• Journal of Plant Biology
• /
• 제11권1호
• /
• pp.22-26
• /
• 1968

Hypocotyl segments of shade-grown soybean sprouts(var. Kumdo) were floated in solutions of various substances at physiological levels and grown for either 24 hours at 28$^{\circ}C$ or 72 hours at $25^{\circ}C$. Increased length of the segments beyond 20mm (the original length) was obtained as a measure of the present studies. At the room temperature, Ca and DNP strongly inhibited elongation of the hypocotyl segments, whereas K, IAA, GA and EDTA in general promoted it. There were, however, no such differences in the effects at relatiely low temperature. This indicated that the elongation process not only involves stretching of wall materials, but also does synthesis of the materials. Ca was found to be antagonistic to the promotive action of GA in the elongation, and the IAA action involves metabolic energy. EDTA seemed to act as a widely known chelator removing Ca already existed in the hypocotyl tissue, thus shwoed a promotion in the elongation.

• 한국작물학회지
• /
• 제41권6호
• /
• pp.634-639
• /
• 1996

근래에 육성된 한국산 녹두품종에 대하여 용도상 분류 기준이 되는 하배축신장성과 주요 성분함량을 조사하여 품종 육성의 기초 자료로 활용하고자 수행하였던 바 그 결과를 요약하면 다음과 같다. 1. 하배축 신장성이 큰 품종은 4234-697과 금성녹두였으며 남평녹두는 중간정도, 선화녹두는 작았다. 2. 파종 후 치상온도가 높을수록 하배축 신장은 양호하였는데 고온에서는 파종직 후부터 급속한 신장을 나타냈다. 3. 냉장고에 저장한 종자의 하배축신장성은 상온에 저장한 종자보다 하배축신장성이 양호하였다. 4. 종자크기와 하배축신장성과는 품증에 따라 각각 다른 상관정도를 보였으나 유의성은 인정되지 않았다.

• BMB Reports
• /
• 제33권2호
• /
• pp.103-111
• /
• 2000

Phosphorylation of the eukaryotic elongation factor 2 (eEF-2) blocks the elongation step of translation and stops overall protein synthesis. Although the overall rate of protein synthesis in mitosis reduces to 20% of that in S phase, it is unclear how the protein translation procedure is regulated during the cell cycle, especially in the stage of peptide elongation. To delineate the regulation of the elongation step through eEF-2 function, the changes in phosphorylation of eEF-2, and in activity of corresponding $Ca^{2+}$/calmodulin (CaM)-dependent protein kinase III (CaMK-III) during the cell cycle of NIH 3T3 cells, were determined. The in vivo level of phosphorylated eEF-2 showed an 80% and 40% increase in the cells arrested at G1 and M, respectively. The activity of CaMK-III also changed in a similar pattern, more than a 2-fold increase when arrested at G1 and M. The activity change of the kinase during one turn of the cell cycle also demonstrated the activation at G1 and M phases. The activity change of cAMP-dependent protein kinase (PKA) was reciprocal to that of CaMK-III. These results indicated: (1) the activity of CaMK-III was cell cycle-dependent and (2) the level of eEF-2 phosphorylation followed the kinase activity change. Therefore, the elongation step of protein synthesis might be cell cycle dependently regulated.

• 열처리공학회지
• /
• 제3권2호
• /
• pp.20-31
• /
• 1990

This investigation has been carried out to make clear the effect of deformation temperature, strain rate and grain size on the tensile properties of 304L stainless steel. Tensile properties of the metastable austenitic 304L steel remarkably influenced by deformation temperature. Tensile strength increased with decreasing deformation temperature and the elongation showed maximum value near $40^{\circ}C$. In order to obtain the high elongation, a large amount of deformation is available in austenite before martensitic transformation and the martensite has to be induced gradually. Tensile strength and elongation increased with decreasing grain size. The temperature representing the maximum elongation shifted to low temperature and the peak width of elongation became broaden with decreasing austenite grain size. The volume fraction of strain induced martensite decreased with decreasing austenite grain size. As the strain rate increase, the temperature representing the maximum elongation value shifted to high temperature and volume fraction of strain induced martensite decreased.

• 패션비즈니스
• /
• 제17권2호
• /
• pp.179-196
• /
• 2013

This research is about the mechanical properties of knit pullover of Shaping and WholeGarment according to structured patterns and form of the armhole. For the study 12 samples are prepared under different conditions and through comparative analysis of each sample's armhole around armpit in basic properties, tensile strength & elongation and residual elongation after repeated extensions, the conclusion is as follows. As a result of comparing basic properties of structured pattern of Shaping and WholeGarment samples, in all structured patterns Shaping samples weighed more. According to the comparative analysis of tensile strength & elongation of Shaping and WholeGarment samples, Machi on both sides of WholeGarment samples showed the highest strength. By comparing outcome of residual elongation by structured pattern of Shaping and WholeGarment samples, both types were observed to have the residual elongation increase in the order of Plain

• 접착 및 계면
• /
• 제25권1호
• /
• pp.162-168
• /
• 2024

The effect of maleinized polybutadiene (MPB) on the mechanical properties of epoxy resins including adhesion strength, elongation and impact peel resistance was investigated in this study, in which MPB is an anhydride-functionalized polybutadiene prepolymer. Different molecular weights (3.1K and 5.6K) of MPB were added to diglycidyl ether bisphenol-A (DEGBA), an epoxy resin, to increase its impact peel strength and elongation. At various loading percent (5, 10, 15, 20 and 25 wt%) of MPB in the epoxy resin, significant improvements of mechanical properties were observed. According to the comparative analysis results, the modified epoxy system with 15 wt% (3.1K) MPB exhibited the highest lap shear strength, about 40% higher than that of neat epoxy. The tensile strength and elongation steadily and simultaneously increased as the loading percent of MPB increased. The impact peel strengths at low (-40℃) and room (23℃) temperatures were substantially improved by MPB incorporation into epoxy resins. Reactive and flexible MPB prepolymer seems to construct strong nano-structured networks with rigid epoxy backbones without sacrificing the tensile and adhesion strengths while increasing impact resistance/toughness and elongation properties. For higher impact peel while maintaining adhesion and tensile strengths, approximately 10-15 wt% MPB loading in epoxy resin was suggested. Consequently, incorporation of functionalized MPB prepolymer into epoxy system is an easy and efficient way for improving some crucial mechanical properties of epoxy resins.

• 한국의류산업학회지
• /
• 제4권3호
• /
• pp.261-265
• /
• 2002

To propose a basic material that can improve the crumples in the knee area and can be applied as an element of garment design, the present study examined the elongation rates of the samples by differentiating the number of cutting lines according to the direction of the fabric, and then determined the puckering phenomenon by judging the conditions of the seams based on the looks of seam lines after bi-axil elongation. After the subjective evaluation on the knee areas of both the standard and modified trousers, the following conclusion was drawn : The elongation rates of the samples are: warp (3.98%)cross-legged (-0.2)>squatting down (-0.4); those in the modified trousers feel more comfortable when sitting on a chair (0.2)>cross-legged (0)>squatting down (-0.6). In the cross-legged posture, the modified trousers (0) has higher scores in the subjective evaluation than the standard ones (-0.2). The evaluation on the looks of needleworks in the samples with cutting lines along the direction of the fabric: weft2 (5.0)

• 한국작물학회지
• /
• 제51권4호
• /
• pp.287-294
• /
• 2006

Germination and early elongation of rice after germination were investigated in anoxic air treatment, nitric oxide gas treatment, and six concentrations of mercuric chloride solutions to determine the effects of limited oxygen environment, nitric oxide, and inhibited water flux through cell membrane in $17^{\circ}C$. Anoxic air treatment affected germination of tested six varieties very little. However root elongation rates were severely inhibited while shoot growth was affected less. Reductions in shoot and root elongations demonstrated genotypic variations. Nitric oxide delayed the germination of rice even though it didn't affect the final percent germination. Elongations of root and shoot were inhibited in nitric oxide treatment. The inhibitor effect of nitric oxide on the shoot elongation of rice was less severe, while nitric oxide completely inhibited the root emergence of rice. Concentrations of $HgCl_2$ greater than $300{\mu}M$ dramatically reduced the rate and percentage of germination when compared to distilled water treatment. The reduced percent germination showed the greatest variation among rice varieties in $500{\mu}M$ solution of mercuric chloride. Ansanbyeo, Jinheung, and Odaebyeo were affected less by $HgCl_2$, Nonganbyeo and Sangmibyeo were intermediate, and the germination of Andabyeo was greatly reduced by $HgCl_2$. Root elongation of germinated rice seedlings was more sensitive to oxygen deficits, nitric oxide, and $HgCl_2$ treatments than germination and shoot elongation. In conclusion, poor seedling establishment of rice sown in flooded paddy soils, in which the oxygen supply to the seeds is restricted, appears to the result of limited root elongation rate.

• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.660-665
• /
• 2014

다량의 무기물이 첨가된 고분자제품을 초박막의 두께로 고속생산 할 경우 가장 중요한 요소는 적절한 원재료의 선정도 중요하지만 대개의 경우 한정된 범위의 수지를 사용할 수밖에 없기 때문에, 가장 중요한 요소는 압출기내에서 흘러나온 용융수지의 흐름을 균일하게 유지할 수 있도록 고분자의 용융 유동에 적합한 최적의 다이스 설계와 압출기의 공정 파라미터의 제어를 통해 균일한 두께 유지와 연신이 필요하다. 이와 관련하여 고분자 압출필름의 적절한 연신을 위하여 압출조건이 연신에 미치는 영향에 대한 연구가 필요하지만 관련된 연구는 아직 충분히 이루어지지 않고 있다. 따라서 본 연구는 통기성 필름의 압출필름에 주로 사용되는 LLDPE(Linear Low Density Polyethylene)에 대하여 압출기의 실린더 온도, 압출속도, 압출기의 다이스온도, 냉각롤의 온도, 연신비, 그리고 연신롤 온도 등의 압출 조건의 변화가 압출필름의 연신에 미치는 영향에 대하여 압출실험을 통하여 연구하였다. 연구결과에서 연신비가 2.0:1일 때 고분자압출필름의 연신에 가장 큰 영향을 미침을 알 수 있었다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제25권6호
• /
• pp.593-601
• /
• 2021

Primary cilia on kidney tubular cells play crucial roles in maintaining structure and physiological function. Emerging evidence indicates that the absence of primary cilia, and their length, are associated with kidney diseases. The length of primary cilia in kidney tubular epithelial cells depends, at least in part, on oxidative stress and extracellular signal-regulated kinase 1/2 (ERK) activation. Hydrogen sulfide (H₂S) is involved in antioxidant systems and the ERK signaling pathway. Therefore, in this study, we investigated the role of H₂S in primary cilia elongation and the downstream pathway. In cultured Madin-Darby Canine Kidney cells, the length of primary cilia gradually increased up to 4 days after the cells were grown to confluent monolayers. In addition, the expression of H₂S-producing enzyme increased concomitantly with primary cilia length. Treatment with NaHS, an exogenous H₂S donor, accelerated the elongation of primary cilia whereas DL-propargylglycine (a cystathionine γ-lyase inhibitor) and hydroxylamine (a cystathionine-β-synthase inhibitor) delayed their elongation. NaHS treatment increased ERK activation and Sec10 and Arl13b protein expression, both of which are involved in cilia formation and elongation. Treatment with U0126, an ERK inhibitor, delayed elongation of primary cilia and blocked the effect of NaHS-mediated primary cilia elongation and Sec10 and Arl13b upregulation. Finally, we also found that H₂S accelerated primary cilia elongation after ischemic kidney injury. These results indicate that H₂S lengthens primary cilia through ERK activation and a consequent increase in Sec10 and Arl13b expression, suggesting that H₂S and its downstream targets could be novel molecular targets for regulating primary cilia.