• Journal of Yeungnam Medical Science
• /
• v.22 no.2
• /
• pp.166-182
• /
• 2005

Background: Cyclin-dependent kinase (CDK) inhibitors are family of molecules that regulate the cell cycle. The CDKN2, a CDK4 inhibitor, also called p16, has been implicated in human tumorigenesis. The CDKN2 inhibits the cyclin/CDK complexes which regulate the transition from G1 to S phase of cell cycle. There is a previous report that homozygous deletion of CDKN2 region on chromosome 9p21 was detected frequently in astrocytoma, glioma and osteosarcoma, less frequently in lung cancer, leukemia and ovarian cancer, but not detected in colon cancer and neuroblastoma. However, little is known about the relationship between CDKN2 and laryngeal cancer. Therefore this study was initiated to investigate the role of CDKN2 in human laryngeal squamous cell carcinoma development.1) Materials and methods: We used 5 human laryngeal carcinoma cell lines whether they have deletions or losses of CDKN2 gene expression by DNA-PCR or RT-PCR, respectively. We examined 8 fresh frozen human laryngeal cancer tissues to detect the loss of heterozygosity (LOH) of CDKN2. PCR was performed by using microsatellite markers of short arm of human chromosome 9 (D9S126, D9S144, D9S156, D9S161, D9S162, D9S166, D9S171, D9S200 and D9SIFNA). For informative cases, allelic loss was scored if the signal of one allele was significantly decreased in tumor DNA when compared to the same allele in normal DNA. Results: The CDKN2 DNA deletion was observed in 3 cell lines. The CDKN2 mRNA expression was observed in only one cell line, which was very weak. LOH was detected in 7 cases (87.5%). Conclusion: These results suggest that CDKN2 plays a role in the carcinogenesis of human laryngeal squamous cell carcinoma.

• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.29-39
• /
• 1999

An earlier study of the effect of rain found that the capacity of freeway systems was reduced, but did not address the effects of rain on the nature of traffic flows. Indeed, the substantial variation due to the intensity of adverse weather conditions is entirely rational so that its effects must be considered in freeway facility design. However, all of the data in Highway Capacity Manual(HCM) have come from ideal conditions. The primary objective of this study is to investigate the effect of rain on urban freeway traffic flows in Seoul. To do so, the relations between three key traffic variables(flow rates, speed, occupancy), their threshold values between congested and uncontested traffic flow regimes, and speed distribution were investigated. The traffic data from Olympic Expressway in Seoul were obtained from Imagine Detection System (Autoscope) with 30 seconds and 1 minute time periods. The slope of the regression line relating flow to occupancy in the uncongested regime decreases when it is raining. In essence, this result indicates that the average service flow rate (it may be interpreted as a capacity of freeway) is reduced as weather conditions deteriorate. The reduction is in the range between 10 and 20%, which agrees with the range proposed by 1994 US HCM. It is noteworthy that the service flow rates of inner lanes are relatively higher than those of other lanes. The average speed is also reduced in rainy day, but the flow-speed relationship and the threshold values of speed and occupancy (these are called critical speed and critical occupancy) are not very sensitive to the weather conditions.

• Korean Journal of Dental Materials
• /
• v.44 no.3
• /
• pp.207-216
• /
• 2017

The effect of cooling rate on precipitation hardening of a Pd-Cu-Ga-Zn metal-ceramic alloy during porcelain firing simulation was investigated and the following results were obtained. When the cooling rate was fast (Stage 0), the hardness of the alloy increased at each firing step and the high hardness value was maintained. When the cooling rate was slow (Stage 3), the hardness was the highest at the first stage of the firing, but the final hardness of the alloy after complete firing was lower. The increase in hardness of the specimens cooled at the cooling rate of Stage 0 after each firing step was caused by precipitation hardening. The decrease in hardness of the specimens cooled at the cooling rate of Stage 3 after each firing step was attributed to the coarsening of the spot-like precipitates formed in the matrix and plate-like precipitates. The matrix and the plate-like precipitates were composed of the $Pd_2(Cu,Ga,Zn)$ phase of CsCl-type, and the particle-like structure was composed of the Pd-rich ${\alpha}$-phase of face-centered cubic structure. Through the porcelain firing process, Cu, Ga, and Zn, which were dissolved in Pd-rich ${\alpha}$ particles, precipitated with Pd, resulting in the phase separation of the Pd-rich ${\alpha}$ particles into the Pd-rich ${\alpha}^{\prime}$ particles and ${\beta}^{\prime}$ precipitates composed of $Pd_2(Cu,Ga,Zn)$. These results suggested that the durability of the final prosthesis made of the Pd-Cu-Ga-Zn alloy can be improved when the cooling rate is fast during porcelain firing simulation.

• Journal of Radiation Industry
• /
• v.7 no.1
• /
• pp.7-14
• /
• 2013

In this study, we investigated the applicability of the photostimulated luminescence (PSL), thermoluminescence (TL) and electron spin resonance (ESR) methods for various foods. The analysed samples consist of 11 items including dried fruits (6 items) and mushrooms (5 items). To compare between non-irradiated and irradiated food, all samples were irradiated with $^{60}Co$ gamma-ray source. In PSL study, the photon counts of all the unirradiated sample were identified negative (lower than 700). The photon counts irradiated (1, 5, 10 kGy) dried date-palm, dried jujube and mushrooms (Auricularia auricula, Phellinus linteus and Sarcodon aspratus) showed positive (higher than 5,000) and the results for the other samples were negative or intermediate (>700 and >5,000). In TL analysis most of items can be applicable to detect irradiated foods because of showing TL ratio above 0.1. The glow curves by TL method were estimated in the range of $150{\sim}250^{\circ}C$ in irradiated samples. In ESR measurements, the intensity of ESR signal (single-line) increased as the dose of irradiation increased. In particular, the specific ESR signals of irradiation-induced radical were detected in dried papaya, dried date-palm, dried banana, dried pineapple and S. aspratus. According to the results, PSL, TL and ESR methods were successfully applied to detect the irradiated foods. It is concluded that PSL, TL and ESR methods are suitable for detection of irradiated samples and a combined method is recommendable for enhancing the reliability of detection results.

• Journal of agriculture & life science
• /
• v.46 no.5
• /
• pp.143-152
• /
• 2012

This study was performed to reduce the operating cost of a greenhouse by securing electric energy required for greenhouse operation. Therefore, it experimentally reviewed the performance analysis of photovoltaic system in terms of maximum amount of generated electric power based on the amount of horizontal solar radiation during daytime. That is to say, the maximum solar radiation at 300, 400, 500, 600, 700, 800 and 900 W. $m^{-2}$, respectively. The amount of momentary electric power of the photovoltaic system at any was about 970 W and we found that the momentary efficiency of the photovoltaic system that was used for this experiment was 97%. In the case of this system, we found that electric power will be generated when amount of horizontal solar radiation is more than 200 W. $m^{-2}$, at minimum. If the amount of horizontal solar radiation is increased, the maximum power generation is also increased. At that time, the maximum efficiencies were 30, 78, 86 and 90%, respectively. However, when the amount of insolation was about 800 W. $m^{-2}$, the maximum power generation tended to be lower than 700 W. $m^{-2}$. The efficiency which caused the maximum electric power was decreased to less than 97% of the momentary generated electric power. When the total amounts of horizontal solar radiation per day were 3.24, 8.10, 10, 90, 12.70, 14.33, 19.53 and $21.48MJ{\cdot}m^{-2}$ respectively, the total amounts of power energy were 0.03, 0.40, 3.60, 4.37, 4.71, 4.70 and 4.91 kWh. And it represented that the total amounts of power energy were either decreased or increased a bit on the border between some solar radiations. The temperature at the back of the array tended to be higher than the temperature at the front but it demonstrated an increased when the amount of solar radiation increased. In the case of this system, the performance of the module in terms of degradation has not been shown yet.

• Journal of Radiation Industry
• /
• v.7 no.1
• /
• pp.69-74
• /
• 2013

This study examined radiation detection characteristics of spices (cumin, caper and turmeric), other small fruits (hut-gae berry and boxthorn), and pollen extract product. Each samples were irradiated at dose of 1, 5, and 10 kGy and analyzed by the thermoluminescence (TL) and electron spin resonance (ESR) methods. To compare between non-irradiated and irradiated food, all samples were irradiated with $^{60}Co$ gamma-ray source. In TL analysis, most of samples could be applied to detect irradiated foods because of showing TL ratio above 0.1. The glow curves examined by TL method were estimated in the range of $150{\sim}250^{\circ}C$ in irradiated samples. In ESR measurements, the intensity of ESR signal (single-line) increased as the increase of irradiation dose. In particular, the specific ESR signals of irradiation-induced radical were detected in hut-gae berry and pollen extract product. As a results, it is considered that TL and ESR methods can be used to detect both hut-gae berry and pollen extract product. But cumin, caper, turmeric and boxthorn irradiated with gamma ray could be detected only by TL method. It is concluded that TL and ESR methods are suitable for detection of irradiated samples and a combined method is recommendable for enhancing the reliability of detection results.

• Korean Journal of Dental Materials
• /
• v.44 no.2
• /
• pp.151-161
• /
• 2017

The purpose of this study was to examine the effect of shade and thickness of resin-nanoceramic CAD-CAM block (RNB) on the microhardness of dual-cured resin cement, as well as to measure the number of photons transmitted through RNBs of different thicknesses and colors. One dual-cured resin cement was used to prepare resin cement specimens. Resin cement specimens were light-cured for 40 seconds through 3 shades (A1, A2, A3 in HT (high translucency) and LT (low translucency) respectively) and four thicknesses (1, 2, 3, 4 mm) of RNB specimens. Vickers microhardness measurements of resin cement specimens were performed using a Vickers hardness tester. The light transmission of RNB specimens was measured using a spectrometer (SpectroPro-500, Acton Research, Acton, MA, U.S.A.), and the translucency parameter was calculated using the CIEL*a*b* system. Data were statistically analyzed by ANOVA and Tukey's test. There was a significant decrease of microhardness of resin cement specimen with an overlay of 4 mm of RNB thickness and A3 shade in comparison to A1 and 1 mm, respectively (p<0.05). The translucency parameter values and light transmission of RNBs tested differed significantly, according to the thicknesses of the specimen (p<0.05). Light transmission is decreased with increase in the thicknesses of RNBs. Shade A1 transmitted more light than darker blocks. A decrease in microhardness of resin cement specimens was observed with increasing thickness and shade (A1 to A3) of RNBs.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.308-313
• /
• 2008

"Jeokjoong", a white winter wheat (Triticum aestivum L.) variety was developed from the cross "Keumkang"/"Tapdong". "Jeokjoong" is an awned, semi-dwarf and soft white winter wheat, similar to "Keumkang" (check variety). The heading and maturing date of "Jeokjoong" were similar to "Keumkang". Culm and spike length of "Jeokjoong" were 78 cm and 7.5 cm, similar to "Keumkang". "Jeokjoong" had lower test weight (800 g) and lower 1,000-grain weight (40.1 g) than "Keumkang" (811 g and 44.0 g, respectively). It had resistance to winter hardiness, wet-soil tolerance and lodging tolerance. "Jeokjoong" showed moderate to scab in test of specific character although "Keumkang" is susceptible to scab. "Jeokjoong" had lower flour yield (69.2%) and ash content (0.36%) than "Keumkang" (72.0% and 0.41%, respectively) and similar flour color to "Keumkang". It showed lower protein content (8.9%) and SDS-sedimentation volume (36.8 ml) and shorter mixograph mixing time (3.5 min) than "Keumkang" (11.0%, 59.7 ml and 4.5 min, respectively). Amylose content and pasting properties of "Jeokjoong" were similar to "Keumkang". "Jeokjoong" had softer and more elastic texture of cooked noodles than "Keumkang". Average yield of "Jeokjoong" in the regional adaptation yield trial was 6.19 MT ha-1 in upland and 5.33 MT/ha in paddy field, which was 19% and 16% higher than those of "Keumkang" (5.21 MT/ha and 4.58 MT/ha, respectively). "Jeokjoong" would be suitable for the area above the daily minimum temperature of $-10^{\circ}C$ in January in Korean peninsula.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.630-634
• /
• 2009

"Hyedang", a new covered cultivar derived from the crosses between "Suwon300" and "Haganemugi//CI08397/Haganemugi" developed at the Honam Agricultural Research Institute (HARI), NICS, RDA in 2007. The origin of "Hyedang" is "Iksan 407" (SB951033-B-B-B-72). The initial cross was made in 1995 and the selected line showed a high yield and good quality characteristics under yield trial test in 2004. "Iksan407" consistently performed well for three years (2005-2007) from the four locations of regional yield trial (RYT) in Korea and released as "Hyedang". The characteristics of "Hyedang" were the following: rate III growth habit, green leaf and stem, compact spike and with long rough awns. The heading date was April 25 in upland and April 17 in paddy field, which was 2 and 3 days earlier than that of check cultivar, "Olbori". The culm length was 80 cm which was 8 cm shorter than those of check cultivar. It showed spike length of 4.3 cm and 696 spikes per $m^2$, 51 grains per spike, 35.0 g of 1,000 grain weight and 704 g of test weight. It showed stronger winter hardiness and higher resistance to barley yellow mosaic virus (BaYMV) than those with check cultivar. It showed similar protein content and higher whiteness than those of the check cultivar and diastatic power was higher than that of Olbori. The average yield of the pearled grain in the RYT was $4.17ton\;ha^{-1}$ in upland and $4.27ton\;ha^{-1}$ in paddy field, which was 23% and 9% higher than that of the check cultivar, respectively. This cultivar would be suitable for the area above the daily minimum mean temperature of $-8^{\circ}C$ in January in Korean peninsula.

• Korean Journal of Breeding Science
• /
• v.41 no.1
• /
• pp.44-50
• /
• 2009

"Sukang", a winter wheat (Triticum aestivum L.) cultivar was developed by the National Institute of Crop Science, RDA. It was derived from the cross "Suwon266" / "Asakaze" during 1994. "Sukang" was evaluated as "Iksan312" in Advanced Yield Trial Test in 2005. It was tested in the regional yield trial test between 2006 and 2008. "Sukang" is an awned, semi-dwarf and hard winter wheat, similar to "Keumkang" (check cultivar). The heading and maturing date of "Sukang" were similar to "Keumkang". Culm and spike length of "Sukang" were 90 cm and 8.1 cm, longer culm length and similar spike length compared to "Keumkang" (80 cm and 7.9 cm, respectively). "Sukang" had similar test weight (819 g/L) and lower 1,000-grain weight (40.2 g) than "Keumkang" (813 g/L and 44.9 g, respectively). "Sukang" showed resistance to winter hardiness and pre-harvest sprouting, which lower withering rate on the high ridge (4.5%) and rate of pre-harvest sprouting (0.2%) than "Keumkang" (21.9% and 30.4%, respectively). "Sukang" had lower flour yield (71.1%) and higher ash content (0.45%) than "Keumkang" (74.1% and 0.42%, respectively). "Sukang" showed lower lightness (89.13) and higher yellowness (10.93) in flour color than "Keumkang" (90.02 and 9.28, respectively). It showed higher protein content (12.8%) and gluten content (11.1%) and lower SDS-sedimentation volume (56.8 ml) and mixing time of mixograph (2.6 min) than "Keumkang" (11.9%, 10.2%, 62.3 ml and 4.7 min, respectively). Fermentation properties, amylose content and pasting properties of "Sukang" were similar to "Keumkang". "Sukang" showed different compositions in high molecular weight glutenin subunits (HMW-GS, $2^{\ast}$, 13+16, 2+12) and puroindolines (pina-1b/pinb-1a) compared to "Keumkang" ($2^{\ast}$, 7+8, 5+10 in HMW-GS and Pina-1a/Pinb-1b in puroindolines, respectively). "Sukang" showed lower hardness (4.53 N) and similar springiness and cohesiveness of cooked noodles (0.94 and 0.63) compared to "Keumkang" (4.65 N, 0.93 and 0.64, respectively). Average yield of "Sukang" in the regional adaptation yield trial was 5.34 MT/ha in upland and 4.72 MT/ha in paddy field, which was 4% and 1% lower than those of "Keumkang" (5.55 MT/ha and 4.77 MT/ha, respectively). "Sukang" would be suitable for the area above $-10^{\circ}C$ of daily minimum temperature in January in Korean peninsula.