• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.53.2-53.2
• /
• 2020

We measure X-ray timing and spectral properties of the pulsar PSR J0205+6449. Pulsar's rotation frequency ν = 15.20102357(9) s-1 and its derivative ${\dot{\nu}}=-4.5(1){\times}10^{-11}s^{-2}$ are measured, and the pulsed spectrum of 2-30 keV is model of power law with photon index ��psr = 1.07(16) and F2-30 keV = 7.3(6) × 10-13 erg cm-2 s-1. We use thermal emission models and non-thermal model to fit the pulsar spectrum and measure the surface temperature and luminosity of the pulsar. The surface temperature T∞ = 0.5-0.8 MK and luminosity Lth = 1-5 × 1032 erg s-1 are measure, and this result verifies the previous results known to have low surface temperature and luminosity for the age range of

• Journal of Industrial Technology
• /
• v.8
• /
• pp.13-21
• /
• 1988

For the improvement of productivity of Pleurotus ostreatus, the production of liquid spawn was studied. The highest liquid spawn production was obtained after shaking culture for 4 days in the culture medium containing 5%(W/V) wheat flour, 0.2%(W/V) yeast extract, 0.1%(W/V)$KNO_3$ 0.05% (W/V) $MgSO_4{\cdot}7H_2O$, 0.05%(W/V) $KH_2PO_4$. The optimum pH and temperature was 7.0 ana $30^{\circ}C$. The period required to complete the mycelial growth after spawning were 28, 22, 10 and 9 days, respectively, when the 2%(V/V) of solid spawn and 2%(V/V), 5% (V/V) and 10%(V/V) of liquid spawn were inoculated. The days required from spawning to fruiting bodies were 38, 34, 28 and 27 days.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.719-721
• /
• 2009

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.2
• /
• pp.75-82
• /
• 2022

Automated vehicles (AVs) are coming to our roadways. In practice, there are still several challenges that can impede the AV sensors are polluted on various road conditions. In this paper, we propose a strategy for V2E performance assurance technology using Kano model. We are developing the vehicle sensor cleaning system about the three types of commonly used sensors: camera, radar, and LiDAR. Surveys were carried out in 30 AV's experts on quality characteristics about V2E performance assurance technology. As a result, the Kano model developed to verify a major requirement of autonomous vehicle's sensor cleaning system. It is expected that the Kano model will be actively used to verify the importance of V2E development strategy.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.2
• /
• pp.199-207
• /
• 2002

The polycrystalline CdS of large scale were grown by chemical pyrolysis deposition for $Cu_2$S/CdS heterojunction solar cells. For high quality CdS polycrystalline thin films, the chemical solution was deposited on indium tin oxide(ITO) glasses at the temperature of 50$0^{\circ}C$ for 15 second and annealed at 35$0^{\circ}C$ for 20 minute or 50$0^{\circ}C$ for 30 second. To fabricate high efficiency solar cells, optical and electrical properties, morphology by SEM and x-ray diffraction on polycrystalline CdS thin films were investigated. From the I-V characteristics of $Cu_2$S/CdS heterojunction, the open circuit voltage, $V_{oc}$ was 0.7 V and the short circuit current, $I_{sc}$ was 4.2 mA. We found that the fill factor(FF) was 0.5 and the efficiency was 2.5%.

• Journal of Bio-Environment Control
• /
• v.16 no.2
• /
• pp.101-107
• /
• 2007

This experiment was carried out to develop the substrate mixtures for the production of high quality plug seedlings of cucumber. Peatmoss based substrates, rice hull, carbonized rice hull, decomposed sawdust, perlite and granular rockwool were mixed by five different mixing ratioes (M1, M2, M3, M4 and M5). The cultivars used were cucumber (Cucumis sativus L. cv. Janghyung heukjinju) plants. The higher the content of peatmoss added, the higher the plant growth in terms of plant height, leaf area and total dry weight, which leading to the production of high quality plug seedlings. Seedlings growth of cucumber were greater in M5 mixtures [peatmoss:rice hull:decomposed sawdust=40:40:20(v/v)], M4 mixtures [peatmoss:rice hull:decomposed sawdust:granular rockwool=30:25:20:25(v/v)] and M2 mixtures [peatmoss:rice hull:decomposed sawdust:granular rockwool=20:20:15:25:20(v/v)] The concentrations of nutrient solution (EC) had a great influence on plant height, leaf area, total fresh and dry weight of cucumber seedlings growth. As the concentration of nutrient solution increased from 0.1 to $1.5dS{\cdot}m^{-1}$, the growth and seedling quality of cucumber in plant height, leaf area and dry weight were significantly improved.

• ALGAE
• /
• v.30 no.2
• /
• pp.81-87
• /
• 2015

Recent studies have shown the importance of viruses as potential sources of plankton mortality, which affect primary production and biogeochemical functions of their hosts. Here, we report basic characteristics of a novel virus (Stephanopyxis palmeriana virus: SpalV) that causes lysis of a culture of the diatom S. palmeriana, which was isolated in Jaran Bay, Korea, in August 2008. SpalV is a round-shaped viral particle ~25-30 nm in diameter that propagates in its host's cytoplasm. In addition, it shows species-specific infectivity among the tested diatom species. The burst size and latent period are estimated to be roughly 92 infectious units $cell^{-1}$ and <80 h, respectively.

• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.47-54
• /
• 2015

This research was conducted to investigate the changes in moisture retention capacities of expanded rice-hull (ERH)-based root media and their influences on the growth of mother and daughter plants in vegetative propagation of 'Seolhyang' strawberry. The proportion of water at the container capacity of ERH medium was in the range of 20 to 23%. This range was lower than the 60 to 66% of strawberry-specialized medium, the 30 to 34% of soil mother material (SMM) and the 30 to 35% of loamy sand. The moisture content of ERH was reduced to 10 to 12% at 8 hours after irrigation, and there were large variations among replications of ERH medium. Among four kinds of root media formulated to contain ERH, the medium of ERH + coir dust (CD) (55 + 45%, v/v) had 26.5 and 32.5% water contents at 20 and 40 days after irrigation to daughter plants, respectively. The m edia o f ERH + sandy loam (S L) and E RH + S MM showed similar trends i n moisture r etention. The pH and EC i n the all root media tested were in the range of 6.7 to 7.1 and 0.03 to $0.08dS{\cdot}m^{-1}$, respectively. The pHs and ECs measured at 20 and 40 days after irrigation were not significantly different in each root medium. Among the root media formulated to contain ERH, the growth of daughter plants was the highest in the treatment of ERH + SL (55 + 45%, v/v). As the blending rate of coir dust was elevated in the ERH + CD media, moisture retention capacity increased gradually, but the growth of daughter plants became worse even though the medium showed higher moisture retention capacity than other root media tested. The growth of roots and aboveground tissues of daughter plants deteriorated in the root media formulated by blending ERH + perlite (PE) at various ratios. The results of this research suggest the optimum formulations of root media and management of moisture content in raising of strawberry daughter plants when ERH is a component of root media.

• Food Science and Preservation
• /
• v.9 no.2
• /
• pp.240-247
• /
• 2002

This study, to enhance the sterilization, browning inhibition and precooling effect of electrolyzed oxidizing water(EOW) as cleaning water on food industry, was carried out to investigate the efficacy of electrolyzed oxidizing water(EOW) with 0.85% NaCl, 0.5% ethanol, polysorbate 80 of 1 ppm, 0.5% lemon juice and 0.5% citron juice. Escherichia coli KCTC 1039 with initial count of 5.63$\times$10$\^$8/ CFU/mL were reduced to <10$^1$CFU/mL after 15∼30 sec when it was treated by electrolyzed oxidizing water added with various food additives. Bacillus cereus KCTC 1012 were reduced to <10$^1$ CFU/mL after 2 minutes treatment with electrolyzed oxidizing water containing polysorbate 80 and ethanol. Iactobacillus plantarum KCTC 3108 were reduced to <10$^1$CFU/mL after 30 sec treatment with electrolyzed oxidizing water containing polysorbate 80, citron juice and lemon juice, respectively. Erwinia carotovora subsp. carotovora KCTC 2776 were reduced to <10$^1$CFU/mL after 30 sec treatment with electrolyzed oxidizing water containing polysorbate 80 and lemon juice. Browning inhibition effect was determined by comparison of polyphenol oxidase activity. Inhibition ratio of polyphenol oxidase was approximately 62∼84% in most treatments with the exception of 57% and 25% inhibition by 0.5% ascorbic acid and polysorbate 80, respectively. Sliced potato dipped in electrolyzed oxidizing water containing NaCl and citron juice for 30 minutes showed significantly low PPO activity, 64 units in treatment with NaCl and 91 units in treatment with citron juice. At the same time, changes in color value(△E) of sliced potato was below 3 in most treatments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.258-258
• /
• 2016

최근 디스플레이 산업의 발전에 따라 고성능 디스플레이가 요구되며, 디스플레이의 백플레인 (backplane) TFT (thin film transistor) 구동속도를 증가시키기 위한 연구가 활발히 진행되고 있다. 트랜지스터의 구동속도를 증가시키기 위해 높은 이동도는 중요한 요소 중 하나이다. 그러나, 기존 백플레인 TFT에 주로 사용된 amorphous silicon (a-Si)은 대면적화가 용이하며 가격이 저렴하지만, 이동도가 낮다는 (< $1cm2/V{\cdot}s$) 단점이 있다. 따라서 전기적 특성이 우수한 산화물 반도체가 기존의 a-Si의 대체 물질로써 각광받고 있다. 산화물 반도체는 비정질 상태임에도 불구하고 a-Si에 비해 이동도 (> $10cm2/V{\cdot}s$)가 높고, 가시광 영역에서 투명하며 저온에서 공정이 가능하다는 장점이 있다. 하지만, 차세대 디스플레이 백플레인에서는 더 높은 이동도 (> $30cm2/V{\cdot}s$)를 가지는 TFT가 요구된다. 따라서, 본 연구에서는 차세대 디스플레이에서 요구되는 높은 이동도를 갖는 TFT를 제작하기 위하여, amorphous In-Ga-Zn-O (a-IGZO) 채널하부에 화학적으로 안정하고 전도성이 뛰어난 SnO2 채널을 얇게 형성하여 TFT를 제작하였다. 표준 RCA 세정을 통하여 p-type Si 기판을 세정한 후, 열산화 공정을 거쳐서 두께 100 nm의 SiO2 게이트 절연막을 형성하였다. 본 연구에서 제안된 적층된 채널을 형성하기 위하여 5 nm 두계의 SnO2 층을 RF 스퍼터를 이용하여 증착하였으며, 순차적으로 a-IGZO 층을 65 nm의 두께로 증착하였다. 그 후, 소스/드레인 영역은 e-beam evaporator를 이용하여 Ti와 Al을 각각 5 nm와 120 nm의 두께로 증착하였다. 후속 열처리는 퍼니스로 N2 분위기에서 $600^{\circ}C$의 온도로 30 분 동안 실시하였다. 제작된 소자에 대하여 TFT의 전달 및 출력 특성을 비교한 결과, SnO2 층을 형성한 TFT에서 더 뛰어난 전달 및 출력 특성을 나타내었으며 이동도는 $8.7cm2/V{\cdot}s$에서 $70cm2/V{\cdot}s$로 크게 향상되는 것을 확인하였다. 결과적으로, 채널층 하부에 SnO2 층을 형성하는 방법은 추후 높은 이동도를 요구하는 디스플레이 백플레인 TFT 제작에 적용이 가능할 것으로 기대된다.