• Journal of the Korean Magnetics Society
• /
• v.5 no.3
• /
• pp.191-196
• /
• 1995

NiCuZn ferrites were prepared by a solid-state reaction and sintered at $900^{\circ}C$ for 5 hours. Its properties were investigated by controlling the ferrite composition and processing. NiCuZn ferrite with a composition of ${(Ni_{0.2}Cu_{0.2}Zn_{0.6}O)}_{1.02}{(Fe_{2}O_{3})}_{0.98}$ was found to have the maximum initial permeability as a result of the variation of Cu content and the (Ni+Cu)/Zn ratio. Curie temperature($T_{c}$) of NiCuZn ferrite was decreased with the larger Cu content and increased with the larger Ni content. NiCuZn ferrites of ${(Ni_{0.2}Cu_{0.2}Zn_{0.6}O)}_{1-w}{(Fe_{2}O_{3})}_{1+w}$ composition milled for 20~80 hours had the maximum initial permeability at w=-0.015 and Curie temperature ($T_{c}$) was decreased with the increasing of $Fe_{2}O_{3}$ deficiency(w).

• Journal of the Korean Ceramic Society
• /
• v.36 no.10
• /
• pp.1108-1114
• /
• 1999

Microstructure and electrical properties of ZnO-doped (0-5 mol%) 0.05 Pb(Mn1/3Sb2/3)O3-0.95 PZT ceramics were investigated. Sintering temperature was decreased to 100$0^{\circ}C$ due to eutetic reaction between PbO and ZnO. Grain-size increased up to adding 1mol% ZnO and then decreased. Compositions of grain and grain-boundary were investigated by WDS. Lattice parameter was decreased with ZnO addition. Density increased with ZnO addition and reached to the maximum of 7.84(g/cm2) at 2 mol% ZnO. The effect of ZnO on electrical properties of PMS-PZT was investigated. At 3mol% ZnO addition electromechanical coupling factor(kp) was about 50% and relative dielectric constant($\varepsilon$33/$\varepsilon$0) was 997 Mechanical quality factor(Qm) decreased with ZnO addition. Lattice parameters and tetragonality(c/a) were measured to investigate relationship between the electric properties and substitution of Zn2+. At 3 mol% ZnO tetragonality was maximiged at c/a=1.0035 Curie temperature (Tc) decreased slightly with ZnO addition.

• Journal of the Korean Ceramic Society
• /
• v.13 no.3
• /
• pp.13-20
• /
• 1976

The magnetic properties, especially the magnetostriction, of ferroxplana $Zn_{1-x}$$M_X$Y(x=0.0, 0.2, 0.4, 0.6) were investigated at room temperature. In general, the Curie temperature and the permeability of ferroxplana $Zn_{1-X}$$Mn_X$Y increased while the amount of the other phase decrease with increased concentration of dopant $Mn^{2+} for $Zn^{2+}. The magnetostriction constnats K1, K2, K3 and K4 for ZnY were ＋0.3, -5.0, -4.3 and $-4.8{\times}$$10^{-6} while that for 4Zn^0.8$ $Mn^0.2$Y were ＋2.5, -5.4, -6.0 and $-3.4{\times}10^{-6}$, respectively.

• Journal of the Korean Ceramic Society
• /
• v.37 no.4
• /
• pp.314-319
• /
• 2000

Microstructueral development and electrical properties in ZnO-Bi2O3-ZnAl2O4 system were investigated with ZnAl2O4 content(0.1~1.0 mol%). The shrinakge of specimens started around $700^{\circ}C$ and finished at 110$0^{\circ}C$, reaching a maximum shrinkage rate at 80$0^{\circ}C$. The shrinkage rate is strongly related to the fromation of a Bi-rich liquid. The increase of the ZnAl2O4 content inhibited the grain growth of ZnO. Most of ZnAl2O4 particles located at the grain boundaries were about 2~3${\mu}{\textrm}{m}$. ZnO grain size changed little up to 110$0^{\circ}C$, but increased markedly above 115$0^{\circ}C$, especially at lower ZnAl2O4 content. Drastic decreasing in breakdown voltage(Vb) with increasing temperature is expected to be dependent on the ZnO grain size and the distribution of the largest grains between the electrode. The nonlinear I-V characteristic was significantly influenced by the ZnAl2O4 content, which exhibited a maximum value at about 15${\mu}{\textrm}{m}$ of ZnO grain size.

• Journal of the Korean Ceramic Society
• /
• v.39 no.12
• /
• pp.1119-1123
• /
• 2002

Nanostructured spinel NiZn ferrites were prepared by the sol-gel method from metal nitrate raw materials. Analyses by X-ray diffraction and scanning electron microscopy showed the average particle size of NiZn ferrite was under 50 nm. The single phase of NiZn ferrites was obtained by firing at 250${\circ}C$, resulting in nanoparticles exhibiting normal ferrimagnetic behavior. The nanostructured $Ni_{1-X}Zn_XFe_2O_4$ (x=0.0∼1.0) were found to have the cubic spinel structure of which the lattice constants ${\alpha}_2$ increases linearly from 8.339 to 8.427 ${\AA}$ with increasing Zn content x, following Vegard's law, approximately. The saturation magnetization $M_s$ was 48 emu/g for x=0.4 and decreased to 8.0 emu/g for higher Zn contents suggesting the typical ferrimagnetism in mixed spinel ferrites. Pure NiZn ferrite phase substituted by Cu was observed before using the additive but hematite phase was partially appeared at $Ni_{0.2}Zn_{0.2}Cu_{0.6}Fe_2O_4$. On the other hand, the hematite phase in this NiZn Cu ferrite was disappeared after using the additive of acethyl aceton with small amount. The saturation magnetization Ms of $Ni_{0.2}Zn_{0.8-y}Cu_yFe_2O_4$(y=0.2∼0.6) as measured was about 51 emu/g at 77K and 19 emu/g at room temperature, respectively.

• Journal of the Korean Ceramic Society
• /
• v.34 no.10
• /
• pp.1074-1082
• /
• 1997

Microstructure and permeability as a function of sintering temperature and composition were studied on the Ni$\delta$Cu0.4-$\delta$Zn0.6Fe2O4 ($\delta$=0, 0.1, 0.2, 0.3, 0.4) which was prepared by Cu2+ substitution for Ni2+ in Ni.0.4Zn0.6Fe2O4, then followed by 8 wt% CuO and 1wt% Bi2O3 as sintering aids. It was found that NiCuZn ferrite in which Cu2+ is substituted for Ni2+ is more effective in reduction of sintering temperature than Ni.0.4Zn0.6Fe2O4, containing CuO as a sintering aid. The specimen $\delta$=0.2 sintered at 90$0^{\circ}C$ for 2hr exhibited the highest initial permeability value ($\mu$o=280 at 1Mhz), but the real permeability decreased at the frequency under 10 MHz. EPMA analysis showed that Ni$\delta$Cu0.4-$\delta$Zn0.6Fe2O4 ($\delta$=0.4), sintered at 95$0^{\circ}C$ for 2hrs consisted of three phase regions of Ni.0.3Cu0.1Zn0.6Fe2O4 region, Cu and Bi liquid existed at the 3-point boundary, although the stabilization energy of Ni2+ is higher than that of Cu2+ in B site.

• Journal of the Korean Chemical Society
• /
• v.39 no.3
• /
• pp.176-185
• /
• 1995

To improve photosensisitizing efficiency of ZnO/$H_2Pc(I)_x$ system, ZnO/$H_2Pc(I)_x$ system was dispersed in a typical photoconductive polymer of poly(9-vinylcarbazole)(PVCZ). The iodine dopant level(x) of ZnO/${\chi}-H_2Pc(I)_x$ is proportional to concentration of iodine, whereas x of ZnO/${\beta}-H_2Pc(I)_x$ decreased from the highest x=0.97 at more than $6.3{\times}10^{-3}$ M iodine solution. The Raman spectra of ZnO/${\chi}-H_2Pc(I)_x$ at 514 nm exhibited characteristic $I_3^-$ patterns in the range of 50∼550 $cm^{-1}$ at $x{\geq}0.57.$ The surface photovoltage of ZnO/${\chi}-H_2Pc(I)_{0.48}$/PVCZ was approximately 1.6 times greater than ZnO/${\chi}-H_2 Pc(I)_{0.48}$ and was 1.8 times of ZnO/${\chi}-H_2Pc(I)_{0.57}$/PVCZ at 670 nm. With ZnO/$H_2Pc(I)_x$/PVCZ, the highest iodine dopant levels showed a higher photovoltage. Therefore the injection of holes from H2Pc into PVCZ resulted in that photosensisitizing effect of ZnO/$H_2Pc(I)_x$/PVCZ system was improved compared to ZnO/$H_2Pc(I)_x$ case.

• Journal of the Korean Ceramic Society
• /
• v.29 no.2
• /
• pp.161-165
• /
• 1992

Nonlinear exponents and electron trap density variations were observered in ZnO-Bi2O3-MnO2 ternary ZnO varistors as a function of heat treatment temperature. Three kinds of ZnO varistor compositions were selected; i.e. 99.0 ZnO-0.5 Bi2O3-0.5 MnO2, 98.5 ZnO-1.0 Bi2O3-0.5 MnO2, and 98.0 ZnO-1.5 Bi2O3-0.5 MnO2 in mol%. Sintering was done at 1150$^{\circ}C$ for three hours, and heat treatments were done at 500$^{\circ}C$, 700$^{\circ}C$, and 900$^{\circ}C$. When heat treated at 500$^{\circ}C$, nonlinear exponents were increased regardless of the Bi2O3 amount. Increasing heat treatment temperature above 500$^{\circ}C$ resulted in lowering nonlinear exponents. Nonlinear exponents seem to be related to the 0.17 and 0.33 eV electron traps which are possibly of intrinsic origin.

• Journal of the Korean Ceramic Society
• /
• v.28 no.3
• /
• pp.225-233
• /
• 1991

In this study, we tried to find out the appropriate synthetic condition and magnetic properties of Ni-Zn ferrite {(NixZn1-x)Fe2O4} powders (where X=0, 0.1, 0.2, 0.3, ……0.9, 1). Ferrite powders were prepared by wet-direct method at 86℃ for 6hrs from FeCl36H2O, NiCl26H2O, and ZnCl2. The powders of (NixZn1-x)Fe2O4 (where X=0.4, 0.5, 0.6) have a good crystallinity, but the other ferrite powders consist of crystal and precursor ferrite. The ferrite powder's lattice constant is increased when ratio of ZnO contant is increased in the ferrite composition. And initial permeability was measured after sintering, result indicated regular pattern except (Ni0.4Zn0.6)Fe2O4 when the frequency were changed 10KHz to 10MHz.

• Journal of Oral Medicine and Pain
• /
• v.25 no.1
• /
• pp.1-7
• /
• 2000

The purpose of this study is to investigate effects of several zinc solutions including Artemisia asiatica-containing zinc solution on concentration of oral volatile sulfur compounds(VSCs). We determined the VSCs concentration of breath of human subjects before and after use of zinc solutions(O.25% $ZnF_2$ Artemisia asiatica-containing 0.25% $ZnCl_2$ and Artemisia asiatica-containing 0.25% $ZnCl_2$ solutions) The results were as follows : 1. 0.25% $ZnCl_2$ solution was more effective than 0.25% $ZnF_2$ solution in reducing the concentration of oral VSCs and the maintenance duration of effectiveness. 2. Artemisia asiatica-containing 0.25% $ZnCl_2$ solution was more effective than Artemisia asiatica-containing 0.25% $ZnF_2$ solution in reducing the concentration of oral VSCs and the maintenance duration of effectiveness. 3. Artemisia asiatica-containing 0.25% $ZnF_2$ solution and 0.25% $ZnF_2$ solution showed no significant difference in reducing the concentration of oral VSCs and the maintenance duration of effectiveness but, Artemisia asiatica-containing 0.25% $ZnF_2$ solution was slightly more effective. 4. Artemisia asiatica-containing 0.25% $ZnCl_2$ solution and 0.25% $ZnCl_2$ solution showed no significant difference in reducing the concentration of oral VSCs and the maintenance duration of effectiveness but, Artemisia asiatica-containing 0.25% $ZnF_2$ solution was slightly more effective.