• 한국세라믹학회지
• /
• 제36권7호
• /
• pp.767-772
• /
• 1999

The effect of B2O3 addition on the sintering behavior dielectric and ferroelectric properties of Ba0.7Sr0.3TiO3 ceramics were investigated. The sample with 0.5wt% B2O3 was sintered under 115$0^{\circ}C$. The dielectric and ferroelectric properties of BST with 0.5wt% B2O3 was as good as BST without B2O3 sintered at 135$0^{\circ}C$ and its dielectric loss was even better When B2O3 was added over 1.0wt% the overdoped B2O3 remained in the specimens and formed a second phase which degraded the sintering behaivor dielectric properties of BST.

• Bulletin of the Korean Chemical Society
• /
• 제23권5호
• /
• pp.745-748
• /
• 2002

A novel titania sol for the preparation of hydrophilic TiO2 films was synthesized from TiCl4. TiO2 films were prepared by spraying the sol on glass substrates and the hydrophilic properties of the films were invest igated with illumination of UV light. The contact angle of a water drop on the films decreased to less than 7˚, which indicates the excellent hydrophilicity of the TiO2 films.

• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.667-670
• /
• 2009

The understanding of behaviors of hydroperoxyl/superoxide anion radicals (${H_2O_2}^./{O_2}^{-.}$) generated from a photoirradiated $TiO_2$ surface is essential to improve the efficiency of $TiO_2$ photocatalytic reactions by decreasing the recombination of photoinduced electron-hole ($e^--h^+$) pairs. In contrast with previous studies, we found that ${H_2O_2}^./{O_2}^{-.}$ generated on the surface of illuminated $TiO_2$ particles are mobile. ${H_2O_2}^./{O_2}^{-.}$ formed by the photocatalysis of $TiO_2$ particles immobilized onto the inner surface of a coil-quartz tube were forced under a continuous flow through a knotted tubing reactor (KTR) and into the aqueous phase completely separated from the $TiO_2$ particles, and were measured by a chemiluminescence (CL) technique using 2-methyl-6-(p-methoxyphenyl)-3,7-dihydroimidazo[ 1,2-a]pyrazin-3-one (MCLA) as the reagent. The initial concentration of the ${H_2O_2}^./{O_2}^{-.}$ stream entering the KTR was determined by its half-life (98 s) at pH 5.8. We suggests that the efficiency of $TiO_2$ photocatalytic reactions may be further improved by utilizing the mobility of ${H_2O_2}^./{O_2}^{-.}$.

• 생명과학회지
• /
• 제9권5호
• /
• pp.581-589
• /
• 1999

This study was carried out to compare ozonation with photocatalysis degradation for removal Geosmin of algae byproduct. The change of pH was decresed from 7.02 to 2.8 after contact time 480 minute for ozonation. In case of UV-germicidal lamp, pH was very quickly increased from 7.02 to 7.5, but Halogen lamp did very slowly change pH. Geosmin degradation ratio was as following, UV-germicidal lamp/TiO2(100mg/L) O3>UV-germicidal lamp/TiO2(50mg/L)>UV-germicidal lamp(10W)>halogen lamp(50W). Instead of TiO2 suspension solution, Geosmin degradation ratio was very low using hollow bead and pellet as coated TiO2. As a result of identifing byproducts, ozonation generated three species of aldehyde such as 3-Heptanone and three species of alcohol such as Heptanal, but photocatalysis formed 1, 14-Tetradecanediol infinitesimally.

• Korean Chemical Engineering Research
• /
• 제49권2호
• /
• pp.175-180
• /
• 2011

본 연구에서는, 전자의 재결합을 감소시켜 염료 감응형 태양전지의 효율을 향상시키고자 다른 에너지 준위를 갖는 $TiO_{2}$와 $V_{2}O_{5}$을 혼합하여 $TiO_{2}/V_{2}O_{5}$ 혼성반도체를 제조하였다. 또한 제조된 $TiO_{2}/V_{2}O_{5}$ 혼성반도체는 페인트 쉐이커를 이용하여 회쇄 후 염료 감응형 태양전지의 제조 및 전기화학적 특성 평가를 함으로써 $V_{2}O_{5}$ 혼합 및 회쇄 효과가 전지효율에 미치는 영향을 고찰하였다. I-V 곡선을 통하여 측정된 염료 감응형 태양전지의 효율은 $V_{2}O_{5}$ 혼합 및 회쇄 효과에 의하여 2.9에서 5.7%로, $TiO_{2}$ 염료 감응형 태양전지에 비하여 약 2배 증가하였다. 이러한 결과는 $TiO_{2}$의 전도대보다 낮은 전도대를 갖는 $V_{2}O_{5}$의 도입으로 효과적으로 전자를 FTO 유리에 전달하여, 전자가 염료 및 전해질과의 재결합을 감소하게 되어 에너지 전환효율이 증가된 것으로 여겨 진다. 또한, 임피던스 결과도 회쇄된 $TiO_{2}/V_{2}O_{5}$ 혼성 반도체의 효과를 나타내는 $TiO_{2}$/염료/전해질 계면의 저항감소를 보여 주었다.

• 한국안광학회지
• /
• 제8권2호
• /
• pp.111-117
• /
• 2003

국내외 썬글라스 반미러 코팅렌즈의 광학적 특성을 파악하기 위해, 분광광도계를 이용하여 반미러 코팅렌즈의 반사율을 측정하였으며, Macleod 프로그램을 이용해 계산한 결과와 비교 분석하였다. 또한 황금 색깔이 나는 TiN을 이용한 반미러 코팅렌즈를 설계하였고, 광학특성을 조사하였다. 반미러 코팅렌즈의 분석결과, 은색 투톤(two tone) 반미러 코팅은 금속 크롬(Cr)을 사용하였으며 경도를 증가시키기 위하여 크롬위에 $SiO_2$(또는 $Al_2O_3$)를 증착하여 사용하였다. 크롬 위에 증착되는 $SiO_2$의 두께는 10nm 정도가 적정한 것으로 판단된다. 칼라 반미러 코팅의 경우 디자인 결과는 각각 다음과 같다 ; blue 계열은 [air|$SiO_2$(66.3)|$TiO_2$(129.0)|$SiO_2$(62.9)|$SiO_2$(26.0)|$TiO_2$(120.3)|$SiO_2$(9.1)|glass]이며, gold 계열은 [air|$SiO_2$(60.6)|$TiO_2$(86.2)|$SiO_2$(13.5)|$TiO_2$(86.8)|$SiO_2$(214.38)|glass]이며, green 계열은 [air|$SiO_2$(74.3)|$TiO_2$(75.8)|$SiO_2$(44.3)|$TiO_2$(11.6)|$SiO_2$(160.8)|$TiO_2$(12.9)|$SiO_2$(183.3)|$TiO_2$(143.8)|glass]이며, silver 계열은 [air|$SiO_2$(21.2)|$TiO_2$(49.7)|$SiO_2$(149.3)|glass]이다. white 반미러 코팅인 경우는 [air|$SiO_2$(17nm)|$TiO_2$(43nm)(또는 $ZrO_2$)|$SiO_2$(87nm) polysiloxane($4.46{\mu}m$)|glass or CR-39]이며, 가시광선 영역(400~700 nm)에서 평균 19%의 반사율을 가지며 흡수가 적기 때문에 약 80%의 투과율을 보이는 white 타입의 반미러가 되게 된다. 황금빛 색깔을 띠는 반미러 코팅렌즈의 설계에 있어서 [air|$SiO_2$(170nm)|TiN(15nm)|glass]가 되면 CIE 좌표값은 거의 [air|Au(150nm)|glass]의 좌표값과 유사해지는 것을 볼 수 있었다.

• 한국세라믹학회지
• /
• 제28권10호
• /
• pp.803-809
• /
• 1991

Microstructure, room temperature resistivity and temperature coefficient of resistance of BaTiO3 ceramics were characterized and measured in this study. The basic composition of the BaTiO3 cremics was formed by adding 0.25 mol% Dy2O3 and 0.07 mol% MnO2 to the BaTiO3 composition. Samples of the BaTiO3 ceramics were prepared by adding various amounts of the TiO2, SiO2 and Al2O3 to the basic composition. An addition of 1 mol% TiO2, 2 mol% SiO2 and 0.5 mol% Al2O3 to the basic composition resulted both the values of the room temperature resistivity and the temperatured coefficient being maxium. Meanwhile, an addition of 1 mol% TiO2 and 1 mol% Al2O3 to the basic composition resulted the value of the room temperature resistivity maxium and the temperature coefficient minimum. The temperature coefficient showed a maximum value as well as a minimum value when the three kinds of the additives were added together to the basic composition of the BaTiO3 ceramics. Maxed phases of BaTi3O7, BaTiSiO5 and BaAl2Si2O8 were present at the grain boundary.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.147-148
• /
• 2007

Dye-sensitized solar cell using conversion of solar energy to electrical energy appeared that which solves a environmental matter. The dye-sensitized solar cell uses nano-crystalline oxide semiconductor for absorbing dye. The $TiO_2$ is used most plentifully. The efficiency of the dye-sensitized solar cell changes consequently in the particle size, morphology, crystallization and surface state of the $TiO_2$. In this paper, we report The effect of titania$(TiO_2)$ thickness on the performance of dye-sensitized solar cells. Using doctor blade method, It produced the thickness of the $TiO_2$ with $7\;{\mu}m,\;10\;{\mu}m,\;13\;{\mu}m$. The efficiency was the best from $10{\mu}m$. It had relatively low efficiency on the thickness from $7\;{\mu}m\;to\;13\;{\mu}m$. The reason why it presents low efficiency on $7\;{\mu}m$ thickness is that excited electrons can not be delivered enough due to thin thickness of $7\;{\mu}m\;TiO_2$. And The reason why it presents low efficiency on $13\;{\mu}m$ thickness is that thick $13\;{\mu}m\;TiO_2$ can not penetrate the sunlight enough.

• 한국세라믹학회지
• /
• 제28권4호
• /
• pp.338-346
• /
• 1991

The alumina-titania composite powders coated with Al2O3 were prepared by the method of hydrolysis-deposition of mixed aluminium salt solution of Al2(SO)4-Al(NO3)3-Urea. The effects of coating-process parameters on the characteristics of coated composite powders were also investigated. As the content of TiO2 dispersed in deionized water increased, the coated composite powders were found to be more uniform in size and unagglomerated. When TiO2 powders were coated for 30 min, the optimum TiO2 content in the coating process was 400 mg/ι. The size of TiO2 particle was increased approximately from 0.7${\mu}{\textrm}{m}$ to 1.0${\mu}{\textrm}{m}$ through coating of Al2O3. The IEP of coated composite powders was pH=8.3 identical to the value of aluminium hydroxides and the zeta-potential showed nearly similar values each other. When heat treating coated composite powders at 130$0^{\circ}C$, only two phases of TiO2(rutile) and Al2TiO5 were observed. These results showed that the suface of TiO2 could be uniformly coated with the aluminium hydroxide.

• 한국세라믹학회지
• /
• 제23권5호
• /
• pp.9-16
• /
• 1986

The effect of $TiO_2$ addition to the 90wt% Cordierite-10wt% Enstatite base glass was investi-gated to understand the crystallization behavior of the glass. Glasses with addition of $TiO_2$ less than 7, 5wt% had a tendency of surface crystallization and were cracked when heat treated and in this case the crystalline phase formed was indialite. glasses with addition of $TiO_2$ more than 10wt% to 15wt% were crystallized in bulk when heat treated and were suitable for glass-ceramics. The highest microhardness 1640kg/$mm^2$ was obtained when the glass of 12.5wt% $TiO_2$ addition was heat treated at 762$^{\circ}C$ for 60 minutes for nucleation and at 1135$^{\circ}C$ for 20 minutes for crystal growth and in general higher microhardness was obtained when crystalline phase of magnesium aluminum titanate and $\mu$-cordierite were developed. Avrami equation for crystal growth kinetics was applicable in glasses of less than 7.5 wt% $TiO_2$ addition and in case of glasses of more than 10wt% $TiO_2$ addition it was not applicable because of too fast crystal growth.