• 한국염색가공학회지
• /
• 제26권3호
• /
• pp.263-271
• /
• 2014

The purpose of this study is to investigate the dyeability of silk fabrics with Humulus japonicus (Hwansam) extract which is a kind of weeds that grows wild in the suburbs. In the research, the general extract method was conducted with the extract from fresh herb of root-removed Humulus japonicus while we investigated the optimal dyeing conditions and dyeability depending on the changes of the kind of mordants, methods and temperature. The functional properties such as antibacterial activities, deodorization and UV protection were also reviewed. The ideal output, as a result, was shown at 100% of dye concentration, $90^{\circ}C$ of dyeing temperature and 40 minutes of dyeing time while in terms of dye uptake depending on the kind of mordants and methods, it was found that among four mordants of $SnCl_2$, $AlK(SO_4)_2$, $CuSO_4$, and $FeSO_4$ post-mordanting with $FeSO_4$ showed the best result. Color fastness to washing, dry cleaning and rubbing was found strong at grade 4-5 and the grade to light was as good as 3 while to perspiration was good at 4-5 as well. In aspects of functional properties, it showed excellent results of 99% deodorization rate, 98% UV protection rate and 99.9% bacterial reduction against Staphylococcus aureus.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.55-59
• /
• 2009

The epoxy resin without hardener can harden by a ring-opening reaction in the presence of the alkalies produced by the hydration of cement in epoxy-modified mortars and concretes. This paper investigates the effect of curing conditions on the strength improvement of polymer-modified mortars using bisphenol A-type epoxy resin without hardener. The polymer-modified mortars using epoxy resin are prepared with various polymer-cement ratios, and subjected to ideal, water, dry and heat cures. In the heat cure, the epoxy-modified mortars are sealed or unsealed with a PVDC (polyvinylidene chloride) film. The epoxy-modified mortars are tested for flexural and compressive strengths at desired curing methods. The microstructures of the epoxy-modified mortars are also observed by scanning electron microscope. The effects of curing conditions on the strength development of the epoxy-modified mortars are examined. From the test results, the marked effectiveness of the heat cure under the PVDC film sealing against the development of the strength of the epoxy-modified mortar without the hardener is recognized. The flexural and compressive strengths of 7-day-90℃ heat-cured, PVDC film-sealed epoxy-modified mortars without hardener reach 7 to 17MPa and 24 to 44MPa respectively, and are two to three times of Unmodified mortar. Such high strength development of the epoxy-modified mortars may be achieved by the dense microstructure formation by cement hydrates and the hardening of the epoxy resin in the mortars.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.27-30
• /
• 1999

Poly(phenylene oxide)s were used to prepare flat, integrally skinned self-supporthed asymmetric membranes by dry-wet phase separption. The intrinsic ideal gas selectivity of poly- (2,6-dimethy-1,4-phenylene oxide) (PMPO) was retained in the membranes, and improved by a coating with silicone rubber. Polymers of the same class were coated of UF supports with a silicon rubber gutter layer, yielding composite membranes with high flux but lower selectivity. The effect of th glutaraldehyde cross-linking of sodium alginate (SA) membranes on the mobility of water and ethanol has been studied with pfg nmr. Crosslinking reduces water self-diffusion, and does not seem to be stable on the timescale of weeks.

• Environmental Engineering Research
• /
• 제23권4호
• /
• pp.449-455
• /
• 2018

In this study, the contribution of hot biomass ash to enrichment of the mineral content and to reducing the moisture content of broiler poultry manure was investigated. For this purpose, the mixtures have been prepared by adding biomass ash at varying rates (10%, 20%, 30%, 40% and 50%) and at different temperatures ($100^{\circ}C$, $150^{\circ}C$, $200^{\circ}C$ and $250^{\circ}C$) according to the dry matter content (74.77%) of the poultry manure. The results showed that incorporation of biomass ash into poultry manure at 50% at $250^{\circ}C$ reduced the moisture content from 25.23% to 9.82%. Regarding the maximum N in the final product, the ideal temperature of biomass ash has been obtained at $150^{\circ}C$. The highest nutrient contents were obtained at 50% biomass ash incorporation. The highest dose of biomass ash application had significantly increased nutrients, such as Ca (19.34%), K (4.03%), Fe (1,545 mg/kg), Mn (812 mg/kg) and Zn (479 mg/kg) in the final organomineral fertiliser formulation. Overall, it was concluded that the addition of hot biomass ash can dramatically decrease the moisture content of poultry manure and therefore provide odour and pathogen removal and increase its plant nutrient content.

• Coupled systems mechanics
• /
• 제12권2호
• /
• pp.127-149
• /
• 2023

A theoretical method is developed to analyze the free vibration of an elastic annular plate in contact with an ideal liquid. The displacement potential functions of the contained liquid are expressed as a combination of the Bessel functions that satisfy the Laplace equation and the liquid boundary conditions. The compatibility condition along the interface between the annular plate and the contained liquid is taken into account to consider the fluid-structure coupling. The dynamic displacement of the wet annular plate is assumed to be a combination of dry eigenfunctions, allowing for prediction of the natural frequencies using the Rayleigh-Ritz method. The study investigates the effect of radial liquid boundary conditions on the natural frequencies of the wet annular plate, considering four types of liquid bounding: outer container bounded, outer and inner bounded, inner bounded, and radially unbounded. The proposed theoretical method is validated by comparing the predicted wet natural frequencies with those obtained from finite element analysis, showing excellent accuracy. The results indicate that the radial liquid bounding effect on the natural frequencies is negligible for the axisymmetric vibrational mode, but relatively significant for the mode with one nodal diameter (n =1) and no nodal circle (m' = 0). Furthermore, the study reveals that the wet natural frequencies are the largest for the plate with an inner bounded cylinder among the radial liquid boundary cases, regardless of the vibration mode.

• 한국초지조사료학회지
• /
• 제41권4호
• /
• pp.223-233
• /
• 2021

본 연구는 객토를 한 간척지에서 석고시용 수준이 알팔파의 수량과 사료성분에 미치는 영향을 알아보고자 수행하였다. 실험장소는 간척한지 17~33년 경과된 석문간척지로서 약 70 cm 정도 객토한 토양이었다. 객토에 사용한 흙은 섬토양의 제염을 하지 않은 것 이었다. 처리는 석고를 시용하지 않은 0 ton/ha 구(G0), 석고를 2 ton/ha(G2) 및 4 ton/ha(G4) 시용한 구로 하였다. 수확은 알팔파가 개화초기(개화 10%)에 도달할 때 1차 수확하였으며 이후 수확은 약 35일 간격으로 수확을 하였다. 알팔파의 건물수량은 1차 년도는 G2가 G0와 G4보다 유의적으로 높았으며 2차 년도는 처리간 유의적인 차이는 없었으나 G2가 G0와 G4보다 높은 경향을 보였다. G2에서 알팔파의 건물수량이 높은 이유는 토양의 pH 및 EC가 각각 재배가능 및 재배적합 수준이었고 피복도 및 알팔파 식생비율도 높은 것에 기인하였다. 1차 및 2차 년도 모두 석고 처리 간 CP, NDF 및 ADF 함량 및 RFV는 차이가 없었다. 한편 1차 및 2차 년도의 연구결과를 통해서 알팔파 건물수량에 부정적인 영향을 주는 요인은 봄의 가뭄과 여름의 집중된 강수로 나타났다. 이상으로부터 객토 간척지에서 석고 처리는 알팔파의 건물수량을 높이는데 효과적인 것으로 판단되며 2 ton/ha이 적정 수준인 것으로 사료된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권6호
• /
• pp.816-824
• /
• 2006

This study was conducted to evaluate the shoot height at which the yield and nutritive value of wormwood (Artemisia montana) is optimized in order to provide information on its potential to support animal production (Experiment 1). A second objective was to determine how the essential oil (EO) concentration in wormwood hay and silage differ (Experiment 2). In Experiment 1, Artemisia montana was harvested at five different shoot heights (20, 40, 60, 80 and 100 cm) from triplicate $1.8{\times}1.8m$ plots. Dry matter (DM) yield was measured at each harvest date and the harvested wormwood was botanically separated into leaf, stalk and whole plant fractions and analyzed for chemical composition and in vitro dry matter digestibility (DMD). Values for total digestible nutrients (TDN), digestible energy (DE) and metabolizable energy (ME) were subsequently calculated using prediction equations. Dry matter yields of stalk and whole plant increased linearly (p<0.001) and leaf yield increased quadratically (p<0.01) with shoot height, whereas the leaf/stalk ratio decreased linearly (p<0.001). As shoot height increased, there was a linear increase (p<0.001) in leaf DM, ether extract (EE) and neutral detergent fiber (NDF) contents and a quadratic increase (p<0.05) in leaf acid detergent fiber (ADF) and nitrogen free extract (NFE) contents, and stalk and whole plant DM (p<0.001), organic matter (OM, p<0.01 and p<0.05), NDF (p<0.001 and 0.05) and NFE (p<0.05) contents. However, there were decreases in leaf crude protein content (CP, quadratic, p<0.001) and stalk and whole plant EE content (linear, p<0.001), CP (quadratic, p<0.05) and ash (quadratic, p<0.05) contents. Digestibility of DM and TDN, and DE and ME value in leaves were not affected by increasing shoot height, but these measures linearly decreased (p<0.001) in stalk and whole plant. In Experiment 2, the hay had higher DM and CP concentrations, but lower EE concentration than the silage. Essential oil (EO) content in wormwood silage (0.49 g/100 g DM) was higher (p<0.05) than that in wormwood hay (0.32 g/100 g DM). Wormwood hay contained 25 essentail oils (EO) including camphor (10.4 g/100 g), 1-borneol (11.6 g/100 g) and caryophyllene oxide (27.7 g/100 g), and wormwood silage had 26 EO constituents including 3-cyclohexen-1-ol (8.1 g/100 g), trans-caryophyllene (8.6 g/100 g) and ${\gamma}$-selinene (16.8 g/100 g). It is concluded that the most ideal shoot height for harvesting wormwood is 60 cm based on the optimization of DM yield and nutritive value. Wormwood silage had a greater quantity and array of EO than wormwood hay.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1512-1512
• /
• 2001

The University of Cordoba conducts since 1991 a breeding program to obtain new olive cultivars from intraspecific crosses. The objective is to obtain new early bearing and high-quality cultivars. In plant breeding, many seedlings must be tested to increased the chance of getting desirable genotypes. Therefore, fast, cheap and accurate methods of analysis are necessary. The conventional laboratory techniques are costly and time-consuming. Near Infrared Spectroscopy (NIRS) can satisfy the characteristics requested by plant breeders and offers many advantages such as the simultaneous analysis of many traits and cheap cost. The objective of this work was to asses the performance of NIRS to estimate oil fruit components (fruit weight, flesh moisture, flesh/stone ratio and oil flesh content in dry weight basis) and fatty acid composition in olive fruit. Genotypes from reciprocal crosses between ‘Arbequina’, ‘Frantoio’ and ‘Picual’ cultivars have been used in this study. A total of 287 samples, each from a single plant, were scanned using a DA-7000 Diode Array VIS/NIR Analysis System (Perten Instruments), which covers the visible and NIR range from 400-1700 nm. All samples were analysed for fatty acid composition (gas chromatography) and 220 for oil fruit components (oil content by nuclear magnetic resonance), 70% and 30% of samples were randomly assign for the calibration and validation sets respectively. The preliminary results shows that calibration for palmitic, oleic and linoleic acids were highly accurate with calibration and validation values of $r^2$ from 0.85 to 0.95 and 0.76 to 0.91 respectively. Calibration for palmitoleic and estearic acids were less accurate, probably because of the narrow range of variability available for these fatty acids. For the oil fruit components, calibration were high accurate for flesh moisture and oil flesh content in dry weight basis ($r^2$ higher than 0.90 in both calibration and validation sets) and less accurate for the other characteristics evaluated. The first results obtained indicate that NIRS analysis could be an ideal technique to reduce the cost, time and chemical wasted necessary to evaluate a large number of genotypes and it is accurate enough to use for pre-selecting genotypes in a breeding program.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.325-325
• /
• 2017

In the 20th century, the average temperature of Korea has risen by $1.5^{\circ}C$, whereas it has risen by $0.6^{\circ}C$ globally. Few studies have investigated the effect of seeding date in hilly pastures on their growth characteristics and productivity. The purpose of this study was to elucidate the effect of seeding dates at a hilly pasture establishment on its growth characteristics and productivity caused by increasing temperatures in Korea. The experiments were conducted from 2014 to 2016 at Pyeongchang, South Korea, at an altitude 600-700 m above sea level. The composition of grass mixture was tall fescue, orchard grass, perennial ryegrass, Kentucky bluegrass, timothy, and white clover. Treatments comprised four seeding dates (August 13 and 27, and September 10 and 24). The establishment rate was lowest on September 24, resulting in only 20% establishment over the winter, and the proportion of weeds was highest on September 24 (58%). Early seedling growth before overwintering is a critical approach to ensure successful establishment of grassland. The main components were orchard grass and tall fescue on the early seeding date (August 13), and Kentucky bluegrass on the late seeding date (September 24). Late seeding increased the proportion of bare lands invaded by weed species, especially during second and third cutting periods. Early seeding date resulted in a progressive increase in biomass. Total annual production was significantly affected by the seeding date; lowest dry matter production was on September 24 ($2,441kg\;ha^{-1}$), whereas maximum dry matter yield was on August 27 ($6,608kg\;ha^{-1}$). The results of the study indicate that growth condition and productivity could be increased by early seeding, and seeding of grass in the Pyeongchang area should be completed before August 27. However, further studies are needed to determine the ideal seeding date at the hilly pasture establishment in Pyeongchang.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권6호
• /
• pp.796-806
• /
• 2015

To evaluate the effects of feeding linseed oil or/and sunflower oil mixed with fish oil on milk yield, milk composition and fatty acid (FA) profiles of dairy cows fed a high-concentrate diet, 24 crossbred primiparous lactating dairy cows in early lactation were assigned to a completely randomized design experiment. All cows were fed a high-concentrate basal diet and 0.38 kg dry matter (DM) molasses per day. Treatments were composed of a basal diet without oil supplement (Control), or diets of (DM basis) 3% linseed and fish oils (1:1, w/w, LSO-FO), or 3% sunflower and fish oils (1:1, w/w, SFO-FO), or 3% mixture (1:1:1, w/w) of linseed, sunflower, and fish oils (MIX-O). The animals fed SFO-FO had a 13.12% decrease in total dry matter intake compared with the control diet (p<0.05). No significant change was detected for milk yield; however, the animals fed the diet supplemented with SFO-FO showed a depressed milk fat yield and concentration by 35.42% and 27.20%, respectively, compared to those fed the control diet (p<0.05). Milk c9, t11-conjugated linoleic acid (CLA) proportion increased by 198.11% in the LSO-FO group relative to the control group (p<0.01). Milk C18:3n-3 (ALA) proportion was enhanced by 227.27% supplementing with LSO-FO relative to the control group (p<0.01). The proportions of milk docosahexaenoic acid (DHA) were significantly increased (p<0.01) in the cows fed LSO-FO (0.38%) and MIX-O (0.23%) compared to the control group (0.01%). Dietary inclusion of LSO-FO mainly increased milk c9, t11-CLA, ALA, DHA, and n-3 polyunsaturated fatty acids (PUFA), whereas feeding MIX-O improved preformed FA and unsaturated fatty acids (UFA). While the lowest n-6/n-3 ratio was found in the LSO-FO, the decreased atherogenecity index (AI) and thrombogenicity index (TI) seemed to be more extent in the MIX-O. Therefore, to maximize milk c9, t11-CLA, ALA, DHA, and n-3 PUFA and to minimize milk n-6/n-3 ratio, AI and TI, an ideal supplement would appear to be either LSO-FO or MIX-O.