• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.365-376
• /
• 2007

The purpose of this study was to evaluate the effect of different etching times on microtensile bond strength (${\mu}TBS$) to dentin both initial and after thermocycling with 3 different types of total-etching adhesives. Fifty four teeth were divided into 18 groups by etching times (5, 15, 25 sec), adhesives types (Scotchbond Multipurpose (SM), Single Bond (SB), One-Step (OS)) and number of thermocycling (0, 2,000 cycles). Flat dentin surfaces were prepared on mid-coronal dentin of extracted third molars. After exposed fresh dentin surfaces were polished with 600-grit SiC papers, each specimen was acid-etched with 35% phosphoric acid (5, 15, 25 sec) and bonded with 3 different types of total etching adhesives respectively. Then, hybrid composite Z-250 was built up. Half of them were not thermocycled (control group) and the ethers were subjected to 2,000 thermocycle (experimental group). They were sectioned occluso-gingivally into $1.0\;{\times}\;1.0\;mm^2$ composite-dentin beams and tested with universal testing machine at a crosshead speed of 1.0 mm/min. Within limited data of this study, the results were as follows 1. There was no statistically significant difference in ${\mu}TBS$ between the thermocycled and non-thermocycled groups, except for both SM and SB etched for 25 sec. 2. In thermocycled SM and SB groups, bond strength decreased by extended etching time. In total etching systems, adhesive durability for dentin could be affected by type of solvents in adhesive and etching time. Especially, extended etching time may cause deteriorate effects on bond strength when ethanol-based adhesive was used.

• Restorative Dentistry and Endodontics
• /
• v.29 no.6
• /
• pp.532-540
• /
• 2004

The aim of this study was to measure the cusp deflection during composite restoration for MOD cavity in premolar and to examine the influence of cavity dimension, C-factor and restoration method on the cusp deflection. Thirty extracted maxillary premolar were prepared to four different sizes of MOD cavity and divided into six groups. The width and depth of the cavity were as follows. Group 1; $1.5{\;}{\times}{\;}1{\;}mm$, Group 2; $1.5{\;}{\times}{\;}2{\;}mm$, Group 3; $3{\;}{\times}{\;}1{\;}mm$, and Group 4-6; $3{\;}{\times}{\;}2{\;}mm$ respectively. Group 1-4 were restored using bulk filling method with Z-250 composite. However, Group 5 was restored incrementally, and Group 6 was restored with an indirect resin inlay. The cusp deflection was recorded at the buccal and lingual cusp tips using LVDT probe for 10,000 seconds. The measured cusp deflections were compared between groups, and the relationship between the cube of the length of cavity wall/the cube of the thickness of cavity wall ($L^3/T^3$). C-factor and cusp deflection or % flexure ($100{\;}{\times}$ cuspal deflection / cavity width) was analyzed. The cusp deflection of Group 1-4 were $12.1{\;}\mu\textrm{m},{\;}17.2{\;}\mu\textrm{m},{\;}16.2{\;}\mu\textrm{m}{\;}and{\;}26.4{\;}\mu\textrm{m}$ respectively. The C-factor was related to the % flexure rather than the cusp deflection. There was a strong positive correlationship between the $L^3/T^3$ and the cusp deflection. The cusp deflection of Group 5 and 6 were $17.4{\;}\mu\textrm{m}{\;}and{\;}17.9{\;}\mu\textrm{m}$ respectively, which are much lower value than that of Group 4.

• Restorative Dentistry and Endodontics
• /
• v.25 no.2
• /
• pp.299-308
• /
• 2000

The purpose of this in vitro study was to evaluate the microleakage of 5 curing methods in class V composite restorations which are composed of two-step light curing, pulse-delay cure, low curing-light intensity, moderate curing-light intensity and high curing-light intensity. In this study, class V cavities were prepared on buccal and lingual surfaces of 50 extracted human upper or lower molars on cementum margin. Single Bond adhesive and Z-100 shade A2 were applied for each group following the manufacture's instruction. The experimental teeth were randomly divided into 5 groups of 10 samples (20 surfaces) each. Group 1: two-step light curing; Group 2: pulse-delay cure; Group 3: low curing-light intensity; Group 4: moderate curing-light intensity; Group 5: high curing-light intensity. After 500 thermocycling between $5^{\circ}C$ and $55^{\circ}C$, the 60 teeth were placed in 2% methylene blue dye for 24 hours, then rinsed with tab water. The specimens were embedded in clear resin, then sectioned buccolingually through the center of restoration with a low speed diamond saw. The dye penetration on each of the specimen was then observed with a stereomicroscope at ${\times}20$. The composite resin/tooth interfaces were examined under Scanning Electron Microscopy. The results were statistically analyzed using the Kruskal-Wallis One Way ANOVA and Dunn's Method. The results of this study were as follows. 1. In all groups, the leakage values seen at the enamel margin were significantly lower than those seen at the dentin margin(P<0.05). 2. No group in this study showed significant differences in leakage values at both the enamel and the dentin margins(P<0.05). 3. In all groups, the gaps seen at the enamel margin were significantly lower than those seen at the dentin margin(P<0.05). 4. The gaps in this study showed significant differences and two-step light-curing and low curing-light intensity produced significant less gap than high curing-light intensity(P<0.05).

• Journal of Food Hygiene and Safety
• /
• v.34 no.5
• /
• pp.431-437
• /
• 2019

This study was conducted to develop a simultaneous analysis method for ferulic acid, caffeic acid, catechin and taxifolin from Health Functional Food (HFF) Pinus Pinaster bark extract. The simultaneous analytical method for ferulic acid, caffeic acid, catechin and taxifolin is carried out using UPLC-MS/MS. The method validation was performed to determine selectivity, linearity, accuracy, limit of detection (LOD), limit of quantification (LOQ) and precision for ferulic acid, caffeic acid, catechin and taxifolin. LC-MS/MS method was established using an Acquity UPLC BEH $C_{18}$ Column and was applied for these 4 compounds. Product-ion traces, at m/z $194.2{\rightarrow}133$, $180.2{\rightarrow}135$, $290.3{\rightarrow}245$, $304.3{\rightarrow}248$, were used for quantitative analysis of ferulic acid, caffeic acid, catechin and taxifolin, respectively. Excellent linearity ($r^2=0.999$) was observed for ferulic acid, caffeic acid, catechin and taxifolin in the concentration range (50-2500 mg/L). The observed recoveries of these 4 compounds were found to be between 84.9 and 104.9%, while precision was between 1.20 and 4.43% relative standard deviation (% RSD).

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.72-72
• /
• 2003

The present study examined the possibility of cryopreservation of the D-shaped and umbo larvae of arkshell (Scapharca broughtonii), in terms of the survival rates after freezing and thawing. D-shaped and umbo larvae of arkshells were obtained from a shellfish farming on Yosu city. The average shell lengths were $93.3 \pm 10.1 \mu$m and $201.7 \pm 13.5 \mu$, respectively. Five cryoprotectants (CPAs), dimethyl sulfoxide (DMSO), glycerol, ethylene glycol (EG), propylene glycol (PG), and methanol, were tested at the concentrations of 1.5, 2.0 and 2.5 M. After larvae suspended in CPAs, cryoprotectants were loaded in 0.5 ml straws at a larval density of 50-100 larvae per straw, and epuilibrated for 10 and 20 minute at room temperature ($23^{\circ}C$), repectively. Straws were cooled at a rate of $1^{\circ}C$/min from $0^{\circ}C$ to $-12^{\circ}C$, held for 5 min at $-12^{\circ}C$, and then cooled at $2^{\circ}C$/min to $-35^{\circ}C$ and equilibrated for 5 min followed by plunging in liquid nitrogen. After storage in liquid nitrogen for 1 day, straws were thawed in a $30^{\circ}C$ water. As soon as straws were observed to melt, larvae were diluted with an equal volume of ASW and then washed twice with a large volume of ASW at an interval of 2 min to unload the CPAs. The results showed that after equilibration for 10 and 20 minute at room temperature, no larvae survived using methanol as CPAs, and it was observed that larval shells all open slightly, and larval flesh broke down and slopped over the shells. The highest survival rates (D-shaped larvae: 77.6%, umbo larvae: 59.3%) were obtained with 2M DMSO, and 1.5M glycerol yielded survival rates of 53.8% for D-shaped larvae and 37.5% for umbo larvae. The surviving D-shaped larvae showed active rotary motion and perfect membrane integrity and cytoplasmic normality, and the vigorous movement of veliger cilia was observed inside the closed shells. The breakdown of tissue occurred in the abnormal larvae, and the isolated cell often run out of shells.

• Korean Journal of Environmental Biology
• /
• v.40 no.4
• /
• pp.556-566
• /
• 2022

The temperature-dependent development of Poinsettia thrips, Echinothrips americanus was studied at eight constant temperatures (15.0, 17.5, 20.0, 22.5, 25.0, 27.5, 30.0, and 32.5±1℃), 65±5% RH and photoperiod of 16L:8D conditions. The developmental stages were divided into egg, 1st instar, 2nd instar, pre-pupa, pupa, and adult. The total developmental time in the immature stage was 40.4 days at 15.0℃ and 11.6 days at 30.0℃, and it decreased with increasing temperature. The lowest temperature of the whole immature period was 10.7℃, and the cumulative temperature to complete the entire immature period was 217.4 degree days. The optimal development temperature (T_opt) for the whole immature stage was estimated to be in the range of 30.51-31.21℃. T_opt for each immature stage was 31.64-35.47℃ at egg, 30.02-33.08℃ at 1st instar, 29.16-34.43℃ at 2nd instar, 27.63-29.21℃ at pre-pupa, and 29.81-30.12℃ at pupa. In the analysis of the six non-linear models, Logan 6 model was the most appropriate as Zi(Weighting Factors) was 0.18.

• Journal of Korean Society of Forest Science
• /
• v.31 no.1
• /
• pp.8-20
• /
• 1976

For study on the variation of natural stand, three populations of Pinus densiflora S. et Z. were selected at samsanri Yongogmyun Myongjugun Kangwondo (4), Hawonri seomyun Uljingun Kyongbuk (5), and Emogdong Suweon Kyongkido (6) successibely after the selection of three population in 1974. Twenty individual trees were chosen from each population and the morphological characteristics of trees, needle and wood properties were investigated on the trees. The results are summerized as follows; 1. Serration density, resin canal number in needle did not show significant differences, however stomata row number in the both sides of needle showed highly significant differences among 3 populations. But significant differences were calculated among individual trees in a population regarding any character of needles. 2. Ail population had high correlation on the stomata row between abaxial and adaxial side of needle. 3. The Myongjungun population showed the highest value of resin duct index, which means the population had the highest degree of hybrid character. 4. The ring segment width and summerwood percentage in the wood properties had significant differences, and yet specific gravity and tracheid length had not significant differences statistically among 3 populations. But all the values were significant statistically among the ring segments within population. 5. The ring segment width decreased rapidly with increasing tree age but summerwood percentage, specific gravity, tracheid length increased slowly to the middle age of tree and then decreased slowly after the age. But the patterns of decrease or increase were some different by population. 6. The values of Uljingun population were generally high in the coefficient of variation on all the needle characters. And the values of Suweon population were always the highest and those of Myongjugun population the lowest in the coefficient of variation on all the wood properties.