• Parasites, Hosts and Diseases
• /
• v.36 no.1
• /
• pp.15-22
• /
• 1998

An in uitro culture technique was established for harvesting Strongwloides venezuelensis free-living infective larvae using a nutrient broth medium as a substitute for rat-feces in polyvinyl culture bags ($10{\;}{\times}{\;}12{\;}cm$). The egg hatch rate V) in sterile saline at different incubation temperatures (X) was expressed as the quadratic function, Y = $-0.192X^2$ + 8.673x - 19.550 (r = 0.901). The highest (100%) egghatch rate was observed at $25^{\circ}C$. A significant difference (p<0.05) in development rate W) of free-living infective larvae was observed between different concentrations of nutrient broth (X) which was highest (20.6%1 in 0.12% nutrient broth concentrations, incubated at $20^{\circ}C$ for 5 days [Y = $-864.032X^2$ + 245.995X- 0.560 (r = 0.875)]. Yields (Y) of infective larvae were observed relatively high when the culture medium was incubated at higher temperatures (X) which peaked at $25^{\circ}C$ (20.0%) than at lower temperatures. $15^{\circ}C$M (10.9%) and $20^{\circ}C$ (18.1%) [Y = $-0.189X^2$ + 8.387x- 72.795 (r = 0.981)]. The period W) required for the development of infective larvae decreased with higher incubation temperatures (X) [Y = $0.035X^2$ - 2.025X + 32.375 (r = 0.995)] The highest yield (19.2%) of infective larvae was obtained from culture bag inoculated with 15.000 eggs than with below and over 15,000 eggs in 0.12% nutrient broth and incubated at $25^{\circ}C$ for 4 days. The newly adapted culture method (from egg to third-stage larva) may be useful as a bio-bar/bioassay system for screening new chemical products, anthelmintics and pesticides, as well as for parasito immunological studies with Strongwloides species.

• The Korean Journal of Pesticide Science
• /
• v.2 no.3
• /
• pp.64-69
• /
• 1998

New thirty derivatives of 5,6-dihydro-2-trifluoromethyl-1,4-oxathiin carboxanilide as substrate(S) were synthesized and their fungicidal activities in vivo against rice sheath blight(Rhizoctonia solani) and wheat leaf rust(Puccinia recondita) were examined. The structure activity relationships(SAR) between the activities($pI_{50}$) and a physicochemical parameters of substituents(X) at the phenylcarbamoyl group were analyzed using the adaptive regression analysis method. The 3-methoxy, 11, 3-isopropyloxy, 13 and 3-isopropyl substituent, 25 as X on the phenylcarbamoyl group exhibited the most highest fungicidal activity against the two fungi. The fungicidal potency of the (S) against Puccinia recondita was higher than Rhizoctonia solani. In case of Rhizoctonia solani, the molecular hydrophobicity(${\pi}>0$) and resonance effect(R<0) by meta-alkyl substitutents with electron donating were important factors in determining fungicidal activity. And the HOMO energy(HOMO>0), ABSQ, sum of absolute values of the atomic charges on each atom and specific polarizability(Sp.Pol<0) of (S) were significantly influential towards fungicidal activity against Puccinia recondita.. The interaction between (S) and receptor agonist from the based on SAR studies proceeds through charge-control reaction, and conditions to show higher activity has been also discussed.

• Journal of the Korean Chemical Society
• /
• v.63 no.6
• /
• pp.453-458
• /
• 2019

Synthesis of ZnCo₂O₃ oxide is performed by sol-gel method via nitrate-citrate route. Powder X-ray diffraction (XRD) study shows monoclinic unit cell having lattice parameters: a = 5.721(1) Å, b = 8.073(2) Å, c = 5.670(1) Å, β = 93.221(8)°, space group P_2/m and Z = 4. Average crystallite sizes determined by Scherrer equation are the range ~14-32 nm, whereas SEM micrographs show nano-micro meter size particles formed in ZnCo₂O₃. Endothermic peak at ~798 K in the Differential scanning calorimetric (DSC) trace without weight loss could be due to structural transformation and the endothermic peak ~1143 K with weight loss is due to reversible loss of O₂ in air atmosphere. Energy Dispersive X-ray (EDX) analysis profile shows the presence of elements Zn, Co and O which indicates the purity of the sample. Magnetic measurements in the range of +12 kOe to -12 kOe at 10 K, 77 K, 120 K and at 300 K by PPMS-II Physical Property Measurement System (PPMS) shows hysteresis loops having very low values of the coercivity and retentivity which indicates the weakly ferromagnetic nature of the oxide. Observed X-band EPR isotropic lineshapes at 300 K and 77 K show positive g-shift at g_iso ~2.230 and g_iso ~2.217, respectively which is in agreement with the presence of paramagnetic site Co²⁺(3d⁷) in the oxide. DC conductivity value of 2.875 ×10^-8 S/cm indicates very weakly semiconducting nature of ZnCo₂O₃ at 300 K. DRS absorption bands ~357 nm, ~572 nm, ~619 nm and ~654 nm are due to the d-d transitions ⁴T_1g(⁴F)→²E_g(²G), ⁴T_1g(⁴F)→⁴T_1g(⁴P), ⁴T_1g(⁴F)→⁴A_2g(⁴F), ⁴T_1g(⁴F)→⁴T_2g(⁴F), respectively in octahedral ligand field around Co²⁺ ions. Direct band gap energy, E_g~ 1.5 eV in the oxide is obtained by extrapolating the linear part of the Tauc plot to the energy axis indicates fairly strong semiconducting nature of ZnCo₂O₃.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.90-90
• /
• 2017

생력화를 위한 구기자의 수확 기계화는 열악한 수확작업환경을 쾌적한 작업환경으로 개선하고 노동력 감소, 생산비 절감을 할 수 있다. 관행 손 수확과 진동 고리형 수확기 방법보다 높은 작업 능률 향상으로 영농규모의 확대 촉진 및 안정적인 영농 구조를 구축하여 재배농가의 생산비를 절감하여 경쟁력을 높일 수 있으며, 기존 인력에 의존하였던 수확작업을 기계화함으로서 전업농 및 대단위 경작이 가능하게 함으로서 국내에서 생산한 양질의 구기자를 국민에게 안정적으로 제공할 수 있다. 따라서, 본 연구는 구기자 수확작업의 생력화를 위하여 개발 보급된 수목형의 재배법 특성을 분석하고 이를 토대로 타격장치를 적용한 보행형 구기자 수확기를 개발하는데 목적이 있다. 수목형 구기자나무의 분지에 착과되어 있는 숙과를 주행하면서 탈과 할 수 있는 탈과 장치를 제작하기 위하여 타격형 탈과 장치를 3D 모델링 작업(Inventor V.11, Autodesk, USA) 후 시작기를 제작, 구기자 수확 시작기는 주행부, 타격장치, 집과부, 분지유인부로 구성하였다. 구기자 수확 시작기의 최대 높이는 형태학적 특성을 토대로 타격봉의 높이를 900 mm 이하로 제한하였으며, 조향장치의 높이는 800 mm로 하였다. 주행부는 구기자 재식 조사결과를 이용하여 고랑 폭 1,500 mm 이하에서 자유롭게 전 후진 이동이 가능하고 경사로 등을 주행 시에도 안전성을 높이기 위해 자동브레이크 기능이 있으며 타격장치의 타격 봉은 알루미늄 재질로 지름 100 mm, 길이 400 mm로 설계 제작하였으며, 구기자 분지 타격 시 분지와 타격 봉이 수직 상태로 타격이 가능하도록 제작, 집과장치는 포장의 두둑, 고랑은 일괄 표준화가 되어 있지않아 청양구기자시험장에서 측정한 재배법을 바탕으로 설계된 수집부 프레임의 적용범위는 폭 450 mm, 길이 720 mm, 높이 1,500 mm를 집과 범위로 하여 설계 제작하였다. 타격 방식을 적용한 구기자 수확기 성능평가 결과 조숙기에 30초 이상의 탈과 시 87.5 % 이상 탈과는 어려울 것으로 판단되었으며, 성숙기에는 타격시간에 관계없이 92 %의 매우 우수한 탈과율이 나타났다. 성숙기의 주행속도 48 m/h 일 때 탈과율과 집과율은 89 %, 92 %로 나타났다.단위작업시간당 최대 수확 능력은 관행작업 2.9 kg/hr, 진동고리형 수확기 5.2 kg/hr, 타격방식을 적용한 구기자 수확기는 최소 7.6 kg/hr, 최대 24.1 kg/hr로 관행작업과 비교하여 주행속도와 시기별 최소 2.6배, 최대 8.3배의 작업 성능 차이가 나타났다. 재배양식에서는 기계화 수목형이 적합한 것으로 나타났고, 타격방식을 적용한 보행형 구기자 수확기를 이용하여 수형별 시간대별 수확성능을 시험한 결과 우수한 결과가 나타났다. 이에 따라 구기자 재배 농가에 기계화수목형 재배법을 보급하고 타격방식을 적용한 구기자 수확기를 이용하면 작업환경 개선과 노동력, 인건비 절감을 통한 영농규모의 확대 촉진 및 안정적인 영농 구조로 구기자 경쟁력 제고를 할 수 있을 것으로 판단되어진다.

• Korean Journal of Microbiology
• /
• v.20 no.3
• /
• pp.125-133
• /
• 1982

Mutational experiments were performed to imporve the cellulase productivity of Aspergillus phoenicis KU175, isolated from the southern part of Korea, as a high cellulase producer. By treatment ultra-violet light nad 4-NQO(4-Nitroquinoline-N-Oxide), mutation waas induced, and treatment ultra-violet light and 4-NQO (4-Nitroquinoline-N-Oxide), mutation was induced, and A.phoenicis KU175-115 was finally selected for its highest avicelase production. Avicelase production of the mutant was increased about 2 times compared with those of the wild strain. However, activities of other hydrolytic enzymes, such as amylase, protease and nuclease, of the mutant strain didn't show a marked difference compared with those of the nuclease, of the mutant strain didn't show a marked difference compared with the wild strain, except slight increase in ribonuclease activity and slight decrease in glucoamylase activity. Avicelases from the mutant strain selected were purified from wheat bran culture by successive salting out, followed by dialysis and column chromatography, and their charcteristics were compared with thosw of the wild strain. Avicelase was separated into three peaks in the mutant strain as well as in the case of wild strain. Avicelase II activity of the mutant strain was prominently higher than that of the wild strain, while avicelase I and III activities of those were equivalent. The optimal pH ranges and stability of avicelase II from the mutant strain were pH4-5 and pH3.5-6.0, respectively, as well as in the case of the wild strain. The optimal temperature and thermal stability of avicelase II from the mutant strain were $40{\sim}50^{\circ}C\;and\;20{\sim}55^{\circ}C$, respectively. These results were same as those of the wild strain. By the using of Eadie-Hofastee plot, $K_m\;and\;V_{max}$ of avicelase II from the mutant and the wild strain were calculated to be 2.29mg/ml and $4.84{\mu}g$ reducing sugar as glucose per min equally, from the line fitted to the data by the least square method. Activity of avicelase II from the mutant strain was slightly activated by $Mg^{++}\;but\;inhibited\;by\;Cu^{++}, \;Mn^{++}\;and\;Zn^{++}$, as well as in the case of the wild strain. Therefore, it was concluded that the mutant didn't induce the formation of another avicelase isozyme, or the changes in the properties of avicelase, but induce the changes in the productively of the same avicelase II by the action of regulatory gane.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.61-61
• /
• 2001

The main goal of this study was to produce transgenic piglets by the method of injection of sperm-mediated exogenous DNA. Spermatozoa (1$\times$106 sperm of final concentration) obtained from caudal epididymis were mixed with pBC1-hEPO (20 ng/${mu}ell$) or pcDNA3 LAC Z (20 ng/${mu}ell$), and followed by electroporation (500 V, 25 ㎌). Matured oocytes having the first polar body and dense cytoplasm were selected and centrifuged at 12,000g for 6 min. After sperm injection, the oocytes were activated electrically (1.7 ㎸/cm, 30 $\mu$ sec, single pulse) in 0.3 M mannitol solution. Eggs injected sperm were cultured in NCSU 23 medium (0.4% BSA) at 39$^{\circ}C$, 5% $CO_2$ in air for 192 h. This study were comprised 3 experiments. Experiment 1 compared the developmental efficiencies between the sperm-injected oocytes (Group 1) and further activated electrically (Group 2). Experiment 2 compared the expression of pcDNA3 LAC Z in the embryos produced by Group 1 and Group 2. Finally, experiment 3 carried out transfer of embryos (1-8 cell stage) transfected with pBC1 -hEPO into surrogate recipients synchronized by injection of combination of PG600 with hCG. The rates of cleavage and development into blastocyst stage in Group 2 were significantly higher than those of Group 1 (71.3% and 28.1% vs. 43.3% and 10.3%, respectively, p<0.05). Thirty (24.2%) out of 124 embryos analyzed in Group 2 were positive by X-gal. Similarly, in Group 1, 16.3% (8/49) were positive. After transfer of 789 embryos to 7 recipient gilts, three out of them examined by ultrasound became pregnant. One recipient is in day 50 pregnancy. On day 54 of gestation, two were carried out uterotomy in order to confirm the pregnancy One had 7 and another had 2 fetuses. We conclude that injection of sperm-mediated gene transfer will be used as a valuable tool for the production of transgenic piglets.

• Journal of the Korean Chemical Society
• /
• v.54 no.3
• /
• pp.323-328
• /
• 2010

In this work, an intention to synthesize the carbon molecular sieve (CMS) with ideal sieving properties from palm shell has been attempted. The process includes three main stages: carbonization, carbon dioxide activation and polymer deposition using polyfurfuryl alcohols. Palm shell based activated carbon (AC) produced by carbon dioxide activation was used as raw material in synthesis of CMS. After preparing palm shell based AC, optimum concentration ratio of furfuryl alcohols and formaldehyde to AC for CMS synthesis was obtained in this study. Deposition of polyfurfuryl alcohols on the palm shell based AC was then carried out prior to carbonization. These polymer deposited AC was subjected to carbonization at $700-900^{\circ}C$ under inert condition. All the microporous materials were analyzed using micromeritics ASAP/2020. The results show that optimum concentration ratio of furfuryl alcohol and formaldehyde to AC is 1:2.5. The micropore with pore width less than 7 ${\AA}$ was formed on the polymer deposited AC at $700^{\circ}C$, $800^{\circ}C$ and $900^{\circ}C$ for 1.5 hours. Carbonization temperature at $900^{\circ}C$ for 1.5 hours was found to be optimum for CMS synthesis. The CMS produced under this condition has pore width of 5.884 ${\AA}$.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.5
• /
• pp.321-327
• /
• 2017

PURPOSE. The aim of this study was to investigate dental arch dimensions and to classify arch shape in Korean young adults. MATERIALS AND METHODS. The sample included 50 Koreans with age ranging from 24 to 32 years. Maxillary and mandibular casts were fabricated using irreversible hydrocolloid and type III dental stones. Incisor-canine distance, $incisor-1^{st}$ molar distance, $incisor-2^{nd}$ molar distance, intercanine distance, $inter-1^{st}$ molar distance, and $inter-2^{nd}$ molar distance in both the maxillary and mandibular arch were measured using a three-dimensional measuring device. The dental arch was classified into three groups using five ratios from the measured values by the K-means clustering method. The data were analyzed with one-way analysis of variance. RESULTS. Arch lengths (IM2D, $incisal-2^{nd}$ molar distance) were 44.13 mm in the maxilla and 40.40 mm in the mandible. Arch widths (M2W, inter $2^{nd}$ molar width) were 64.12 mm in the maxilla and 56.37 mm in the mandible. Distribution of the dental arch form was mostly ovoid shape (maxilla 52% and mandible 56%), followed by the V-shape and the U-shape. The arch width for the U-shape was broader than for the other forms. CONCLUSION. This study establishes new reference data for dental arch dimensions for young Korean adults. The most common arch form is the ovoid type in the maxilla and mandible of Koreans. Clinicians should be aware of these references and classify arch type before and during their dental treatment for effective and harmonized results in Koreans.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.95-103
• /
• 2011

We have investigated pretreatment of waste wood using milling refinery combined with poping method, which can save energy for pretreatment and enzyme loading for enzymatic hydrolysis. The chemical analysis of holocellulose of non and popping treated waste wood showed 65.9% and 58.8%, and the lignin, organic extracts and ash were increased by 3%, 4% and 0.7% after pretreatment, respectively. The reducing sugar yields of pretreated waste wood were increased four times more than non-pretreated one and the synergistic effect of cellulase and xylanase were evaluated compare with individual enzyme treatment. Especially, enzyme cocktail (cellulase 50 U and xylanase 50 U) treatment was very efficient in 1% substrate (50 mg). Also, glucose and xylose conversion rate of pretreated waste wood by GC analysis were 45.9% and 38.7%, respectively.

• Korean Journal of Food Science and Technology
• /
• v.30 no.6
• /
• pp.1432-1438
• /
• 1998

The gamma-radiation sensitivity of eight kinds of pathogenic bacteria related to beef was investigated in frozen cells $(-18^{\circ}C)$ with 0.1 M phosphate buffer and inoculated cells in beef. In frozen cells, D10 values of pathogenic bacteria related to beef were $0.07{\sim}0.69$ kGy, and inactivation factors were $2.90{\sim}42.86$ at the radiation doses of $2{\sim}3$ kGy. Beef was inoculated with Escherichia coli, Pseudomonas aeruginosa, Salmonella typhimurium, Enterobacter aerogenes, Vibrio parahaemolyticus, Staphylococcus aureus, Listeria monocytogenes, and Aeromonas hydrophila. Inoculated beef samples were packaged in air and irradiated at 0.005 to 3.0 kGy. Ninety percent of the viable pathogenic bacteria in beef was eliminated by doses of $0.1{\sim}0.61$ kGy at room temperature, and the inactivation factors were $3.28{\sim}30.0$ kGy at the radiation doses of $2{\sim}3$ kGy. Therefore, irradiation is considered to be an effective method to control pathogenic bacteria in beef.