• Journal of Korean Society of Transportation
• /
• v.18 no.5
• /
• pp.33-42
• /
• 2000

This Paper is a Part of research Project series to analyze unique traffic characteristics observable within weaving sections on urban freeways. The research objectives were to establish with headway distribution and maximum Passing volume on weaving sections the basis of weaving designs that can promote safety and efficiency. Until now, when one wants to check the maximum Passing volume on weaving sections, it is taken for granted using headway distribution of freeway basic section. However. it was suspected in this research that for weaving sections different form of headway distribution had better be used. To prove this, field surveys were made to count headway intervals which supposedly were influenced not only by freeway basic section flows but also by weaving flows and later on used to develop headway distribution for weaving sections. For validation of the developed headway distribution, $x^2$-test was applied to three different data set of observed headways, currently used headway distribution for basic sections(Pearson Type III distribution) and new headway distribution. The result indicated new headway distribution as the most appropriate distribution form. Also, maximum passing volume within weaving sections was calculated based on new headway distribution and compared with Drew's maximum Passing volume.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.1
• /
• pp.71-91
• /
• 2018

In recent years, application of UAV(Unmanned Aerial Vehicle) to seed sowing and pest control has been actively carried out in the field of agriculture. In this study, UAS(Unmanned Aerial System) is constructed by combining image sensor of various wavelength band and SfM((Structure from Motion) based image analysis technique in UAV. Utilization of UAS based vegetation survey was investigated and the applicability of precision farming was examined. For this purposes, a UAS consisting of a combination of a VIS_RGB(Visible Red, Green, and Blue) image sensor, a modified BG_NIR(Blue Green_Near Infrared Red) image sensor, and a TIR(Thermal Infrared Red) sensor with a wide bandwidth of $7.5{\mu}m$ to $13.5{\mu}m$ was constructed for a low cost UAV. In addition, a total of ten vegetation indices were selected to investigate the chlorophyll, nitrogen and water contents of plants with visible, near infrared, and infrared wavelength's image sensors. The images of each wavelength band for the test area were analyzed and the correlation between the distribution of vegetation index and the vegetation index were compared with status of the previously surveyed vegetation and ground cover. The ability to perform vegetation state detection using images obtained by mounting multiple image sensors on low cost UAV was investigated. As the utility of UAS equipped with VIS_RGB, BG_NIR and TIR image sensors on the low cost UAV has proven to be more economical and efficient than previous vegetation survey methods that depend on satellites and aerial images, is expected to be used in areas such as precision agriculture, water and forest research.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.27 no.1
• /
• pp.123-140
• /
• 1997

The purpose of this study was to investigate effects of osteoporosis on fracture wound healing in the calcium deficient rat. To research the experiment some ten-week old Wistar strain rats with approximately 300 gms weight were selected. Then, the rats were divided into two groups: Normal diet group(rats given a normal diet before and after bone fracture) and Low calcium diet group(rats given a low calcium diet before and after bone fracture). Both groups had been provided with each diet for three weeks. When the rats became thirteen weeks old, the mandibular angle of rats in both groups was artificially fractured for test. The healing of fracture wounds was reviewed by using soft x-ray radiography and /sup 99m/Tc-MDP bone scan and also histopathologic examination. The obtained results were as follows : 1. The radiolucency of the fracture site for the Normal diet group started to decrease from the 14th day since the experiment was made, while the Low calcium diet group began decrease in the radiolucency from the 21st day of the experiment. The radiolucency for the Normal diet group disappeared at the 42nd day, but one for the Low calcium diet group disappeared at the 56th day of the experiment. 2. The highest uptake rate of /sup 99m/Tc-MDP stood at the 14th day of the experiment in the Normal diet group and the Low calcium diet group's maximum rate was recorded at the 21st day of the experiment. These both groups were gradually experiencing decrease in the uptake rate as the experiment time was going on. However, the uptake rate in the Low calcium diet group was lower than one in the Normal diet group. 3. For the Normal diet group, the newly formed trabeculae, which were similar to one of the surroundung bone, were seen at the 42nd day of the experiment. On the other hand, the Low calcium diet group showed at the 56th day of the experiment that the osteoporotic findings looked weak, irregular trabeculae, and also large bone marrow space were observed clearly. As a result of the above experiment, it is said that the healing of the fracture can be completed for both groups, the Normal diet group and the Low calcium diet group. However, the amount of the newly formed bone wound in the Low calcium diet group is rather decreased compared to one in the Normal diet group and at the same time the healing of the fracture is delayed in the Low calcium diet group. Consequently, for the successful healing of fracture in osteoporosis, it is considered that the management of the etiologic factors of osteoporosis must be preceded. The more study of calcium metabolism and functions of osteoblast and osteoclast needs to proceed on.

• Journal of Korean Academy of Nursing
• /
• v.23 no.4
• /
• pp.678-693
• /
• 1993

The purposes of this study were to describe the level of vision and hearing impairments, depression and functional capacity, among Korean institutionalized elderly and to examine the relation-ship between sensory impairments, depression, and functional capacity in these people. The final pupose was to test the cognitive function path model using sensory competencies as predictors. A convenience sample of thirty nine male and 90 female subjects with a mean age of 80.5 were the subjects of this study. The subjects were tested for cognitive function, and vision and hearing impairments. Physical function and social function were measured by observation of designated task performance by the subjects. Their level of de-pression was measured using a Geriatric Depression Scale administered through an interview. Individual subjective ratings of hearing and vision were marked by the subjects, on a ladder scale. The results of the study showed that 48.8% of the subjects had a hearing impairment, 63.5% had a vision impairement, and 36.4% had both a vision and hearing impairement. The four sensory groups (no sensory impairement, hearing impairement, vision impairement, hearing and vision impairement) were tested for differences in depression, physical function, social behavior and cognitive function. The only significant difference that was found was in cognitive function, between the no sensory impairement group and the hearing and vision impairement group(F=3.25, P<.05), Subjective ratings of hearing showed a significant correlation with cognitive function(r=.34, p<.001) and with social behavior(r=.31, p<.001). There was no correlation between subjective vision ratings and cognitive function or social behavior. However there was a significant correlation between vision and hearing(r=.49, p<.001). There was also a significant negative correlation between age and vision(r=-.21, p<.01) and between age and hear-ing(r=-.34, p<.001). There was a significant correlation between depression and physical function (r=-.32, p<.001) but there was no correlation between depression and cognitive function or social behavior. Based on the literature review and the result, this study, a path model of sensory competence-> cognitive function- >social behavior was developed and tested : Perceived vision and perceived hearing were the exogenous variahles and cognitive function and social behavior were the endogeneous variables in the model. The path analysis result demonstrated an accept-able fit (GFI=.997, AGFI=.972, X$^2$=.72 (p=.396), RMSR=.019) between the data and the model. There was a significant direct effect($\beta$=.38) of perceived hearing on cognitive function. There was a significant direct effect ($\beta$=.32) of cognitive function on social behavior. The total effect of hearing on social behavior was $\beta$=.32 including the indirect effect ($\beta$=.12) . However perceived vsion had little effect ($\beta$=-.08) on cognitive function. The result of path analysis confirms that hearing levels influence cognitive function, and both hearing and cognitive function levels influence social behavior. However, vision has little effect on cognitive function or on social behavior. For the next study, a combined model of the pre viously developed environment - >depression- > physical and social function model, and the present cognitive function model, should be tested to further refine the functional capacity model. There also a need for longitudinal study of functional capacity and sencory competence in order to better understand how declining sensory competence influences functional capacity and how it effects in-creasing dependency and nursing needs in the elderly.

• Journal of the Korea Concrete Institute
• /
• v.28 no.3
• /
• pp.317-328
• /
• 2016

This research intends to understand the impact of super-absorbent polymer (SAP) as an internal curing agent in Ultra-High Performance Concrete (UHPC). Two different types of SAPs of acrylic acid (SAP_AA) and acrylic acid-co-acrylamide (SAP_AM) were examined with UHPC formulation. Isothermal calorimetry and x-ray diffraction experiments revealed the impact of polymers with the different chemical bonds on cement hydration. To test its feasibility as a shrinkage reducing admixture for UHPC, a series of experiments including flowability, compressive strength, rapid chloride permeability and autogenous shrinkage profile was performed. While both SAPs showed a reduction in autogenous shrinkage, it has been concluded that the SAP size and chemical form significantly affect the performance as an internal curing agent in UHPC by controlling cement hydration and porosity modification. Between the tested SAPs, SAP_AM which absorbs more water in UHPC than SAP_AA, shows better mechanical and durability performance.

• Journal of Periodontal and Implant Science
• /
• v.33 no.2
• /
• pp.159-166
• /
• 2003

The purpose of this study was to investigate and compare the frequence of 4 periodontal pathogens in the supra- and subgingival plaque in periodontally healthy subjects. Twenty adult individuals aged 22 to 28 years (mean age 23.65 years) participated in this study. All subjects had no pocket sites more than 3 mm deep, and the sites selected for sampling were all negative for bleeding. After drying and isolation of the sites with cotton rolls, supragingival plaque was sampled using sterile periodontal curette. Each plaque sample was placed in individual tubes containing 500 ml of 1X PBS. After removal of the supragingival sample and any remaining supragingival plaque, subgingival plaque samples were taken from the same sites using sterile curette and placed in similar individual tubes. Identification of 4 putative periodontal pathogens from the samples was performed by polymerase chain reaction based on 16S rDNA. Chi-square test was employed to identify significant explanatory variables for the presence of the 4 periodontal pathogens. The data show that Actinobacillus actinmycetemcomitans, Porphyromonanas gingivalis, Bacteroides forsythus, and Fusobacterium nucleatum occurred in 16.9%, 14.4%, 52.5%, and 80.6%, respectively. No significant differences were noted in the periodontal pathogens between supra- and subgingival plaques according to the kind of teeth. However, the incisors were at higher risk for harboring F. nucleatum (p <0.05). Conclusion: These results reveal that anaerobic periodontal pathogens can be detected in supragingival plaques. Supragingival plaque may function as a reservoir of peri-odotopathogens.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.4
• /
• pp.1247-1251
• /
• 2012

Background: Helicobacter pylori is an important gastrointestinal pathogen related to the development of not only atrophic gastritis and peptic ulcer, but also gastric cancer. Human leukocyte antigens (HLA) may play particular roles in host immune responses to bacterial antigens. This study aimed to investigate the association between HLA-DQA1 and DQB1 genotypes and haplotypes vs H. pylori infection in an Indonesian population. Methods: We selected 294 healthy participants in Mataram, Lombok Island, Indonesia. H. pylori infection was determined by urea breath test (UBT). We analyzed HLA-DQA1 and DQB1 genotypes by PCR-RFLP and constructed haplotypes of HLA-DQA1 and DQB1 genes. Multiple comparisons were conducted according to the Bonferroni method. Results: The H. pylori infection rate was 11.2% in this Indonesian population. The DQB1*0401 genotype was noted to be associated with a high risk of H. pylori infection, compared with the DQB1*0301 genotype. None of the HLA-DQA1 or DQB1 haplotypes were related to the risk of H. pylori infection. Conclusions: The study suggests that HLADQB1 genes play important roles in H. pylori infection, but there was no statistically significant association between HLA-DQA1 or DQB1 haplotypes and H.pylori infection in our Lombok Indonesian population.

• Journal of Fashion Business
• /
• v.10 no.4
• /
• pp.16-28
• /
• 2006

The purpose of this study is to investigate the content and changes of modern Korean men's wear advertisement from the 1960s to the 1990s by reviewing fashion magazines and pictorials. Research problems were as follows.; First, analyze the types and their units of measurement in men's fashion advertisements from 1962 to 1998. Second, examine the differences of quantitative change in men's fashion advertisements according to each period. The total 857 advertisements were selected from Shin Dong-A, Joongang Magazine, and Bokjangwolbo from 1972 to 1998. For analyze the result, frequency analysis and $x^2$-test were used. Results were as follows. First, through the review of literatures and pre-tests, 6 units of measurement were identified. They were product type(formal wear, casual wear, sports wear, dress shirts, accessory, inner wear, fabric and the others), brand type(national brand, licensed brand, imported brand, others), appeal type(image, product, others), representation type(photograph, illustration, others), medium type(man, product, others), and color type of advertisement(black & white picture, color picture). Second, for the types of advertisements, formal wear, national brand, image appeal, figure medium, photograph for presentation and color picture are the most frequently shown in men's fashion advertisements from 1962 to 1998. Third, for product, more accessory advertisements were found than the clothing in the 60s and the 70s, and casual wear advertisements in the 80s and formal wear advertisements in the 90s were dominated. National brand type was dominant through all four period. Product appeal type in the 60s and the 70s and image appeal type in the 80s and the 90s were prevailed. For medium, product type in the 60s and the 70s and figure type in the 80s and the 90s were dominated. Black & white picture in the 60s and the 70s and color picture in the 80s and the 90s were prevailed. Lastly, photograph was the most frequently used for presentation type through all periods.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.27-36
• /
• 2005

This thesis proposed an effective encryption method for the DCT-based image/video contents and made it possible to operate in a high speed by implementing it as an optimized hardware. By considering the increase in the amount of the calculation in the image/video compression, reconstruction and encryption, an partial encryption was performed, in which only the important information (DC and DPCM coefficients) were selected as the data to be encrypted. As the result, the encryption cost decreased when all the original image was encrypted. As the encryption algorithm one of the multi-mode AES, DES, or SEED can be used. The proposed encryption method was implemented in software to be experimented with TM-5 for about 1,000 test images. From the result, it was verified that to induce the original image from the encrypted one is not possible. At that situation, the decrease in compression ratio was only $1.6\%$. The hardware encryption system implemented in Verilog-HDL was synthesized to find the gate-level circuit in the SynopsysTM design compiler with the Hynix $0.25{\mu}m$ CMOS Phantom-cell library. Timing simulation was performed by Verilog-XL from CadenceTM, which resulted in the stable operation in the frequency above 100MHz. Accordingly, the proposed encryption method and the implemented hardware are expected to be effectively used as a good solution for the end-to-end security which is considered as one of the important problems.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.271-277
• /
• 2015

PURPOSE. This study was to evaluate the marginal fit of two CAD-CAM anatomic contour zirconia crown systems compared to lithium disilicate glass-ceramic crowns. MATERIALS AND METHODS. Shoulder and deep chamfer margin were formed on each acrylic resin tooth model of a maxillary first premolar. Two CAD-CAM systems (Prettau$^{(R)}$Zirconia and ZENOSTAR$^{(R)}$ZR translucent) and lithium disilicate glass ceramic (IPS e.max$^{(R)}$press) crowns were made (n=16). Each crown was bonded to stone dies with resin cement (Rely X Unicem). Marginal gap and absolute marginal discrepancy of crowns were measured using a light microscope equipped with a digital camera (Leica DFC295) magnified by a factor of 100. Two-way analysis of variance (ANOVA) and post-hoc Tukey's HSD test were conducted to analyze the significance of crown marginal fit regarding the finish line configuration and the fabrication system. RESULTS. The mean marginal gap of lithium disilicate glass ceramic crowns (IPS e.max$^{(R)}$press) was significantly lower than that of the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia) (P<.05). Both fabrication systems and finish line configurations significantly influenced the absolute marginal discrepancy (P<.05). CONCLUSION. The lithium disilicate glass ceramic crown (IPS e.max$^{(R)}$press) had significantly smaller marginal gap than the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia). In terms of absolute marginal discrepancy, the CAD-CAM anatomic contour zirconia crown system (ZENOSTAR$^{(R)}$ZR translucent) had under-extended margin, whereas the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia) and lithium disilicate glass ceramic crowns (IPS e.max$^{(R)}$press) had overextended margins.