• Current Photovoltaic Research
• /
• 제3권2호
• /
• pp.54-60
• /
• 2015

ZnSnO thin films were deposited by atomic layer deposition (ALD) process using diethyl zinc ($Zn(C_2H_5)_2$) and tetrakis (dimethylamino) tin ($Sn(C_2H_6N)_4$) as metal precursors and water vapor as a reactant. ALD process has several advantages over other deposition methods such as precise thickness control, good conformality, and good uniformity for large area. The composition of ZnSnO thin films was controlled by varying the ratio of ZnO and $SnO_2$ ALD cycles. The ALD ZnSnO film was an amorphous state. The band gap of ZnSnO thin films increased as the Sn content increased. The CIGS solar cell using ZnSnO buffer layer showed about 18% energy conversion efficiency. With such a high efficiency with the ALD ZnSnO buffer and no light soaking effect, AlD ZnSnO buffer mighty be a good candidate to replace Zn(S,O) buffer in CIGSsolar cells.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.897-907
• /
• 1991

This study was conducted to research the formation and the color development of CoO-ZnO-Fe2O3-TiO2-SnO2 system for the purpose of synthesizing the spinel pigments which are stable at high temperature. After preparing CoO-ZnO-Fe2O3, in which CoO causes the color, as a basic composition, $\chi$CoO.(1-$\chi$)ZnO.Fe2O3 system, $\chi$CoO.(1-$\chi$)ZnO.TiO2 system and $\chi$CoO.(1-$\chi$)ZnO.SnO2 system were prepared with $\chi$=0, 0.2, 0.5, 0.7, 1.0 mole ratio respectively. The manufacturing was carried out at 128$0^{\circ}C$ for 90 minutes. These specimens were analyzed by the reflectance measurement and the X-ray diffraction analysis and the results were summarized as follows: 1. All of the specimens formed the spinel structure and were colored with stable yellow or blue. 2. As the content of CoO and Fe2O3 in the specimens being increased, the reflectance of each specimen was measured becoming lower and the colors were changed from yellow to greyish blue and from blue to dark blue. 3. As the substituting amount of Co2+ ion for Zn2+ ion in $\chi$CoO-ZnO-TiO2-SnO2 system being increased, the colors were changed from blue to greyish blue. The colors were changed from yellow to grayish green owing to the tetrahedral Co2+ ions being increased, the octahedral Co2+ ions being decreased with increasing the amount of Sn4+ ions. 4. CoO-ZnO-Fe2O3-TiO2-SnO2 system, in which Zn2+ was substituted with Co2+ and Fe3+ was substituted with Ti4+ and Sn4+, easily formed the spinel structure without regard to the amount of substitution or the ion owing to the selectivity of the coordination number: 4 of Zn2+, 4 of Co2+, 6 of Fe3+ or 6 of Ti4+ and Sn4+.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1147-1149
• /
• 1993

ZnO/$SnO_2$:F bilayer films have been prepared by pyrosol deposition method to develop optimum transparent electrode for use in amorphous silicon solar cells. The solution for $SnO_2:F$ film was composed of $SnCl_4{\cdot}5H_2O,\;NH_4F,\;CH_3OH$ and HCl, and ZnO films have been deposited on the $SnO_2:F$ films by using the solution of $ZnO(CH_3COO){_2}{\cdot}2H_2O,\;H_2O\;and\;CH_3OH$. These films have been investigated the variation of electrical and optical properties under the hydrogen plasma exposure. The sheet resistance of the $SnO_2:F$ film was sharply increased and its transmittance was decreased with the blackish effect after plasma treatment. However, the ZnO/$SnO_2:F$ bilayer film was shown hydrogen plasma durability because the electrical and optical properties was almost unchanged more then 60 seconds exposure time.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.183-183
• /
• 2010

본 연구에서는 기존의 투명전도박막(ITO) 재료인 Sn 성분을 Zn로 치환하여, Zn의 성분함량 변 화에 따른 투명전도박막의 특성을 조사하기 위하여, Zn이 100% 치환된 $In_2O_{3(90wt%)}-ZnO_(10wt%)$ (IZO) 그리고 Zn이 3 %와 7 % 치환된 $In_2O_{3(90wt%)}-ZnO_{(3wt%)}-SnO_{2(7wt%)}$, $In_2O_{3(90wt%)}-ZnO_{(7wt%)}-SnO_{2(3wt%)}$ (IZTO) 등의 타겟을 제작하여 RF-magnetron sputtering 법으로 투명전도박막을 성장하였다. 각각의 박막에 대해서 전기적 특성조사와 가시광선영역에서의 광투과도 특성, 성막 특성, 그리고 구조적 특성을 조사하였다. Sn이 100% Zn으로 치환된 IZO 박막의 경우 조성 성분비가 90 : 10 wt.%에서 비저항 값이 $5.2{\times}10^{-4}\;{\Omega}cm$ 정도로 전기전도성이 매우 우수한 것으로 나타났으며, 또한 X-ray 회절패턴 분석결과 성분비에 관계없이 비정질구조임을 확인 하였다. Sn이 일부 Zn으로 치환된 IZTO 박막의 경우 성분비가 90(In) : 7(Zn) : 3(Sn) wt%의 경우 비저항 값은 $6.5{\times}10^{-4}\;{\Omega}cm$ 정도로 우수한 것으로 나타났으며, X-ray 회절패턴 분석결과 비정질 구조임을 확인하였다. 광학적 특성으로는 가시광선영역(400~780nm)에서 IZO, IZTO 박막은 85% 이상의 매우 우수한 투과율을 나타내었다.

• 전기학회논문지
• /
• 제67권1호
• /
• pp.68-74
• /
• 2018

All transparent UV photodetector based on ZnO was fabricated with structure of NiO/ZnO/$SnO_2$/ITO by using RF and DC magnetron sputtering system. ZnO was deposited with 4 inch ZnO target (purity 99.99%) for a quality film. In order to build p-n junction up, p-type NiO was formed on n-type ZnO by using reactive sputtering method. The indium tin oxide (ITO) which is transparent conducting oxide (TCO) was applied as a transparent electrode for transporting electrons. To improve the UV photodetector performance, a functional $SnO_2$ layer was selected as an electron transporting and hole blocking layer, which actively controls the carrier movement, between ZnO and ITO. The photodetector (NiO/ZnO/$SnO_2$/ITO) shows transmittance over 50% as similar as the transmittance of a general device (NiO/ZnO/ITO) due to the high transmittance of $SnO_2$ for broad wavelengths. The functional $SnO_2$ layer for band alignment effectively enhances the photo-current to be $15{\mu}A{\cdot}cm^{-2}$ (from $7{\mu}A{\cdot}cm^{-2}$ of without $SnO_2$) with the quick photo-responses of rise time (0.83 ms) and fall time (15.14 ms). We demonstrated the all transparent UV photodetector based on ZnO and suggest the route for effective designs to enhance performance for transparent photoelectric applications.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.313-313
• /
• 2012

ZnO and $SnO_2$, well-known wide direct band-gap semiconductors, have been considered as the most promising functional materials due to their highly sensitive gas sensing and excellent optical properties. ZnO/$SnO_2$ epitaxial hetrostructure exhibited unique luminescence properties in contrast with individual tetra-pod ZnO and $SnO_2$ nanostructures. Polycrystalline $SnO_2$-based samples $Zn_xSn_{1-x}O_2$(x=0, 0.01, 0.03, 0.05) were prepared by solid state reaction and eco-friendly hydrothermal techniques. Scanning electron microscopy equipped with electron dispersive x-ray spectra confirms the formation of near stoichiometric $Zn_xSn_{1-x}O_2$ nanorods of diameter ~10 nm. X-ray diffraction analysis revealed the rutile structure, except for x=0.07, which may have a small part of $Zn_2SnO_4$ as a secondary phase.

• 열처리공학회지
• /
• 제32권2호
• /
• pp.74-78
• /
• 2019

$Zn_2SnO_4$ thin films were deposited on quartzs substrates by using radio-frequency magnetron sputtering system. Thermal treatments at various temperatures were performed to evaluate the effect of annealing temperatures on the properties of $Zn_2SnO_4$ thin films. Surface morphologies were examined by using field emission-scanning electron microscopy and showed that sizes of grains were slightly increased and grain boundaries were clear with increasing annealing temperatures. The deposited $Zn_2SnO_4$ thin films on quartzs substrates were amorphous structures and no distinguishable crystallographic changes were observed with variations of annealing temperatures. The optical transmittance was improved with increasing annealing temperatures and was over 90% in the wavelength region between 350 and 1100 nm at the annealing temperature of $600^{\circ}C$. The optical energy bandgaps, which derived from the absorbance of $Zn_2SnO_4$ thin films, were increased from 3.34 eV to 3.43 eV at the annealing temperatures of $450^{\circ}C$ and $600^{\circ}C$, respectively. As the annealing temperature was increased, the electron concentrations were decreased. The electron mobility was decreased and resistivity was increased with increasing annealing temperatures with exception of $450^{\circ}C$. These results indicate that heat treatments at higher annealing temperatures improve the optical and electrical properties of rf-sputtered $Zn_2SnO_4$ thin films.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.198-198
• /
• 2010

산화물 반도체는 넓은 밴드갭을 가지고 있어 가시광에서 투명하며 높은 이동도로 디스플레이 구동 회로 집적에 유리하다. 또한 가격 및 공정 측면에서도 기존의 Si 기판 소자에 비해 여러 장점을 가지고 있어 차세대 디스플레이의 핵심 기술로 산화물반도체에 대한 관심이 높아지고 있다. 본 연구는 RF 동시 스퍼터링법을 이용하여 Zn-Sn-O 박막을 제조하고, 그 전기적, 광학적, 구조적 특성에 대해 조사하였다. 일정한 증착 온도($100^{\circ}C$)에서 ZnO와 $SnO_2$ 타켓의 인가 파워를 조절하여 Sn/(Zn+Sn) 성분비가 약 40~85%인 Zn-Sn-O 박막을 제조하였다. Sn 함량이 증가할수록 박막의 비저항은 약 $2{\times}10^{-1}$ (Sn 45%)에서 약 $2\;{\times}\;10^{-2}\;{\Omega}{\cdot}cm$ (Sn 67%)까지 감소하다가 다시 증가하는 경향을 보였다. 이 때 캐리어 농도는 $3\;{\times}\;10^{18}$에서 $4\;{\times}\;10^{19}\;cm^{-3}$으로 증가하였으며, 이동도는 11에서 $8\;cm^2/V{\cdot}s$로 약간 감소하였다. XRD분석결과, 제조된 모든 Zn-Sn-O 박막은 비정질 구조를 가짐을 확인하였다. 투과율은 박막 내 Sn함량 증가에 따라 감소하나 모든 시편이 약 70%이상의 투과도를 나타내었다. Zn-Sn-O 박막의 Ga 도핑 영향을 확인하기 위해 ZnO 타켓 대신 갈륨이 5.7 wt.% 도핑된 GZO 타켓을 사용하여 동일한 공정조건에서 박막을 제조하였다. Ga이 첨가된 Zn-Sn-O 박막은 구조적 특성과 광학적 특성에서는 큰 차이를 보이지 않았으나, 전기적 특성의 뚜렷한 변화가 관찰되었다. Sn 함량이 45%인 Zn-Sn-O 박막의 경우, 캐리어 농도가 $3.1\;{\times}\;10^{18}$에서 Ga 도핑 효과로 인해 $1.7\;{\times}\;10^{17}\;cm^{-3}$으로 크게 감소하고 이동도는 11에서 $20\;cm^2/V{\cdot}s$로 증가하였다. 따라서 본 연구는 Zn-Sn-O 비정질 박막에 Ga을 도핑함으로써 산화물 반도체재료로서 요구되는 물성을 만족시킬 수 있다는 가능성을 제시하였다.

• Journal of Electrical Engineering and Technology
• /
• 제7권4호
• /
• pp.596-600
• /
• 2012

ZnO-$SnO_2$ films were deposited by rf magnetron sputtering using a ZnO-$SnO_2$ (2:1 molar ratio) target. The target was made from a mixture of ZnO and $SnO_2$ powders calcined at $800^{\circ}C$. The working pressure was 1 mTorr, and the rf power was 120 W. The ratio of oxygen to argon ($O_2$:Ar) was varied from 0% to 10%, and the substrate temperature was varied from $27^{\circ}C$ to $300^{\circ}C$. The crystallographic properties and the surface morphologies of the films were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force spectroscopy (AFM). The ZnO-$SnO_2$ films deposited in $O_2$:Ar = 10% exhibited resistivity higher than $10^6{\Omega}cm$ and transmittance of more than 80% in the visible range.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 추계총회,초청강연,특별강연,연구발표회
• /
• pp.155.2-155
• /
• 2000