatched from eggs were reduced because they eaten the egg shell with residual insecticides. The tested insecticides were taken very high mortalities to 1st to 3rd larva of Welsh onion beet armyworm. Otherwise, there were decreased the death rate from 4th to 6th larva. On the other hand, their value of control effects were relatively good against Welsh onion beet armyworms in the field between 87.2 and 90.5% on 10 days after insecticide application.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.