• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.11
• /
• pp.1050-1056
• /
• 2015

In this paper, we use the characteristics of electromagnetic waves underwater attenuation for estimating linear distance between a transmitting node and receiving node, and research underwater vertical plane attenuation model for constructing the underwater localization system. The underwater localization of 2 dimensional with the plane attenuation model in the horizontal plane (H-plane) was proposed previous research. But for the 3 dimensional underwater localization, the additional vertical plane (E-plane) model should be considered. Because the horizontal plane of omnidirectional antenna has the same attenuation tendency in x-y plane according to the distance, whereas in vertical plane shows an irregular pattern in x-z plane. For that reason, in the vertical plane environment, the attenuation should be changed by the position and inclination. Hence, in this paper the distance and angle between transmitting and receiving node are defined using spherical coordinate system and derive an antenna gain pattern using half power beam width (HPBW). The HPBW is called a term which defines antenna's performance between isotropic and other antennas. This paper derives omnidirectional antenna's maximum gain and attenuation pattern model and define vertical plane's gain pattern model using HPBW. Finally, experimental verifications for the proposed underwater vertical plane's attenuation model was executed.

• Journal of Sericultural and Entomological Science
• /
• v.46 no.1
• /
• pp.38-43
• /
• 2004

The strings of Gayageum and Geomungo are usually made of raw silk. It needs good vibration as well as good durability to endure during play the Gayagum and Geomungo. This study was carried out to discuss some effects of twisting number of first and final twisting on the mechanical properties of silk Gayageum strings. Tenacity of strings were largely decreased proportionally with the increase of number of twisting of strings but elongation of strings were in the opposition direction. However, it was needed to hard twisting string for the good vibration. The proper S direction twisting velocity of moving twister during final twisting (Z direction) until three thread become one thread, was 40% of basic twister.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.6 s.40
• /
• pp.13-22
• /
• 2004

Ductiluty factor has played an important role in seismic design as it is key component of response modification factor(R). In this stuty, ductility factors() are calculated by multiplying ductility factor for SDOF systems() and MDOF modification factors(). Ductility factors() for SDOF systems are computed from nonlinear dynamic analysis undergoing different level of displacement ductiluty demands and period when subjected to a large number of recorded earthquake ground motions. The MDOF modification factors() are proposed to account for the MDOF systems, based on previous studies. A total of 108 prototype steel frames are designed to investigate the ductility factors considering the number of stories(4, 8 and 16-stories), framing system(Perimeter Frames, PF and Distributed Frames, DF), failure mechanism(Strong-Column Weak-Beam, SCWB and Weak-Column Strong-Beam, WCSB), soil profiles(SA, SC and SE in UBC 1997) and seismic zone factors(Z=0.075, 0.2 and 0.4 in UBC 1997). It is shown that the number of stories, failure mechanisms (SCWB, WCSB), and soil profiles have great influence on the ductility factors, however, the structural system(Perimeter frames, Distributed frames), and seismic zones have no influence on the ductility factors.

• Korean Journal of Cleft Lip And Palate
• /
• v.11 no.2
• /
• pp.71-75
• /
• 2008

The outcome of primary surgery for cleft lip is judged by its effects on the quality of oro-facial function and development. Many surgical techniques have been tried to obtain better results, however, Delaire introduced a technique of functional closure of the lip and nose, based on the findings of no true hypoplasia in the tissues either side of the cleft. In a seven-month-old Asian male patient with unilateral incomplete cleft lip, we carried out the primary closure by modified Delaire's technique. With no alveolar bone graft, the vertical incision on the nasal base was omitted in this patient because of his acceptable symmetry of nose. Also, a small Z plasty was added on the non-cleft side. The V-shaped incisions, whose notch was located on each side of the red vermilion, were designed and beveled incisions were performed for the rehabilitation of lip length and thickness, considering the postoperative wound contracture. We assured that this modification of Delaire's technique could be applied for various cases of primary closure of incomplete cleft lip.

• Korean Journal of Plant Resources
• /
• v.25 no.1
• /
• pp.63-71
• /
• 2012

To assess parameters of mating system in seed orchard, such as outcrossing rates, number of potential pollen contributors, and degree of pollen contamination, seeds, produced in '77 plot of the Japanese red pine (Pinus densiflora S et Z) seed orchard at Anmyeon island, were collected in 2007 and analysed by nSSR and cpSSR markers. Estimates of outcrossing rates ranged from 91.2 to 100% (mean 97.7%) on the basis of the analysis of cpSSR haplotypes and from 81.6 to 100% (mean 95.3%) on the basis of the analysis of nSSR genotypes. By cross checking of both DNA markers, seeds, presumed to be products of self pollination on the basis of single marker, were confirmed as outcrossed seeds, which resulted in cumulative outcrossing rates of 98.9%. On the basis of pooled cpSSR haplotype of each seed, the number of pollen contributors and paternal contribution rates were estimated as 14.8 and 0.512, respectively. In conclusion, considering pretty high level of outcrossing rates observed in a seed orchard, good genetic potential of the seeds, produced in '77 plot of the seed orchard of Japanese red pines at Anmyeon island, may be guaranteed. Investigated results from the analysis of mating system of Japanese red pines in a '77 plot of the seed orchard may also be expected to provide useful information for the management and establishment of the seed orchard of the progressive generation.

• Journal of Marine Bioscience and Biotechnology
• /
• v.8 no.1
• /
• pp.39-44
• /
• 2016

The microalgae have been studied for a source of biodiesel production. It is important to select the microalgae, which grows rapidly in local environmental conditions such as temperature range and ingredient of local seawater. The aim of this study was isolating microalga, which has rapid growth rate and high FAME contents in wide temperature ranges, for microalgal offshore cultivation in Korea, one of the country with four distinct seasons. Firstly, we had isolated a green microalga, Tetraselmis sp. KCTC12236BP, which has faster growth rate in low temperature (5 and $10^{\circ}C$) than Tetraselmis suecica and Dunaliella tertiolecta LB999 from Young Heung Island, Incheon, Korea. This microalga was cultivated in outdoor circulated tank photobioreactor (CT-PBR). As a result, this microalga could grow in wide temperature ranges (6 to $29^{\circ}C$), outdoors. After that, the biomass was recovered, and 13.2 g biodiesel could be acquired from 110 g dry biomass. These results indicate that the isolated microalga, Tetraselmis sp. KCTC12236BP is proper to biodiesel production using outdoor cultivation in Korea for all seasons.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.2
• /
• pp.54-58
• /
• 2007

This paper describes an atomic force microscope (AFM)-based instrument for measuring the nanoscale cutting edge profiles of diamond cutting tools. The instrument consists of a combined AFM unit and an optical sensor to align the AFM tip with the top of the diamond cutting tool edge over a submicron range. In the optical sensor, a aser beam is emitted from a laser diode along the Y-axis and focused to a small beam spot with a diameter of approximately $10{\mu}m$ at the beam waist, which is then received by a photodiode. The top of the tool edge is first brought into the center of the beam waist by adjusting it in the X-Z-plane while monitoring the variation in the photodiode output. The cutting tool is then withdrawn and its top edge position at the beam center is recorded. The AFM tip can also be positioned at the beam center in a similar manner to align it with the top of the cutting edge. To reduce electronic noise interference on the photodiode output and thereby enhance the alignment accuracy, a technique is applied that can modulate the photodiode output to an AC signal by driving the laser diode with a sinusoidal current. Alignment experiments and edge profile measurements of a diamond cutting tool were carried out to verify the performance of the proposed system.

• Journal of Microbiology
• /
• v.40 no.2
• /
• pp.156-160
• /
• 2002

The whole gal/lae operon genes of Lactococcus lactis ssp. lactis 7962 were reported as follows: galA-galM-galK-galT-lacA -lacZ-galE. The galK gene encoding a galactokinase involved in one of the Leloir pathways for galactose metabolism was found to be 1,197 bp in length and encodes a protein of 43,822 Da calculated molecular mass. The deduced amino acid sequence showed over 50% homology with GaIK proteins from several other lactic acid bacteria. The galK gene was expressed in E. coli and the product was identified as a 43 kDa protein which corresponds to the estimated size from the DNA sequence. The galactokinase activity of recombinant 5. coli was about 8 times greater against that of the host strain and more than 3 times higher than the induced L. lactis 7962.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.3
• /
• pp.722-731
• /
• 1999

The purpose of this study is to analyze the factors associated with health and diet by nutritional status. The subjects were the children aged 2 to 6. Physicians and nurses measured children's anthropometries and examined their blood and urine. Interviewers questioned children's food habits to their mothers. 24 hour recall was done for children with their mother. The nutritional status was classified to 'underweight', 'normal weight' and 'overweight' by weight for height(median±1 S.D.) of the reference population. The number of subjects in each group(under, normal, over) was 25, 130 and 49. Factors including anthropometry and hemoglobin concentration were not significantly dif ferent by the nutritional status. The birth weight of children was correlated positively to mothers' BMI. Z scores of weight for height were related to the birth weight positively by the analysis of variance. The children of the underweight group used nutritional supplements more frequently than those of normal and overweight group. The nutrient intakes of normal weight group were higher than those of low and overweight group. Particularly, the intakes of energy, carbohydrate and calcium were significantly high among the groups. In terms of number of foods, food groups and dishes consumed per day, the children of the normal weight group ate more diversely than other groups but the differences were not significant. In conclusion, the children of normal weight group had similar characteristics with other groups but had more desirable dietary intakes than other groups in this study. Because the diet of children may be different by the nutritional status, nutrition education for children should be conducted according to the characteristics of each group's diet.

• The Korean Journal of Physiology and Pharmacology
• /
• v.24 no.6
• /
• pp.529-543
• /
• 2020

In contrast to ventricular myocytes, the structural and functional importance of atrial transverse tubules (T-tubules) is not fully understood. Therefore, we investigated the ultrastructure of T-tubules of living rat atrial myocytes in comparison with ventricular myocytes. Nanoscale cell surface imaging by scanning ion conductance microscopy (SICM) was accompanied by confocal imaging of intracellular T-tubule network, and the effect of removal of T-tubules on atrial excitation-contraction coupling (EC-coupling) was observed. By SICM imaging, we classified atrial cell surface into 4 subtypes. About 38% of atrial myocytes had smooth cell surface with no clear T-tubule openings and intracellular T-tubules (smooth-type). In 33% of cells, we found a novel membrane nanostructure running in the direction of cell length and named it 'longitudinal fissures' (LFs-type). Interestingly, T-tubule openings were often found inside the LFs. About 17% of atrial cells resembled ventricular myocytes, but they had smaller T-tubule openings and a lower Z-groove ratio than the ventricle (ventricular-type). The remaining 12% of cells showed a mixed structure of each subtype (mixed-type). The LFs-, ventricular-, and mixed-type had an appreciable amount of reticular form of intracellular T-tubules. Formamide-induced detubulation effectively removed atrial T-tubules, which was confirmed by both confocal images and decreased cell capacitance. However, the LFs remained intact after detubulation. Detubulation reduced action potential duration and L-type Ca²⁺ channel (LTCC) density, and prolonged relaxation time of the myocytes. Taken together, we observed heterogeneity of rat atrial T-tubules and membranous ultrastructure, and the alteration of atrial EC-coupling by disruption of T-tubules.