• 제목/요약/키워드: $x^2-test$

검색결과 4,236건 처리시간 0.034초

개인 건강행태 및 지역보건의료 수준이 고혈압 의사진단에 미치는 영향 (The Effects of Individual Patient Behavior and Medical Care Level on Doctor's Diagnosis of Hypertension)

  • 박창수;김영란;이태용
    • 한국산학기술학회논문지
    • /
    • 제17권10호
    • /
    • pp.119-130
    • /
    • 2016
  • 본 연구는 의사로부터 고혈압으로 진단받은 사람들을 대상으로 개인 건강행태 및 지역 보건의료수준이 고혈압의사진단에 미치는 영향을 파악하고자 실시하였다. 연구는 2010년도 지역사회건강조사대상 만 19세 이상 성인 229,229명을 대상으로 개인특성에 따른 고혈압 의사진단의 차이 비교는 카이제곱 검정을 사용하였으며, 개인 및 지역수준 변수를 고려한 고혈압 의사진단의 관련지표의 지역 간 변이 파악은 다수준 로지스틱회귀분석를 실시하였다. 연구결과 개인건강행태수준에서 연령수준이 높을수록, 최종학력이 높을수록, 기초생활수급이 무일 때, 체질량지수가 높을수록, 일회음주량이 많을수록 고혈압 의사진단 경험률이 높았다. 또한 보건의료기관을 이용한 사람이, 한 달 동안 혈압측정횟수가 높을수록, 주관적 스트레스 수준이 높을수록, 우울감 경험이 있을 때 고혈압 의사진단 경험률이 높았다. 반면에 고용형태가 임금근로자인 경우, 고용주 및 자영업자에서, 걷기일수가 많을수록, 현재 흡연여부 경험이 적을수록, 민간의료보험에 가입한 사람에서 고혈압 의사진단 경험률이 낮았다. 건강행태 및 지역의 보건의료수준에 따라, 고혈압의사진단에 미치는 영향이 크다는 것을 알 수 있었으며, 추후 많은 연구에서 지역수준을 고려한 다수준 분석이 필요할 것으로 사료된다.

기관절제 및 단단문합술에 의한 소아 기관협착증의 치료 (Tracheal Resection and End to End Anastomosis for Tracheal Stenosis in Children)

  • 최종욱;정근;김용환;김혜정;박찬;최건
    • 대한기관식도과학회지
    • /
    • 제3권1호
    • /
    • pp.94-100
    • /
    • 1997
  • Background and Objectives : In children with tracheal stenosis, operative management remains a challenging problem due to difficulties of operative techniques and postoperative care. The purpose of this study was to determine the effectiveness of tracheal resection with end to end anastomosis as operative management for tracheal stenosis in children. Materials and Methods : 6 children with severe tracheal stenosis underwent tracheal resection with end to end anastomosis. Causes of stenosis were trauma in 1 case and prolonged intubation or tracheotomy in 5 cases. The diagnoses were made by radiologic evaluation (plain X-ray, CT, 3-Dimensional CT) and confirmed by direct laryngoscopy and ventilating bronchoscopy under general anesthesia. Thyroplasty and unilateral arytenoidectomy were performed in 1 case. Suprahyoid release was done in 1 case with severe adhesion. Decanulation was achieved following postoperative endoscopic examination and pulmonary function test. Postoperative physical and radiologic examinations were given at regular intervals. Results : Stenosis were improved from grade III grade I in 4 cases and from grade II to grade I in 2 cases. Decanulation was achieved on average postoperative 6 months in 5 cases, and 10 years in 1 case due to exertional dyspnea. There were 1 each case of immediate postoperative subcutaneous emphysema, pneumothorax and wound infection. Postoperative granulomas at anastomosis site were treated with laser vaporization under suspension laryngoscope and bronchoscope in 3 cases. There was 1 each case of delayed postoperative vocal cord palsy, aspiration pneumonia and loss of cough reflex. Conclusion In tracheal stenosis of children, tracheal resection with end to end anastomosis has good result with preservation of normal airway. Preoperative evaluation of local factors such as swallowing, vocal cord movement and cough reflex and general condition was important for successful treatment. As the cases in adults, authors considered this operation to be a curable operative management for tracheal stenosis.

  • PDF

중학생의 성 의식과 성 행동에 관한 연구 (A Study on Sexual Awareness and Sexual Behaviors among Middle School Students)

  • 나명숙;박영수
    • 한국학교ㆍ지역보건교육학회지
    • /
    • 제4권
    • /
    • pp.43-59
    • /
    • 2003
  • The purpose of this study was to examine whether the gender, grade and school type of middle school students made any differences to their sexual awareness and sexual behaviors in an effort to lay the groundwork for providing more efficient sex education. The research questions were posed as follows: First, what is the sexual awareness of middle school students? Second, what are the sexual behaviors of middle school students? Third, are their gender, school year and school type related to their sexual awareness and behaviors? The subjects in this study were 976 middle school students from Gyeonggi province. After a survey was conducted with questionnaires prepared by this researcher based on earlier studies to suit the purpose of the study, the collected data were analyzed with SPSS 10.0 program. The frequency analysis, x2 test and correlational analysis were implemented, and basic statistical data were obtained. The conclusions were as follows: First, regarding their sexual awareness, the largest group of them agreed that one must report in case of being raped(4.36), and the smallest number of them thought that one might have a sexual relationship with a person other than his or her spouse after marriage(1.56). Second, as for experience of indecent materials, part of sexual behaviors, 67.4 percent had ever contacted such materials. The most common medium through which they contacted them was the Internet(56.5%). The above-mentioned findings suggested that the sexual awareness of the middle school students wasn't influenced by gender or school type. But that varied with grade, as the third graders had the best sexual consciousness. Their sexual behaviors were different according to gender. The boy students contacted more indecent materials, and their experience of such materials varied with grade, since the third graders contacted the most obscene materials. And that also varied with school type, and the non-engineering students contacted more obscene materials. As for sexual drives, their masturbation experience was different according to gender, grade and school type. The number of the boys who practiced masturbation was four-fold larger than that of the girls, and the second graders had more such experience. By school type, the non-engineering students practiced more masturbation, but there was no significant gap between their kissing, caressing and dating experiences.

  • PDF

Simulation study on effects of loading rate on uniaxial compression failure of composite rock-coal layer

  • Chen, Shao J.;Yin, Da W.;Jiang, N.;Wang, F.;Guo, Wei J.
    • Geomechanics and Engineering
    • /
    • 제17권4호
    • /
    • pp.333-342
    • /
    • 2019
  • Geological dynamic hazards during coal mining can be caused by the failure of a composite system consisting of roof rock and coal layers, subject to different loading rates due to different advancing velocities in the working face. In this paper, the uniaxial compression test simulations on the composite rock-coal layers were performed using $PFC^{2D}$ software and especially the effects of loading rate on the stress-strain behavior, strength characteristics and crack nucleation, propagation and coalescence in a composite layer were analyzed. In addition, considering the composite layer, the mechanisms for the advanced bore decompression in coal to prevent the geological dynamic hazards at a rapid advancing velocity of working face were explored. The uniaxial compressive strength and peak strain are found to increase with the increase of loading rate. After post-peak point, the stress-strain curve shows a steep stepped drop at a low loading rate, while the stress-strain curve exhibits a slowly progressive decrease at a high loading rate. The cracking mainly occurs within coal, and no apparent cracking is observed for rock. While at a high loading rate, the rock near the bedding plane is damaged by rapid crack propagation in coal. The cracking pattern is not a single shear zone, but exhibits as two simultaneously propagating shear zones in a "X" shape. Following this, the coal breaks into many pieces and the fragment size and number increase with loading rate. Whereas a low loading rate promotes the development of tensile crack, the failure pattern shows a V-shaped hybrid shear and tensile failure. The shear failure becomes dominant with an increasing loading rate. Meanwhile, with the increase of loading rate, the width of the main shear failure zone increases. Moreover, the advanced bore decompression changes the physical property and energy accumulation conditions of the composite layer, which increases the strain energy dissipation, and the occurrence possibility of geological dynamic hazards is reduced at a rapid advancing velocity of working face.

드릴공구의 이종질화막상 DLC 희생층 적용을 통한 공구 수명 개선 연구 (A Study on the Improvement of Tool's Life by Applying DLC Sacrificial Layer on Nitride Hard Coated Drill Tools)

  • 강용진;김도현;장영준;김종국
    • 한국표면공학회지
    • /
    • 제53권6호
    • /
    • pp.271-279
    • /
    • 2020
  • Non-ferrous metals, widely used in the mechanical industry, are difficult to machine, particularly by drilling and tapping. Since non-ferrous metals have a strong tendency to adhere to the cutting tool, the tool life is greatly deteriorated. Diamond-like carbon (DLC) is one of the promising candidates to improve the performance and life of cutting tool due to their low frictional property. In this study, a sacrificial DLC layer is applied on the hard nitride coated drill tool to improve the durability. The DLC coatings are fabricated by controlling the acceleration voltage of the linear ion source in the range of 0.6~1.8 kV. As a result, the optimized hardness(20 GPa) and wear resistance(1.4 x 10-8 ㎣/N·m) were obtained at the 1.4 kV. Then, the optimized DLC coating is applied as an sacrificial layer on the hard nitride coating to evaluate the performance and life of cutting tool. The Vickers hardness of the composite coatings were similar to those of the nitride coatings (AlCrN, AlTiSiN), but the friction coefficients were significantly reduced to 0.13 compared to 0.63 of nitride coatings. The drilling test were performed on S55C plate using a drilling machine at rotation speed of 2,500 rpm and penetration rate of 0.25 m/rev. The result showed that the wear width of the composite coated drills were 200 % lower than those of the AlCrN, AlTiSiN coated drills. In addition, the cutting forces of the composite coated drills were 13 and 15 % lower than that of AlCrN, AlTiSiN coated drills, respectively, as it reduced the aluminum clogging. Finally, the application of the DLC sacrificial layer prevents initial chipping through its low friction property and improves drilling quality with efficient chip removal.

국내 레토르트 삼계탕 제품의 포장 개선을 위한 소비자 기호도 조사 (A Survey on the Consumer Preferences for Improving Retort Food Packaging of Samgyetang on Domestic Market in Korea)

  • 이명호;김민휘;이윤석
    • 한국포장학회지
    • /
    • 제27권3호
    • /
    • pp.129-139
    • /
    • 2021
  • 최근 건강 식품에 대한 관심이 높아짐과 함께 우리나라의 대표적인 여름철 전통 보양식인 삼계탕의 소비 증대를 위한 노력이 이루어지고 있다. 그러나 삼계탕은 조리를 위해 다양한 재료 준비와 시간, 노력 등이 많이 드는 요리로 시장성 확대에 어려움이 있어 가정간편식 형태 중 하나인 레토르트 제품으로 개발되어 판매되고 있다. 레토르트 삼계탕 제품개발로 장기 보존이 가능해지고 수출량이 증가하면서 레토르트 삼계탕 제품의 소비 및 시장성 확보를 하기 위해 삼계탕 가공 및 레시피, 디자인 선호도 등 다양한 연구가 이루어지고 있으나 소비자의 기호성을 충족시키기 위한 포장 선호도 조사 연구는 아직 미비한 실정이다. 본 연구에서는 레토르트 삼계탕 제품의 포장 디자인 및 편의성 선호도 조사 연구를 기반으로 소비자들이 제품의 보호성과 편의성을 주는 포장재를 선호하는 것으로 파악되었으며, 특히 조리 편의성을 위해 별도의 용기 없이 전자레인지 조리가 가능한 레토르트 제품개발이 필요한 것으로 파악되었다. 따라서 국내 소비자의 레토르트 삼계탕 제품 포장 선호도 조사 연구를 바탕으로 국외 수출 증대를 위한 레토르트 제품의 종류 및 형태에 따른 포장 소비 선호도 그리고 각 포장 재질과 편의성 개선에 따른 상품화 가능성 및 가격 변화 요인을 고려한 연구가 향후 필요할 것으로 판단된다.

염화알루미늄 지혈제가 유치와 레진강화형 글라스아이오노머 시멘트의 결합강도에 미치는 영향 (Effect of Aluminum Chloride Hemostatic Agent on Bonding Strength of RMGIC in Primary Tooth)

  • 우승희;신지선;이준행;한미란;김종수
    • 대한소아치과학회지
    • /
    • 제48권4호
    • /
    • pp.397-404
    • /
    • 2021
  • 이 연구의 목적은 유치의 상아질면에서 염화알루미늄 지혈제의 적용이 레진강화형 글라스아이오노머(RMGIC)의 결합에 미치는 영향을 전단결합강도, 주사전자현미경(SEM), 에너지분산형 분광분석기(EDS)를 통하여 평가하는 것이다. 36개의 유구치가 이용되었으며, 상아질이 노출되도록 시편을 제작하여 상아질 전처리과정에 따라 4개의 군으로 분류하였다. I, II, III, IV군은 각각 전처리를 하지 않은 군, 25% polyacrylic acid(PAA)를 10초간 적용한 군, 21.3% 염화알루미늄 지혈제를 1분간 적용한 군, IV군은 염화알루미늄 지혈제를 1분간 사용한 뒤 PAA를 10초간 적용한 군으로 설정하였다. 각 군당 15개의 시편에 RMGIC를 중합하여 전단결합강도를 측정하였다. 각 군당 3개의 시편을 SEM/EDS 분석하였다. II군, IV군, I군, III군 순서로 결합강도가 유의하게 높았다. SEM 촬영으로 염화알루미늄 지혈제를 적용한 군들은 도말층이 일부 제거 되었음을 확인하였다. EDS 분석결과, 염화알루미늄 지혈제 적용 후 칼슘의 감소 및 염소와 알루미늄의 증가가 확인되었고, PAA 사용후에도 증가한 염소는 감소하지 않음을 관찰하였다. 연구를 통해 염화알루미늄 지혈제는 PAA의 사용에 관계없이 상아질에서 RMGIC의 전단결합강도를 감소시키는 것을 알 수 있다.

청송심씨 묘에서 출토된 금직물의 비파괴 과학적 분석 (Non-Destructive Scientific Analysis of the Gold Fabric Excavated of Cheongsong Shim's Grave)

  • 이황조;위광철
    • 보존과학회지
    • /
    • 제38권3호
    • /
    • pp.243-253
    • /
    • 2022
  • 본 연구에서는 청송심씨묘 출토 금직물 유물 2점(부금 원삼, 직금 치마)에 대한 비파괴 분석방법을 이용하여 유물 상태, 섬유 재질, 표면 오구(汚垢), 금속사에 대한 재료적 특성을 파악하였다. 출토 당시 유물의 상태는 모두 갈변되어 본래의 색상을 확인할 수 없으며, 섬유재질은 SEM과 FT-IR의 Amide I, II, III, IV 피크와 정색 반응 결과들로 누에고치로부터 얻은 견 섬유임을 확인할 수 있었다. 표면 오염물인 흰색 오구와 검정색 오구는 FT-IR, XRF 분석결과 시신의 부패와 미생물 분해로 나타난 지방질, 단백질 등의 가수분해 물질임을 확인할 수 있었다. 금속사의 금박층을 XRF로 분석한 결과 금(Au)으로 확인되었으며, 금속사 배지에 대한 FT-IR, 정색 반응 결과 배지의 접착제 성분은 Amide I, II, III와 3000 cm-1 전·후의 Amide A, B의 결과로 동물성 교(膠)로 확인되었고, 배지는 정색 반응 결과 국내에서 생산된 닥나무 인피 섬유인 한지로 확인할 수 있었다.

동해, 울릉 분지 심해토의 지반공학특성 (Geotechnical Engineering Characteristics of Ulleung Basin Sediment, East Sea)

  • 이창호;윤태섭;산타마리나;박장준;이종섭
    • 한국지반공학회논문집
    • /
    • 제25권6호
    • /
    • pp.17-29
    • /
    • 2009
  • 에너지 수요의 증가 및 에너지 탐사와 연관되어 해저 지반의 조사가 증가하고 있다. 해수면 2100m 해저 110m 아래에서 얻어진 압력 코어 시료의 메탄 하이드레이트 생산 시험 후 얻어진 사료를 이용하여 울릉 분지 심해토의 지반공학적 특성을 조사하였다. 기본 토성, 광물학적 특성, 화학 조성, 그리고 미세구조 관찰을 위하여 토성 실험, XRD, 그리고 SEM을 실시하였다. 또한, 멀티 센서 압밀셀을 이용하여 두 시료의 압축성, 전단파 및 전자기파 파악하였다. 강도특성은 직접전단실험 이용하여 산정되었다. 주요 광물로는 카오리나이트, 일라이트, 크로라이트(chlorite), 그리고 캘싸이트(calcite)가 관찰되었다. SEM 결과 잘 발달된 내 외부 간극 구조가 관찰되었다. 수직유효응력의 증가에 따라 전단파 속도, 전기비저항, 실수 유전율, 그리고 전기전도도는 이중선형 거동을 보였다. 직접전단실험으로 얻은 마찰각은 약 $21^{\circ}$로 선행연구와 비슷한 결과를 보였다. 본 연구는 가스 하이드레이트와 같은 에너지 자원의 개발 및 새로운 지반공학적 영역의 확보를 위하여 심해 퇴적토의 거동 이해의 중요성을 보여준다.

웹기반 강의지원시스템에 대한 대학교수의 활용도분석 (Utility Analysis on Activating Web-Based Course Support System by Faculty in Universities)

  • 김경우
    • 한국컴퓨터정보학회논문지
    • /
    • 제14권11호
    • /
    • pp.221-232
    • /
    • 2009
  • 본 연구는 4년제 대학에서 교수자에 따른 웹기반 강의지원시스템의 활용도를 분석하였다. 수집 자료는 수도권 S대학, D대학, K대학의 2009년1학기 강의에서 담당교수 5,023명과 12,733강좌를 대상으로 웹기반 수업지원시스템의 활용도를 서버에 저장된 로그파일을 이용하여 분석하였다. 구체적으로 교수자 및 계열별 강좌의 웹기반 수업지원시스템의 활용빈도 및 백분율을 제시하였다. 뿐만 아니라 수업지원시스템의 주요기능의 활용빈도 및 백분율이 분석되었고, 주요기능 중 공지사항, 수업자료, 공유게시판, 자유게시판 이용횟수에 대하여 교수자 및 계열별 이용횟수에 대하여 카이분석을 실시하였다. 연구결과 전체교수자의 62.28%와 전체강좌의 50.3%가 웹기반 수업지원시스템을 활용하였다. 주요 기능의 이용도를 분석한 결과 수업자료공유의 목적이 43.8%로 가장 높았으며, 공지사항이나 토론 기능의 이용은 다소 낮은 편이다. 이는 대부분의 교수자나 강좌에서 웹기반수업지원 시스템을 오프라인수업의 보충적 수단으로 활용하고 있어 실제적인 운용과 설계가 요구된다.