• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06d
• /
• pp.149-152
• /
• 2011

본 논문에서는 무선 메쉬 네트워크에서 H.264 비디오 코딩을 이용한 대화형 멀티미디어 전송시 서비스 품질을 향상시키기 위한 Early Drop 기법을 제안한다. Early Drop 기법은 비디오 프레임의 재생시간과 H.264로 부호화된 비디오 프레임의 중요도를 고려하여 네트워크 혼잡 시 발생하는 큐잉 지연과 큐 오버플로우로 인한 비디오 서비스 품질 저하를 효과적으로 개선하기 위해 개발되었다. 계층간 최적화(Cross-Layer)기법을 사용하여 각 비디오 패킷 별로 재생시간까지 남은 시간을 의미하는 delay budget을 할당하고 전송 중 재생시간 초과로 인해 목적지 노드에서 재생되지 못하는 비디오 패킷을 전송 초기 손실 시켜 무선대역폭 낭비와 전송 지연을 최소화 한다. 또한, H.264 비디오 프레임 종류별 중요도를 고려하여 차별화 된 delay budget을 할당해 중요도가 높은 비디오 프레임의 전송을 보장하여 비디오 전송 품질을 높인다. 성능 검증을 통해 네트워크 혼잡 시 Early Drop 기법은 기존에 제안된 IEEE 802.11e 기반의 H.264 비디오 전송기법과 비교하여 전송지연과 프레임 손실률을 최소화해 향상된 비디오 품질을 보였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.569-570
• /
• 2007

본 논문에서는 대장균 먹이찾기(E. Coli Bacterial Foraging)를 최적화 기법에 도입한 사례로서 이를 이용하여 Nonconvex 배전용 경제급전 알고리즘(distribution economic dispatch: DED을 제안한다. 제안된 DED 알고리즘은 향후 지역이나 구역 발전사업자를 중심으로 배전계통운용시스템에 필요한 경제급전 알고리즘으로 활용 할 수 있다.

• Journal of Korea Multimedia Society
• /
• v.12 no.8
• /
• pp.1109-1119
• /
• 2009

WLAN(Wireless Local Area Network) standard is currently developing with increased wireless internet demand. Though existing IEEE 802.11e demonstrates that data rates exceed 54Mbps with assuring QoS(Quality of Service), wireless internet users can't be satisfied with real communication system. After IEEE 802.11e system, Study trends of IEEE 802.11n show two aspects, enhanced system throughput using aggregation among packets in MAC (Medium Access Control) layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PHY(Physical) layer. But, no one demonstrates IEEE 802.11n system performance results considering MAC and PHY connection. Therefore, this paper adapts MIMO in PHY layer for IEEE 802.11n system based on A-MPDU(Aggregation-MAC Protocol Data Unit) method in MAC layer considering MAC and PHY connection. SVD(Singular Value Decomposition) method with WLAN MIMO TGn Channel is used to analyze MIMO. Consequently, Simulation results show enhanced throughput and data rates compared to existing system. Also, We use Ns-2(Network Simulator-2) considering MAC and PHY connection for reality.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.1E
• /
• pp.37-44
• /
• 1994

A method for measuring the loudspeaker distortions at low frequencies without an anechoic is proposed. This method is based on the fact that the n-th harmonic distortion outside the enclosure is boosted by 40log n dB compared to that inside the enclosure. The applicable frequency range is extended by cancelling the effect of standing wave inside the enclosure. Causes of measurement error are also analyzed.

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.587-595
• /
• 2010

Spectrum sharing between wireless systems becomes a critical issue clue to emerging new technologies and spectrum shortage. Recently, IMT system has been allocated in the same frequency C band (3400-4200MHz) along with FSS services on co-primary basis which means that harmful. interference probability may be inspired. In this paper, to estimate the spectrum sharing between IMT and FSS systems, I propose the minimum separation distances as a sharing criterion of I/N=-10dB using the interference to noise ratio(I/N) received at the reference FSS earth station from IMT multiple base station. Especially, same results imply that I/N values can be greatly reduced with MMO SDMA interference mitigation technique of IMT base station so that FSS and IMT systems can co-exist in the sam e frequency with appropriate separation distance.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.147-155
• /
• 2010

A prediction model of resilient modulus($E_R$) was developed for recycled crushed-rock-soil mixtures. The evaluation of $E_R$, using the "orthodox" repeated loading tri-axial test, is not feasible for such a large-size gravelly material. An alternative method was proposed hereby using the subtle different modulus called nonlinear dynamic modulus. The prediction model was developed by utilizing in-situ measured shear modulus($G_{max}$) and its reduction curves of modeled materials using the large free-free resonant column test. A pilot evaluation of the model parameters was carried out for recycled crushed-rock-soil-mixture at a highway construction site near Gimcheon, Korea. The values of the model parameters($A_E,\;n_E,\;{\varepsilon}_r\;and\;{\alpha}$) were proposed as 9618, 0.47, 0.0135, and 0.8, respectively.

• Composites Research
• /
• v.17 no.4
• /
• pp.7-17
• /
• 2004

In this study, the effect of laminate thickness on the compressive behaviour of composite materials is investigated through systematic experimental work using the stacking sequences, $[O_4]_{ns},{\;}[45/0/-45/90]_{ns}$ and $[45_n/0_n/-45_n/90_n]_s$ (n=2 to 8). Parameters such as fibre volume fraction, void content, fibre waviness and interlaminar stresses, influencing compressive strength with increasing laminate thickness are also studied experimentally and theoretically. Furthermore the stacking sequence effects on failure strength of multidirectional laminates are examined. For this purpose, two different scaling techniques are used; (1) ply-level technique $[45_n/0_n/-45_n/90_n]s$ and (2) sublaminate level technique $[45/0/-45/90]_{ns}$. An apparent thickness effect existes in the lay-up with blocked plies, i.e. unidirectional specimens ($[O_4]_{ns}) and ply-level scaled multidirectional specimens ($[45_n/0_n/-45_n/90_n]_s$). Fibre waviness and void content are found to be main parameters contributing to the thickness effect on the compressive failure strength. However, the compressive strength of the sublaminate level scaled specimens ($[45/0/-45/90]_{ns}$) is almost unaffected regardless of the specimen thickness (since ply thickness remains constant). From the investigation of the stacking sequence effect, the strength values obtained from the sublaminate level scaled specimens are slightly higher than those obtained from the ply level scaled specimens. The reason for this effect is explained by the fibre waviness, void content, free edge effect and stress redistribution in blocked $0^{\circ}$ plies and unblocked $0^{\circ}$ plies. The measured failure strengths are compared with the predicted values.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.469-479
• /
• 2014

N-RTK(Network based RTK) methods are able to improve the accuracy of GNSS positioning results through modelling of the distance-dependent error sources(i.e. primarily the ionospheric and tropospheric delays and orbit errors). In this study, the comparison of the TTFF(Time-To-Fix-First ambiguity), accuracy and discrepancies in horizontal/vertical components of N-RTK methods(VRS and FKP) with the static GNSS at 20 Unified Control Stations covering Incheon metropolitan city area during solar storms(Solar cycle 24 period) were performed. The results showed that the best method, compared with the statics GNSS survey, is the VRS, followed by the FKP, but vertical components of both VRS and FKP were approximately two times bigger than horizontal components. The reason for this is considered as the ionospheric scintillation because of irregularities in electron density, and the tropospheric scintillation because of fluctuations on the refractive index take the place. When the TTFF at each station for each technique used, VRS gave shorter initialization time than FKP. The possible reasons for this result might be the inherent differences in principles, errors in characteristics of different correction networks, interpolating errors of FKP parameters according to the non-linear variation of the dispersive and non-dispersive errors at rover when considering both domestic mobile communication infra and the standardized high-compact data format for N-RTK. Also, those test results revealed degradation of positing accuracy, long initialization time, and sudden re-initialization, but more failures to resolve ambiguity during space weather events caused by Sunspot activity and solar flares.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.109-112
• /
• 2001

Recently, as demands for super-high speed broad band wireless multimedia service increase, variable researches to develop wireless LAN have been carried out. In this paper, we propose and analyze LS(Least Squares)-PSA(Pilot Symbol Assisted) equalizer which compensates for each subcarrier of different attenuations and phase response for OFDM(Orthogonal Frequency Division Multiplexing)-based indoor wireless LAN systems. The proposed equalizer enhances the $E_{b}$ $N_{o}$ performance of 3dB and 4dB at BER=10$^{-2}$ as compared with LS equalizer in AWGN channel and indoor wireless channel respectively..

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06b
• /
• pp.516-518
• /
• 2012

본 논문은 Particle Filtering과 계층적인 Boosting 알고리즘을 이용한 다중 객체 추적 기법을 제안한다. Particle Filtering을 이용하여 각 객체를 단일 객체로 추적하고 Boosting 기반의 데이터 연관 알고리즘을 사용하여 영상에서 움직이는 물체들을 추적한다. 본 제안한 알고리즘에서는 객체들의 이동경로 정확한 감지를 위해 Particle Filtering을 통해 각 객체가 움직이는 예측 정보를 이용하고, Boosting 알고리즘을 계측적인 형태로 설계함에 따라 데이터 물체의 추적 정확도를 높일 수 있도록 하였다.