• Composites Research
• /
• v.20 no.1
• /
• pp.23-31
• /
• 2007

In order to improve the mechanical properties of jute fiber/polypropylene(PP) composites, the property change with the addition of a coupling agent, maleic anhydride polypropylene(MAPP) was examined experimentally. The maleated coupler acts as an intermediate to chemically connect the polar nature of the fiber and non-polar nature of the polyolefin polymer resin. Furthermore, the decrease in viscosity of the resin which results from the melting point reduction by the MAPP, leads to an increase of contact area with the fiber interface. We discussed the improvement of the PP composite blend of the maleated coupler with the 80mm jute long fiber mat in conjunction with the change of physical parameters in the thermoplastic resin. We confirmed the extent of contribution to the mechanical physical enhancement by using the following parameters: melting flow index(MI) and viscosity, contact angle, thickness of the composite, interfacial shear strength and morphology observation etc. Especially it was observed that the MI and viscosity, MAPP mixture had a very strong relationship with the tensile and flexural strength and modulus, and interfacial shear strength(IFSS).

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.1
• /
• pp.36-41
• /
• 2013

In this paper time series wave data are simulated using wave spectrum with random phases of the wave signal. The simulated wave signals are used to study the effect of the sampling rate on the ocean wave characteristics. Effect of sampling rate on wave data which include extreme wave such as freak waves are examined and various wave characteristics including abnormality index (AI), kurtosis of wave profile and maximum wave height are examined. Various wave heights are decreased as the sampling rate decreases. The zero-th moment of the wave spectrum does not affect much on the sampling rate but the second moment are greately affected on the sampling rate. The error due to the sampling rate is decreases as the wave period increases. The error in significant wave height based on the wave spectrum $H_s$ is smaller than that on the time domain method $H_{1/3}$. AI index and kurtosis of wave profile do not deviate much from the exact date as long as the sampling rate is greater than 1 Hz. Ocean wave measurement with the sampling frequency higher than 1 Hz will result the error less than 5% in estimating the height of extreme waves.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.4
• /
• pp.46-54
• /
• 1998

In this paper, the erect of notch geometries on dynamic stress concentration was investigated by using the dynamic photoelasticity and the drop weight loading system Dynamic stress fields arisen by elastic wave through the loading system around various types of notch geometries were captured by using $10^6/sec$ frame rate Cranz-Shardin camera system with 12 photographic frames. We found that dynamic stress concentrations around the notch tip and comer were highly dependent on the change in notch geometries. The elders of dynamic stress singularity ware determined with respect to varying geometries of notches and we explained dynamic stress concentration in terms of the orders of dynamic stress singularity.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.43-47
• /
• 2006

Since the sheet metal forming of Mg alloy is performing at elevated temperature, the effect of process conditions related with the forming temperature is very important factor. Therefore, the investigation for process variables is necessary to design the tools and process conditions. In this study, the effects of process variables were studied by the experimental and FE analysis using the square cup deep drawing. The temperature, forming speed, and lubricant condition were investigated. When forming temperature was $250^{\circ}C$, speed forming was low, and teflon sheet was used as lubricant, the formed parts were good without defects.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.10a
• /
• pp.159-162
• /
• 2006

In the microfluidics devices the most important thing is mixing efficiency of various fluids. In this study a newly designed mixer is proposed to enhance the mixing effect with the purpose to apply it to microchannel mixing in a short future. This design is composed of a channel with cross baffles periodically arranged on the both bottom and top surfaces of the channel. To obtain the flow patterns, the numerical computation was performed by using a commercial code, ANSYS CFX 10.0. To evaluate the mixing performance, we computed Lyapunov exponent and obtained Poincare sections.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.205-208
• /
• 2008

The wind load on building surface is numerically investigated. The geometry of target building is a square cross section and aspect ratio (height (H) to width (d)) is 6. On building surface, the pressure was measured, compared to obtained value from numerical simulation. The numerical simulations were done using URANS with three different turbulence models such as v2-f model, k-${\omega}$model, and k-${\varepsilon}$ model, respectively. The v2-f model showed the best agreement with experimental data in simulating mean pressure coefficients on front, rear and side surface. But unsteady characteristics of pressure history measured on surface is shown a discrepancy between experiment and numerical simulation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.203-206
• /
• 2004

Copper-based bulk amorphous alloy composite was synthesized by using the copper-coated $Cu_{54}Ni_{6}Zr_{22}Ti_{18}$ amorphous powder which was obtained by argon gas atomization. The amorphous powder having a super-cooled liquid region of 53 K was coated by crystalline copper by electroless coating. The consolidation was carried out by manufacturing performs and by the subsequent warm extrusion at 743 K. During the compression test at the room temperature, the composite containing a large fraction of crystalline copper displayed a larger plastic strain after yielding. FEM simulation revealed change in fracture modes in the composites depending on the amount of crystalline copper in the composites.

• Electronics and Telecommunications Trends
• /
• v.37 no.5
• /
• pp.62-69
• /
• 2022

In a situation where applications determine business competitiveness, they cannot respond to varying customer requirements without the cloud's flexibility and scalability. Companies have begun seeking ways to enjoy the advantages of the cloud fully, and the concept of "Cloud Native" is emerging as a solution to the problem. Cloud Native is now a target of interest in the market. Microservice and serverless functions can play a vital role in cloud-native architecture. Microservice arranges applications into various independent services, each offering certain functionality through mutual networking. eBPF is attracting attention as a cloud-native networking solution that quickly supports microservice features that repeat creation/deletion. This study identifies the characteristics of eBPF-based networking and evaluates cloud-native networking and secure networking using eBPF.

• Korean Journal of Environment and Ecology
• /
• v.26 no.5
• /
• pp.758-769
• /
• 2012

This study is aimed at analyzing the structural characteristics of vegetation in the Sangwonsa(Temple) valley, Yongmunsan(Mt.), and to collect basic data for research of large mountains which are located in the temperate, central region. The research on the entire vegetation struc trees are distributed over a wide area, accounting for 75.0% of theture of Sangwonsa(Temple) valley observed that oak total vegetation in the area. We examined 17 plots(unit area: $400m^2$) in the deciduous forest, dividing the trees into 5 community types based on the average important value. The 5 community types are as follows: A mixed dominant group of Carpinus laxiflora and Quercus serrata, a mixed dominant group of Quercus serrata and Quercus variabilis, a mixed dominant group of Quercus mongolica and Quercus serrata, a dominant group of Quercus serrata, a dominant group of Acer pictum supsp. mono. It is expected that the oak trees competing with Carpinus laxiflora and Acer pictum supsp. mono would flourish in a deciduous forest. The Shannon's species diversity index(H') was 0.3708~1.3083.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.3
• /
• pp.453-461
• /
• 2023

This study was to verify the skin safety of Coptis Japonica extract(CJE) -containing cosmetics by patching them on sensitive skin and checking its stimulating level. 32 subjects diagnosed with sensitive skin by the result of the lactic acid injury test, were subjected to 20 ㎕ of solubilized essence mixed with 2% CJE on the test subjects' back and closed patched for 24 hours. No stimulus reactions were found by bare eyes and scored 0 stimulus figure points after they were taken off in 30 minutes, 24 hours, and 48 hours. Coptis japonica's medical efficacies such as antioxidant, and anti-inflammatory are expectable to be used as functional cosmetics, and this research would be the foundation of further research into its cosmetical usage.