• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1553-1555
• /
• 1999

Recently, $SrBi_2Ta_2O_9$(SBT) and $Pb(ZrTi)O_3$(PZT) were much attracted as materials of capacitor for ferroelectric random access memory(FRAM) showing higher read/write speed, lower power consumption and nonvolartility. Bi-layered SBT thin film has appeared as the most prominent fatigue free and low operation voltage for use in nonvolatile memory. To highly integrate FRAM, SBT thin film should be etched. A lot of papers on SBT thin film and its characteristics have been studied. However, there are few reports about SBT thin film due to difficulty of etching. In order to investigate properties of etching of SBT thin film, SBT thin film was etched in $CF_4$/Ar gas plasma using magnetically enhanced inductively coupled plasma (MEICP) system. When $CF_4/(CF_4+Ar)$ is 0.1, etch rate of SBT thin film was $3300{\AA}/min$, and etch rate of Pt was $2495{\AA}/min$. Selectivities of SBT to Pt. $SiO_2$ and photoresist(PR) were 1.35, 0.6 and 0.89, respectively. With increasing $CF_4$ gas, etch rate of SBT thin film and $P_t$ decreased.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1621-1625
• /
• 2015

Power quality has always been a concern of power engineers. Certainly an argument can be successfully made that most parts of power engineering have the ultimate objective to improve power quality. AC motors were widely used in industrial and domestic applications. Generally, AC motors were of two types: Induction and Synchronous motors. In motor many parameters like different load cycling, switching, working in hot weather and unbalances creates harmonics which creates major reasons for temperature rise of the motors. Due to high peak value of voltage, harmonics can weaken insulation in cables, windings and capacitors and different electronic components. Higher value of harmonics increase the motor current and decrease the power factor which will reduce the life time of the motor and increase the overall rating of all electrical equipments. Harmonics reduction of all the motors in India will save more power. Coating of windings of the motor with nano fillers will reduce the amount of harmonics in the motor. Based on the previous project works, actions were taken to use the enamel filled with various nano fillers for the coating of the windings of the different AC motors. Ball mill method was used to convert the micro particles of Al₂O₃, SiO₂, TiO₂, ZrO₂ and ZnO into nano particles. SEM, TEM and XRD were used to augment the particle size of the powder. The synthesized nano powders were mixed with the enamel by using ultrasonic vibrator. Then the enamel mixed with the nano fillers was coated to the windings of the several AC motors. Harmonics were measured in terms of various indices like THD, VHD, CHD and DIN by using Harmonic analyzer. There are many other measures and indices to describe power quality, but none is applicable in all cases and in many instances, these indices may hide more than they show. Sometimes power quality indices were used as a basis of comparison and standardization. The efficiency of the motors was increased by 5 – 10 %. The thermal withstanding capacity of the motor was increased by 5º to 15º C. The harmonics of the motors were reduced by 10 – 50%.

• 자원환경지질
• /
• 제30권5호
• /
• pp.417-431
• /
• 1997

Characteristics of sedimentary rocks and enrichment of toxic elements in shale and coal from the Chungnam coal field were investigated based upon geochemistry of major, trace and rare earth elements. Shale and coal of the area are interbedded along the Traissic to the Jurassic Daedong Supergroup, which can be subdivided into grey shale, black shale and coal. The coal had been mined, however all the mines are abandonded due to the economic problems. The shale and coal are characterized by relatively low contents of $SiO_2$, and $Al_2O_3$ and high levels of loss-on-ignition (LOI), CaO and $Na_2O$ in comparison with the North American Shale Composite (NASC). Light rare earth elements (La, Ce, Yb and Lu) are highly enriched with the coal. Ratios of $Al_2O_3/Na_2O$ and $K_2O/Na_2O$ in shale and coal range from 30.0 to 351.8 and from 4.2 to 106.8, which have partly negative correlations against $SiO_2/Al_2O_3$ (1.24 to 6.06), respectively. Those are suggested that controls of mineral compositions in shale and coal can be due to substitution and migration of those elements by diagenesis and metamorphism. Shale and coal of the area may be deposited in terrestrial basin deduced from high C/S (39 to 895) and variable composition of organic carbon (0.39 to 18.40 wt.%) and low contents of reduced sulfur (0.01 to 0.05 wt.%). These shale and coal were originated from the high grade metamorphic and/or igneous rocks, and the rare earth elements of those rocks are slightly influenced with diagenesis and metamorphism on the basis of $Al_2O_3$ versus La, La against Ce, Zr versus Yb, the ratios of La/Ce (0.38 to 0.85) and Th/U (3.6 to 14.6). Characteristics of trace and rare earth elements as Co/Th (0.07 to 0.86), La/Sc (0.31 to 11.05), Se/Th (0.28 to 1.06), V/Ni (1.14 to 3.97), Cr/V (1.4 to 28.3), Ni/Co (2.12 to 8.00) and Zr/Hf (22.6~45.1) in the shale and coal argue for inefficient mixing of the simple source lithologies during sedimentation. These rocks also show much variation in $La_N/Yb_N$ (1.36 to 21.68), Th/Yb (3.5 to 20.0) and La/Th (0.31 to 7.89), and their origin is explained by derivation from a mixture of mainly acidic igneous and metamorphic rocks. Average concentrations in the shale and coal are As=7.2 and 7.5, Ba=913 and 974, Cr=500 and 145, Cu=20 and 26, Ni=38 and 35, Pb=30 and 36, and Zn=77 and 92 ppm, respectively, which are similar to those in the NASC. Average enrichment indices for major elements in the shale (0.79) and coal (0.77) are lower than those in the NASC. In addition, average enrichment index for rare earth elements in coal (2.39) is enriched rather than the shale (1.55). On the basis of the NASC, concentrations of minor and/or environmental toxic elements in the shale and coal were depleted of all the elements examined, excepting Cr, Pb, Rb and Th. Average enrichment indices of trace and/or potentially toxic elements (As, Cr, Cu, Ni, Pb, U and Zn) are 1.23 to 1.24 for shale and 1.06 to 1.22 for coal, respectively.

• 센서학회지
• /
• 제15권3호
• /
• pp.168-172
• /
• 2006

Potentiometric $CO_{2}$ sensors were fabricated using a NASICON ($Na_{1+x}Zr_{2}Si_{X}P_{3-X}O_{12}$, 1.8 < x < 2.4) thick film and auxiliary layers. The powder of a precursor of NASICON with high purity was synthesized by a sol-gel method. By using the NASICON paste, an electrolyte was prepared on the alumina substrate by screen printing and then sintered at $1000^{\circ}C$ for 4 h. A series of $Na_{2}CO_{3}-CaCO_{3}$ auxiliary phases were deposited on the Pt sensing electrode. The electromotive force (emf) values were linearly dependent on the logarithm of $CO_{2}$ concentration in the range between 1,000 and 10,000 ppm. The device attached with $Na_{2}CO_{3}-CaCO_{3}$ (1:2 in mol.%) showed good sensing properties in the low temperatures.

• 한국세라믹학회지
• /
• 제31권2호
• /
• pp.155-160
• /
• 1994

PZT ceramics substituted by La3+ and Nd3+ were fabricated according to the formula: [Pb1-x(La or Nd)x][Zr0.58Ti0.42]1-x/4$\square$x/4O3(x=0.00, 0.02, 0.05, 0.08, 0.15, 0.20). The crystal structure and microstructure were investigated by XRD and SEM. It was observed that the phase transitions among rhombohedral, tetragonal, and cubic symmetry occured as the substitutional quantity increased. Dielectric constant, dissipation factor and piezoelectric coefficient (d33), of each sample were measured. The dielectric properties were changed as the substitutional quanity of rare earth ion increased. These changes could be explained by crystal structure and compositional fluctuaction. Its d33 was higher at tetragonal region near to phase boundry between rhombohedral and tetragonal, which was explained by reorientation of domain wall.

• 한국광물학회지
• /
• 제18권4호통권46호
• /
• pp.277-288
• /
• 2005

함수유리질 암석인 진주암은 장기지역의 제3기 마이오세 화성쇄설성 퇴적층인 범곡리층군의 하부에서 산출된다. 진주암은 대개 그 하위의 장기층군과의 부정합면을 따라 단속적으로 분포하고, 시공간적으로 유문데사이트, 부석질 용결응회암과 밀접한 접촉 및 성인적 관계를 보이며 층상으로 산출된다. 이 진주암은 전형적인 진주암과 비교해 반정과 암편을 많이 함유하는 것이 특징이며 화학 조성상 낮은 $SiO_{2}$ 함유 수준($63.2\∼66.4\;wt\%$)을 이룬다. 반면에 함수량에 있어서는 진주암보다는 송지암에 가까운 함유 수준($3.2\∼7.8\;wt.\%$)을 나타낸다. 이 진주암과 그 주변의 화산암류 및 화성쇄설성 암석들 사이의 암석기재학적 특징들을 비교해 본 결과, 부석질 용결응회암과 유문데사이트가 진주암의 원암일 개연성을 지시하는 것으로 나타난다. 진주암과 그 원암들의 희유 및 희토류 원소들의 조성비(Zr/$TiO_{2}$ 대비 Nb/Y)와 야외에서의 산출상태는 이러한 해석을 뒷받침하며, 특히 진주암 내에 남아있는 기공 조직은 화산유리뿐만 아니라 부석 암편도 진주암질 유리의 주요 원물질이었을 것이라는 점을 강하게 지시한다. 이 진주암은 호소 환경에서 형성된 망해산층의 퇴적 단계에서 물과 암석 간에 완만하게 진행된 수화$\cdot$변질 형식의 속성작용에 의해서 생성된 것으로 여겨진다. 진주암화 과정 동안에 $SiO_{2}$와 알칼리는 일률적으로 감소하는 경향을 나타낸다. 이 진주암은 속성작용에 의해서 2차적으로 형성되었고 횡적 연장성도 결여되기 때문에, 이 암층에 의거한 기존의 범곡리층군의 층서 체계는 수정되어야 할 것이다.실험을 할 때 생후 2${\~}$3주령이 가장 적합한 시기임을 확인하였다. 것이 바람직하다고 판단되었다.의한 발아촉진 효과는 종피의 탈색과 부식으로 인한 광흡수의 증대에서 기인되는 것으로 추측된다.3월 8일과 3월 15일 피복처리구의 그린업이 가장 효과적이었다. 한국잔디 및 한지형 잔디의 비닐 피복으로 인한 초봄 그린업 촉진시 유의할 점은 충분한 수분 유지를 위해 비닐 피복전에 관수를 하거나 비온 후에 비닐 피복하는 것이 좋으며, 비닐 제거시 잔디의 일소현상의 피해를 줄이기 위해 흐린날 비닐을 제거하는 것이 좋을 것으로 판단되었다.유발식이 급여로 $524\%$가 증가된 동맥경화지수는 질경이 에틸아세테이트 분획 병합투여로 대조군에 비하여 $40.2\%,\;51.2\%$가 감소됨으로써 동맥경화 발병 위험율이 대조군에 비하여 감소되었다. HDL-콜레스테롤 함량/총콜레스테롤 함량 비는 고콜레스테롤혈증 유발 식이 급여로 정상군보다 $73.9\%$가 감소됐으나 질경이 에틸아세테이트 분획 병합투여로 대조군에 비하여 유의한 증가를 나타냈다. 26두가 발정 반응($96.3\%$)을 나타내어 2.75${\~}$3.5의 경우가 2.50 이하의 경우에 비하여 높은 발정반응을 나타내었다.osterone과 0.40의 정의 상관이었고 근내지방도와 creatinine 농도간에는 -0.55의 비교적 높은 음의 상관계수가 추정되었으나 유의성은 인정되지 않았다. 6. 한우 비거세우의 도살시 혈청 성분 농도와 도체형질과의 상관에서 육량지수는 연령에 대해 보정한 HDLC 농도와 -0.71의 음의 상관이었으며, 도체율은 globulin과 0.70의 높은 정의 상관이었고,

• 자원환경지질
• /
• 제31권4호
• /
• pp.297-310
• /
• 1998

Geochemical characteristics of environmental toxic elements at the Narim mine area were investigated on the basis of major, minor, rare earth element geochemistry and mineralogy. Ratios of $Al_2O_3/Na_2O$ and $K_2O/Na_2O$ in soils and sediments range from 11.57 to 22.21 and from 1.86 to 3.93, and are partly negative and positive correlation against $SiO_2/Al_2O_3$ (3.41 to 4.78), respectively. These suggested that sediment source of host granitic gneiss could be due to rocks of high grade metamorphism originated by sedimentary rocks. Characteristics of some trace and rare earth elements of V/Ni (0.33 to 1.95), Ni/Co (2.00 to 6.50), Zr/Hf (11.27 to 53.10), La/Ce (0.44 to 0.55), Th/Yb (4.07 to 7.14), La/Th (2.35 to 3.93), $La_N/Yb_N$ (6.58 to 13.67), Co/Th (0.63 to 2.68), La/Sc (3.29 to 5.94) and Sc/Th (0.49 to 1.00) are revealed a narrow range and homogeneous compositions may be explained by simple source lithology. Major elements in all samples are enriched $Al_2O_3$, MgO, $TiO_2$ and LOI, especially $Fe_2O_3$ (mean=7.36 wt.%) in sediments than the composition of host granitic gneiss. The average enrichment indices of major and rare earth elements from the mining drainage are 2.05 and 2.91 of the sediments and are 2.02 and 2.60 of the soils, normalizing by composition of host granitic gneiss, respectively. Average composition (ppm) of minor and/or environmental toxic elements in sediments and soils are Ag=14 and 1, As=199 and 14, Cd=22 and 1, Cu=215 and 42, Pb=1770 and 65, Sb=18 and 3, Zn=3333 and 170, respectively, and extremely high concentrations are found in the subsurface sediments near the ore dump. Environmental toxic elements were strongly enriched in all samples, especially As, Cd, Cu, Pb, Sb and Zn. The level of enrichment was very severe in mining drainage sediments, while it was not so great in the soils. Based on the EPA value, enrichment index of toxic elements is 8.63 of mining drainage sediments and 0.54 of soils on the mining drainage. Mineral composition of soils and sediments near the mining area were partly variable being composed of quartz, mica, feldspar, amphibole, chlorite and clay minerals. From the gravity separated mineralogy, soils and sediments are composed of some pyrite, arsenopyrite, chalcopyrite, sphalerite, galena, goethite and various hydroxide minerals.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.75-75
• /
• 2003

본 연구에서는 대기 중 극 미량으로 존재하는 환경 유해 가스 성분을 검출할 수 있는 미세 소자로의 응용을 위해 마이크로 칸티레버를 제작하고 가스 센서로의 활용 가능성을 검토하였다. 마이크로 칸티레버는 크게 구동층 캐패시터로서 대표적인 압전 재료인 Pb(Zr,Ti)O$_3$ (PZT)를 사용하고 SiNx 박막을 지지층으로 하는 형태로 제작되었다. 제작된 마이크로 칸티레버는 치수 및 형상에 따라 17~29 KHz 의 기본 공진 주파수 값을 나타내었다. Electron beam evaporator를 이용한 copper (Cu) 박막의 단계적인 증착을 통해 칸티 레버 표면에 질량을 증가시키고 그에 따른 마이크로 칸티레버의 공진주파수 변화를 관찰한 결과 질량 증가에 대해 34 Hz/ng의 선형적인 주파수 감소를 나타내었으며, 이로부터 694.4 $\textrm{cm}^2$/g 의 gravimetric sensitivity factor를 얼을 수 있었다. 마이크로칸티레버의 가스 감지능력 시험을 위해 가스 흡착층으로 일차 알콜류의 vapor를 흡착 하는 것으로 보고된 poly methyl metacrytate (PMMA)를 마이크로 칸티레버 표면에 코팅하였다. 마이크로칸티 레버의 기본 공진 주파수 및 PMMA 흡착층 형성과 가스의 흡착에 따른 주파수 변화는 마이크로 칸티 레버로부터 의 전기적 신호를 이용하는 복소 임피던스 분석에 의해 측정되었다. PMMA가 코팅된 마이크로 칸티레버는 ethanol 및 methanol vapor 의 농도가 증가함에 따라 선형적인 공진주파수 감소를 나타내었으며, methanol vapor 의 경우 0.06 Hz/ppm 의 가스 검출 감도를 얻을 수 있었다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.117-126
• /
• 2001

Tribological properties of high temperature fade were investigated by changing relative amounts of ingredients in the brake friction material. Based on a simple experimental formulation containing 10 ingredients, friction materials were tested using a pad-on-disk type friction tester. Twenty-five friction material specimens with different relative amounts of the ingredients were manufactured according to the constrained mixture design .The difference ($\Delta$${\mu}$=${\mu}$$\sub$max/. -${\mu}$$\sub$min/. ) of friction coefficients was measured to represent the high temperature fade. Results from elevated temperature tests showed that five ingredients including cashew, graphite, Sb$_2$S$_3$, ZrSiO$_4$, and Cu fibers played important roles on $\Delta$${\mu}$. In order to find relative importance on fade phenomena among these ingredients, ANOVA(analysis of variance) was performed in this investigation. Thirty-two friction material specimens by changing ${\pm}$50vol.％ of these five ingredients were tested to examine the relative importance. Results showed that cashew, graphite '||'&'||' Sb$_2$S$_3$, and cashew '||'&'||' graphite aggravated the fade behavior and Cu fibers improved on fade resistance.

• 암석학회지
• /
• 제4권1호
• /
• pp.31-48
• /
• 1995

관악산 암주는 지금까지 단순히 흑운모 화강암으로만 구성된 것으로 알려져 왔으나 실제로는 석영+K-장석+사장석+흑운모$\pm$석류석의 광물군으로 보인다. 모드자료와 $An_5$ 미만의 사장석 성분을 고려하면 이 암주는 알칼리 장석화강암으로 명명된다. 서브솔버스 장석, 비교적 초기의 흑운모 정출, Q-Ab-Or 그림에서 유출된 은 관입깊이 등은 관악산 암주를 만든 마그마가 물을 함유하고 있었음을 지시하는데, 이는 아래에 설명하는 무수의 A-형 화강암과 유사한 지화학 성분을 가지는 것과는 대조된다. 관악산 암주의 주성분과 미량성분원소는 서울 화강암질 저반의 것과 뚜렷이 구분되며 이는 두 암체간의 성인적 차이를 시사한다. 관악산 암주의 주성분 및 미량원소 함량은 우리나라의 대부분 중생대 화강암과는 달리 A-형 화강암 특징을 보인다. 즉, $SiO_2$(73~78 wt%), $Na_2O+K_2O$,Ga(27~47 ppm), Nb(22~40 ppm), Y(48~95 ppm) 함량과, Fe/Mg and Ga/Al 비는 높은 반면, CaO(<0.51 wt%), Ba(9~75 ppm)과 Sr(2~23 ppm) 함량은 낮다. 그러나 전형적인 A-형 화강암과 비교했을때, Zr과 LREE는 낮은 함양을 Rb(386~796 ppm)은 높은 함량을 갖는 차이점을 보인다. 이 연구에서는 기존의 연구에서 보고되었던 LREE가 결핍되고 큰 부의 Eu이상을 가지는 회토류 원소 패턴이 근원 마그마의 특성을 가지는 것으로 재해석하였다. 즉 부분용융동안의 잔류물질로 다량의 사장석이 남아야 하는 반면, 휘석, 각섬석, 석류석은 남을 수 없다. 관악산 암주와 A-형 화강암의 지구화학적 유사성은 이 암주의 기원이 A-형 화강암의 기원과 밀접한 관련이 있음을 시사한다.