• 대한전기학회논문지
• /
• 제44권8호
• /
• pp.1068-1074
• /
• 1995

Effect of (Zn$_{1}$3/Nb$_{2}$3/) $O_{2}$ addition on the phase changes and microwave dielectric properties of BaTi $O_{3}$-3Ti $O_{2}$ ceramics were investigated. Addition of (Zn$_{1}$3/Nb$_{2}$3/) $O_{2}$ to BaTi $O_{3}$-3Ti $O_{2}$ resulted in the formation of Ba $Ti_{4}$$O_{9}$, $Ba_{2}$ $Ti_{9}$ $O_{20}$, Ba(Zn$_{1}$3/Nb$_{2}$3/) $O_{3}$, and Ti $O_{2}$ phases. Ba $Ti_{4}$$O_{9}$ phase was gradually transformed to $Ba_{2}$ $Ti_{9}$ $O_{20}$. This was identified by XRD and microstructure. As the Ba $Ti_{4}$$O_{9}$ phase transformed to $Ba_{2}$ $Ti_{9}$ $O_{20}$ phase, the dielectric constant increased to 37.5. Q*f$_{o}$ value was 40000 at x=0.04, and the temperature coefficient of resonant frequency was +10ppm/.deg. C.C.. C.C.

• 한국재료학회지
• /
• 제1권4호
• /
• pp.206-213
• /
• 1991

PbO 77-80wt%, ZnO 4.5-6wt%, $B_2O_3$ 7.5-8.5wt%, $TiO_2$ 3-7wt%, $P_2O_5$ 0.5-2wt%의 조성을 갖는 IC Package봉착용 저융점($400-460^{\circ}C$) 결정화유리 frit를 제조하였다. DTA-TMA, X-선 회절분석, SEM 등을 이용하여 봉착용 유리의 결정화 특성을 연구하였다. $TiO_2$ 함량이 3wt% 함유시료는 $420-440^{\circ}C$에서 $2PbO{\cdot}ZnO{\cdot}B_2O_3$의 결정이 균일성장하였다. $TiO_2$ 함량이 4wt% 첨가된 시료는 $420-440^{\circ}C$에서 $2PbO{\cdot}ZnO{\cdot}B_2O_3와\;PbTiO_3$ 결정이 섞여서 혼합결정을 이루고 있었다. 또한 $TiO_2$ 5wt% 첨가된 시료는 $440-460^{\circ}C$에서 perovskite $PbTiO_3$ 결정만 석출되었다.

• 한국재료학회지
• /
• 제20권1호
• /
• pp.31-36
• /
• 2010

Methylene blue (MB) was degraded by $TiO_2$ and ZnO deposited on an activated carbon fiber (ACF) surface under UV light. The ACF/$TiO_2$ and ACF/ZnO composites were characterized by BET, SEM, XRD, and EDX. The BET surface area was related to the adsorption capacity for composites. The SEM results showed that titanium dioxide and zinc oxide are distributed on the ACF surface. The XRD results showed that the ACF/$TiO_2$ and ACF/ZnO composites contained a unique anatase structure for $TiO_2$ and a typical hexagonal phase for ZnO respectively. These EDX spectra showed the presence of peaks of Ti element on ACF/$TiO_2$ composite and peaks of Zn element on the ACF/ZnO composite. The blank experiments for either illuminating the MB solution or the suspension containing ACF/$TiO_2$ or ACF/ZnO in the dark showed that both illumination and the catalyst were necessary for the mineralization of organic dye. Additionally, the ACF/$TiO_2$ composites proved to be efficient photocatalysts due to degradation of MB at higher reaction rates. The addition of an oxidant $([NH_4]_2S_2O_8)$ led to an increase of the degradation rate of MB for ACF/$TiO_2$ and ACF/ZnO composites.

• 해양환경안전학회지
• /
• 제20권5호
• /
• pp.468-473
• /
• 2014

본 연구에서는 정제되지 않은 ZnO 및 $TiO_2$나노입자를 M4배지에 노출시켜 두 나노입자가 어느 정도 크기의 응집체로 변화되는지를 살펴보고 또한 두 나노입자가 수생태계 생물종인 Daphnia magna에 어떠한 영향을 초래하는지 유영저해 및 폐사율을 통해 살펴보았다. ZnO 및 $TiO_2$나노입자의 분말상태 크기는 각각 20 nm와 40 nm였지만, M4배지에서는 1333 nm와 1628 nm로 약 40~70배의 크기로 응집되었다. 유영저해의 경우 ZnO와 $TiO_2$나노입자 모두 시간 및 농도가 높아질수록 D.magna가 유영하는데 영향을 미친 것으로 나타났으며, 특히 ZnO나노입자가 $TiO_2$나노입자에 비해 더 큰 영향을 미치는 것으로 나타났다. 폐사율의 경우 ZnO나노입자에서는 시간 및 농도가 높아질수록 폐사되는 비율이 높았으며, $TiO_2$나노입자에서는 72시간이 경과된 시점의 10 ppm 이상의 농도에서 폐사하는 것으로 관찰되었다. 이는 나노입자가 해양에 유입됨으로 인해 원래의 크기에 비해 응집되어 증가되어진다는 것을 알 수 있으며, 또한 그 응집체로 인해 수생태계 생물에 영향을 주는 것으로 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.131-134
• /
• 2003

[ $ZnWO_4$ ] shows excellent frequency selectivity due to its high quality factor($Q{\times}f$) at microwave frequencies. However, in order to use $ZnWO_4$ as multilayered wireless communication components, its other properties such as sintering temperature($1050^{\circ}C$), ${\tau}_f$ ($-70ppm/^{\circ}C$) and ${\varepsilon}_r(15.5)$ should be modified. In present study, $TiO_2$ and LiF were used to improve the microwave dielectric and sintering properties of $ZnWO_4$. $TiO_2$ additions to $ZnWO_4$ changed ${\tau}_f$ from negative to positive value, and also increased ${\varepsilon}_r$ due to its high ${\tau}_f$ ($+400ppm/^{\circ}C$) and ${\varepsilon}_r$(100). At 20 mol% $TiO_2$ addition, ${\tau}_f$ was controlled to near zero $ppm/^{\circ}C$ with ${\varepsilon}_r=19.4$ and $Q{\times}f=50000GHz$. However, the sintering temperature was still high to $1100^{\circ}C$. LiF addition to the $ZnWO_4+TiO_2$ mixture was greatly reduced the sintering temperature from $1100^{\circ}C$ to $850^{\circ}C$ due to liquid phase formation. Also LiF addition decreased the ${\tau}_f$ value due to its high negative ${\tau}_f$ value. Therefore, by controlling the $TiO_2$ and LiF amount, temperature stable LTCC material in the $ZnWO_4$-TiO_2-LiF$ system could be fabricated.

• 한국안전학회지
• /
• 제20권4호
• /
• pp.29-33
• /
• 2005

In this paper, reflectance and the dielectric characteristics for $P_2O_5-ZnO-BaO$ system and $SiO_2-ZnO-B_2O_3$ system have been investigated as a function of contents of $TiO_2$. The reflectance was decreased with increasing the contents of $TiO_2$ and the reflectance of $P_2O_5-ZnO-BaO$ system was lowered than that of $SiO_2-ZnO-B_2O_3$ system. The dielectric constant of $P_2O_5-ZnO-BaO$ system was higher than $SiO_2-ZnO-B_2O_3$ system, and the dielectric constant in the both system was increased with increasing of $TiO_2$ contents. This can be explained as the space charge effects. These results are could be applied to the under plate dielectrics of PDP required high reflective ratio and breakdown strength.

• 청정기술
• /
• 제21권1호
• /
• pp.39-44
• /
• 2015

본 연구에서는 다섯 종의 씨앗(춘채, 아욱, 양배추, 배추, 당근)을 이용하여 금속산화물 나노입자(CuO, NiO, Fe₂O₃, Co₃O₄, TiO₂, ZnO)들이 씨앗발아와 발아지수에 미치는 영향을 조사하였다. CuO, ZnO, NiO 나노입자는 씨앗 활성에 뚜렷한 독성 영향을 나타내었으며, 나노입자종류에 따라 상이한 민감도를 나타내었다. 각 나노입자에 대한 독성순서(EC₅₀ 범위)는 다음과 같다: CuO 6~27 mg/L > ZnO 16~86 mg/L > NiO 48~112 mg/L. 나머지 조사 대상 나노입자인 Co₃O₄, TiO₂, Fe₂O₃은 최대 1,000 mg/L 높은 농도 노출에도 뚜렷한 영향을 나타내지 않았다. 씨앗별 상이한 민감도를 나타내었으며, 가장 민감한 종인 아욱의 씨앗발아 EC₅₀은 CuO 5.5 mg/L ZnO 16.4 mg/L, NiO 53.4 mg/L로 조사되었다. 씨앗별 나노입자에 대한 독성 영향은 CuO > ZnO > NiO > Fe₂O₃ ≈ Co₃O₄ ≈ TiO₂ 나타났으나, 당근씨앗은 NiO [EC₅₀ 80.4(71.41~90.54) mg/L]와 ZnO [EC₅₀ 85.8(69.31~106.29) mg/L]가 유사한 독성을 나타내었다.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.897-907
• /
• 1991

This study was conducted to research the formation and the color development of CoO-ZnO-Fe2O3-TiO2-SnO2 system for the purpose of synthesizing the spinel pigments which are stable at high temperature. After preparing CoO-ZnO-Fe2O3, in which CoO causes the color, as a basic composition, $\chi$CoO.(1-$\chi$)ZnO.Fe2O3 system, $\chi$CoO.(1-$\chi$)ZnO.TiO2 system and $\chi$CoO.(1-$\chi$)ZnO.SnO2 system were prepared with $\chi$=0, 0.2, 0.5, 0.7, 1.0 mole ratio respectively. The manufacturing was carried out at 128$0^{\circ}C$ for 90 minutes. These specimens were analyzed by the reflectance measurement and the X-ray diffraction analysis and the results were summarized as follows: 1. All of the specimens formed the spinel structure and were colored with stable yellow or blue. 2. As the content of CoO and Fe2O3 in the specimens being increased, the reflectance of each specimen was measured becoming lower and the colors were changed from yellow to greyish blue and from blue to dark blue. 3. As the substituting amount of Co2+ ion for Zn2+ ion in $\chi$CoO-ZnO-TiO2-SnO2 system being increased, the colors were changed from blue to greyish blue. The colors were changed from yellow to grayish green owing to the tetrahedral Co2+ ions being increased, the octahedral Co2+ ions being decreased with increasing the amount of Sn4+ ions. 4. CoO-ZnO-Fe2O3-TiO2-SnO2 system, in which Zn2+ was substituted with Co2+ and Fe3+ was substituted with Ti4+ and Sn4+, easily formed the spinel structure without regard to the amount of substitution or the ion owing to the selectivity of the coordination number: 4 of Zn2+, 4 of Co2+, 6 of Fe3+ or 6 of Ti4+ and Sn4+.

• 한국재료학회지
• /
• 제8권4호
• /
• pp.312-316
• /
• 1998

ZnO와 $SnO_2$에$ TiO_2$를 첨가시킨 $ZnO-TiO_2$와$SnO_2$-$TiO_2$세라믹 복합체를 제작하여 1000ppm 일산화탄소에 대한 감응특성을 조사하였다. 상분석을 위해서 X-선 회절 분석을 하였고, 전자 주사 현미경을 이용해서 시편 파단면의 미세구조를 관찰했다. 일산화탄소 감도는 건조공기 분위기에서 측정한 저항($R_{dry air}$ )과 1000ppm 일산화탄소 분위기에서의 저항($R_{co}$ )을 측정하여 각각의 저항값의 비로 정의하였다. $TiO_{2}$첨가에 의한 ZnO의 일산화탄소 감도의 변화는 ZT5의 경우 최대 감도가 약 1.7배 감소하였고, $TiO _{2}$첨가에 의한 $SnO_{2}$의 일산화탄소 최대 감도는 약 2.5배 증가함으로써 비교적 $ZnO-TiO_2$배 증가함으로써 비교적 $ZnO-TiO_2$배 증가함으로써 비교적 $ZnO-TiO_2$복합체 보다는 $SnO_2$- $TiO_2$복합체의 일산화탄소 감응특성이 우수했다.

• 한국세라믹학회지
• /
• 제28권4호
• /
• pp.305-314
• /
• 1991

This study was conducted to research the formation and the color development of NiO-ZnO-Fe2O3-TiO2-SnO2 system for the purpose of synthesizing the spinel pigments which are stable at high temperature. After preparing ZnO-Fe2O3 as a basic composition, {{{{ chi }}NiO.(l-{{{{ chi }})ZnO.Fe2O3 system, {{{{ chi }}NiO.(l-{{{{ chi }})ZnO.TiO2 system, and {{{{ chi }}NiO.(l-{{{{ chi }})ZnO.SnO2 system were prepared with {{{{ chi }}=0, 0.2, 0.5, 0.7, 1 mole ratio respectively. The manufacturing was carried out at 128$0^{\circ}C$ for 30 minutes. The reflectance measurement and the X-ray analysis of these specimens were carried out and the results were summarized as follows. 1. In the specimens which included NiO, it was difficult for the spinel structure to be formed. 2. As increasing the contents of NiO and Fe2O3, all the groups which were yellow or green colored changed to brown. 3. NiO-ZnO-Fe2O3 system and NiO-ZnO-TiO2 system formed the spinel structure and the illmenite structure appeared in NiO-TiO2 system.