• 한국농림기상학회지
• /
• 제3권1호
• /
• pp.30-36
• /
• 2001

우리나라에 자생하고 있는 흑오미자 유전자원을 보존하고 육성하기 위하여, 제주도 한라산이라는 격리된 지역에 천연분포하고 있는 3개 집단을 대상으로 동위 효소분석에 의한 유전변이를 조사하였다. 1. 흑오미자 자생지 3개 집단의 4개의 동위효소에 대한 대립유전자 빈도와 분포는 6개의 유전자좌 가운데 Mdh-l과 Pgi-l을 제외한 모든 유전자좌에서 2개 이상의 대립유전자가 관측되어 Idh, Mdh-2, Mnr, Pgi-2에서 다형성을 보였다. Pgi-2를 제외한 Idh, Mdh-2, Pgi-l, Mdh-1, Mnr 유전자좌에서 동일한 대립유전자가 빈도가 가장 높은 주대립유전자로 나타났다. 2. 유전자좌당 대립유전자수(A/L)는 평균 1.7개의 값을 보였으며, 95%( $P_{95}$ ) 및 99%( $P_{99}$) 수준에서의 다형적 유전자좌의 비율은 38.9%와 50%, 평균 이형접합도의 관측치( $H_{0}$$^{./}$)와 기대치( $H_{e}$ )는 각각 0.141과 0.147로 나타났다. 흑오미자와 같이 분포구역이 매우 제한적이거나 멸종위기에 처한 식물종들은 유전변이량이 매우 적게 나타나는데 비해 흑오미자는 다소 많은 유전변이량을 보유하고 있는 것으로 나타났다. 3. 유전변이의 대부분이 집단 간 차이보다 집단내 개체간의 차이(92.6%)로 나타났으며, Wright의 F분석결과, $F_{IS}$ 및 $F_{IT}$ 값 모두 0에 가까운 값을 나타내어 흑오미자 집단이 Hardy-Weinberg 평형 상태에 근접해 있는 것으로 나타났다.다.

• 한국수산과학회지
• /
• 제47권1호
• /
• pp.52-58
• /
• 2014

Morphological and genetic variation of two populations of Platichthys stellatus were investigated based on 30 individuals each, collected from Uljin (seedling release area) and Pohang (control) in Korea. Morphological analyses demonstrated that the two populations of P. stellatus were well distinguishable in body color of the blind side and fin shape. Mitochondrial DNA control region analysis indicated no significant differences between the two populations ($F_{ST}=-0.00849$, P>0.05). We also analyzed microsatellite DNA loci of the two populations using six markers. Observed heterozygosity ($H_O$) and expected heterozygosity ($H_E$) were 0.550 and 0.592, respectively, in P. stellatus from Uljin, but 0.700 and 0.737 in P. stellatus from Pohang. An index of differentiation in genetic structure revealed significant differences between the two populations ($F_{ST}=0.0208$, P<0.05). Our results suggest that the Uljin population may be comprised of released P. stellatus, whereas the Pohang population may be wild P. stellatus, highlighting the necessity of continuous monitoring of the two populations.

• Nuclear Engineering and Technology
• /
• 제36권1호
• /
• pp.47-52
• /
• 2004

Recently, a new sintered pellet-type LiF:Mg,Cu,Na,Si TL detector which has a high sensitivity and good reusability, named KLT-300(KAERI LiF:Mg,Cu,Na,Si TL detector), was developed by the variation of the dopants concentrations and the parameters of the preparation procedure at KAERI (Korea Atomic Energy Research Institute). In this study, the thermoluminescent characteristics of the newly developed TL detectors were investigated. The sensitivity of the TL detector was compared with that of the TLD-100 by light integration. The dose linearity of the detector was tested from $10^{-6}$ Gy up to 30 Gy. The dose response was very linear up to 10 Gy and a sublinear response was observed at higher doses. The energy response of the detector was studied for photon energies from 20 keV to 662 keV. The result shows that a maximum response of 1.004 at 53 keV and a minimum response of 0.825 at 20 keV were observed. The reproducibility study for the TL detector was also carried out. The coefficients of variation for each detector separately did not exceed 0.016, and for all the 10 detectors collectively was 0.0054. Lower limit of detection for the detector was investigated at 70 nGy by the Harshaw 4500 TLD Reader and the residual signal of the TL detector was found to be $0.57\%$.

• 한국작물학회지
• /
• 제36권6호
• /
• pp.485-495
• /
• 1991

트리티케일 품존육성의 기초자료를 제공하기위해, 6배체 트리티케일인 신기호밀(TC)과 2배체 호밀 2개 품종 등을 교잡한 잡종 초기세대의 교잡친화성 및 세포유전학적 양상을 검토한 시험결과를 요약하면 다음과 같다 1 신기호밀 (TC)과 2배체 호밀의 교잡에서 교잡율은 조합에 따라 39.3～41.6%로, 평균 40.5%로 나타났다. 그러나 이들의 역교배에서는(2배체 호밀$\times$신기호밀) 교잡율이 극히 낮았다. 트리티케일/2배체 호밀의 F$_1$에 호밀을 화분친으로 교잡(F$_1$/P$_2$)했을 때는 평균 5.47%, TC를 화분친으로(F$_1$/P$_1$) 했을때는 평균 2.69%의 교잡율을 보였고, F$_2$는 0.38% 였다. 모든 단교배 F$_1$ 종자의 발아율은 80% 이상이었으며 F$_1$/P$_2$ 세대는 평균 65.9%, F$_1$/P$_1$은 59.5%, F$_2$는 40.8%로 세대별로 차이가 있었다. 트리티케일과 호밀의 F$_1$ 화분 임성은 평균18.7%로 나타났다. 트리티케일과 호밀의 F$_1$에서 1가 염색체 12.6, 2가 염색체 6.94, 3가 염색체 0.53개였다. 트리티케일/호밀(TC/R)에서는 F$_1$의 염색체수는 28개였고 F$_2$는 21～34, F$_1$/P$_1$은 33～38개의 분포를 보였고 F$_1$/P$_2$은 20～21개 염색체를 갖는 개체의 빈도가 높았다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권2호
• /
• pp.150-158
• /
• 2011

Present study aims to investigate the influence of relative breakwater width W/L (W=width of breakwater, L=wavelength), wave steepness $H_i/gT^2$ (Hi=incident wave height, T=wave period) and relative wave height d/W (d=water depth) on forces in the moorings of horizontal interlaced multi-layered moored floating pipe breakwater (HIMMFPB) model. Studies were conducted on scaled down physical models having three layers of Poly Vinyl Chloride (PVC) pipes, wave steepness $H_i/gT^2$ varying from 0.063 to 0.849, relative width W/L varying from 0.4 to 2.65 and relative spacing S/D=2 (S=horizontal centre-to-centre spacing of pipes, D=diameter of pipes). Peak mooring forces were also measured and data collected is analyzed by plotting non-dimensional graphs depicting variation of $f_s/{\gamma}W^2$ ($f_s$=Sea side Mooring force, ${\gamma}$=specific weight of water) & $f_l/{\gamma}W^2$ ($f_l$=Lee side Mooring force) with $H_i/gT^2$ for d/W varying from 0.082 to 0.276 and also variation of $f_s/{\gamma}W^2$ and $f_l/{\gamma}W^2$ with W/L for $H_i$/d varying from 0.06 to 0.400.

• 대한수학회지
• /
• 제34권3호
• /
• pp.581-598
• /
• 1997

This paper is concerned with the impulsive control problem $$ \dot{x}(t) = f(t, x) + g(t, x)\dot{u}(t), t \in [0, T], x(0) = \overline{x}, $$ where u is a possibly discontinuous control function of bounded variation, $f : R \times R^n \mapsto R^n$ is a bounded and Lipschitz continuous function, and $g : R \times R^n \mapsto R^n$ is continuously differentiable w.r.t. the variable x and satisfies $\mid$g(t,\cdot) - g(s,\cdot)$\mid$ \leq \phi(t) - \phi(s)$, for some increasing function $\phi$ and every s < t. We show that the map $u \mapsto x_u$ is Lipschitz continuous when u ranges in the set of step functions whose total variations are uniformly bounded, where $x_u$ is the solution of the impulsive control system corresponding to u. We also define the generalized solution of the impulsive control system corresponding to a measurable control functin of bounded variation.

• 말소리와 음성과학
• /
• 제7권1호
• /
• pp.107-116
• /
• 2015

The present experiment investigated the effect of word length on the length of f0 intervals for North Kyungsang children. In order to find out the lengths of the f0 intervals, the f0 values at the midpoints of vowels in words were measured. F0 estimates were computed as intervals consistent with the logarithmic scale corresponding to the number of syllables in the words. The results indicated that the mean f0 intervals in words of different lengths showed a significant difference for the HH in HH vs. HHL and the LH in LH vs. LLH for North Kyungsang children. Adult speakers from the North Kyungsang region significantly differed only within the HH in HH vs. HHL. Adult speakers made a noticeable contribution in this characteristic from the children. The result of the adult study was presented to confirm whether the children used a North Kyungsang dialect. With respect to individual speaker differences, the North Kyungsang children showed more or less consistent patterns in quantile-quantile plots for the HH vs. HHL, but for the HL vs. LHL and LH vs. LLH, there were more variations than for the HH vs. HHL. The individual speakers' variation was the largest for the HL vs. LHL and the smallest for HH vs. HHL. Considering these results, the effect of word length on f0 intervals tended to show pitch accent-type-specific characteristics in the process of prosodic acquisition.

• 한국건설순환자원학회논문집
• /
• 제6권2호
• /
• pp.138-145
• /
• 2018

이 연구에서는 UHPFRC의 주요 재료특성관련 설계변수로써 UHPFRC의 인장강도의 변동, 탄성계수의 변동 및 인장철근비의 변동이 UHPFRC의 휨강도에 미치는 영향을 해석적으로 파악하고자 하였다. UHPFRC의 인장강도 변동량이 ${\pm}20%$일 때 휨강도 예측 결과는 ${\pm}8{\sim}9%$ 수준의 휨강도 변동을 나타낸다. 수치 해석 결과는 UHPFRC의 인장강도의 변동이 휨강도 예측 수준에 큰 영향을 미치는 것을 나타낸다. 탄성계수 변동에 따른 휨모멘트-곡률 곡선 예측 결과는 곡선의 기울기, 즉 휨강성의 차이를 나타내고, 휨강도는 뚜렷한 차이를 나타내지 않는다. 한편, 철근항복강도가 400MPa인 경우, 철근비가 0.5%일 때에 비해 철근비가 1.0, 1.5 및 2.0%일 때 SC120f의 휨강도는 각각 30, 67 및 99%만큼 증가한다. 또한, 철근비가 0.5%일 때에 비해 철근비가 1.0, 1.5 및 2.0%일 때 SC150f의 휨강도는 각각 29, 57 및 86%만큼 증가하고, SC180f의 휨강도는 각각 25, 50 및 70%만큼 증가하였다. 따라서 철근비 변동에 따라 UHPFRC의 휨강도는 큰 영향을 받음을 나타내고, 콘크리트 설계기준 압축강도가 클수록 철근비 증가에 따른 휨강도 증가율은 더 작음을 나타낸다.

• 한국산업보건학회지
• /
• 제3권1호
• /
• pp.100-109
• /
• 1993

This study was performed to evaluate the asbestos exposure levels and variations in textile, brake lining manufacturing and slate manufacturing industries. For this study, fifteen plants of brake lining manufacturing industry, 7 plants of textile industry, and 2 plants of slate manufacturing industry were selected and surveyed. Geometric means (GMs) of airborne asbestos concentrations in textile, brake lining manufacturing, and slate manufacturing industries were 1.42 f/cc(0.07-6.1O f/cc), 0.19 f/cc(<0.01-2.67 f/cc) and 0.08 f/cc(0.02-0.67 f/cc), respectively. In textile industry overall GMs of airborne asbestos concentrations in plants with less than 50 workers and in plants with more than 50 workers were 1.60 f/cc and 0.3 f/cc, respectively. Therefore, the size of plant showed some difference in the airborne asbestos concentrations. Three out of 7(42.9%) exceed the Korean standard, 2 f/cc, and every plant exceed the USA standard, 0.2 f/cc of the OSHA-Permissible Exposure Level(OSHA-PEL). Especially, one plant showed the highest average concentration of 2.87 f/cc. In brake lining manufacturing industry, the plants with less than 50 workers showed 0.22 f/cc. The plants with more than 50 workers showed 0.18 f/cc. All plants showed the exposure level below the Korean standard. Five of 15 (33.3%) were above the OSHA-PEL. One plant showed the highest average concentraton of 0.84 f/cc. In slate manufacturing industry, the average exposure level was 0.08 f/cc, and all of the plants were below the Korean standard and the OSHA-PEL.

• Transactions on Electrical and Electronic Materials
• /
• 제9권1호
• /
• pp.20-23
• /
• 2008

Organic light-emitting diodes (OLEDs) are attractive because of possible application in display with low-operating voltage, low-power consumption, self-emission and capability of multicolor emission by the selection of emissive materials. To investigated the optical effects, we studied the electrical and optical characteristics due to thickness variation of electron injection materials LiF on organic light-emitting diodes in the ITO (indium-tin-oxide)/N,N'-diphenyl-N, N'-bis(3-methyphenyl)-1,1'-biphenyl-4,4'-diamine(TPD)/tris(8-hydroxyquinoline) aluminum $(Alq_3)/LiF$ layer/Al device. We maintained the thicknesses of TPD and $Alq_3$ layers at 40 nm and 60 nm, respectively. The deposition rates of TPD and $Alq_3$ were in the $1.5{\AA}/s$ under a base pressure of $5{\times}10^{-6}$ Torr. It was found that luminance and luminous efficiency of the device with 0.7 nm LiF layer improve 25 times and 7 times than the device without the LiF layer, respectively.