• Korean Journal of Microbiology
• /
• v.41 no.1
• /
• pp.38-46
• /
• 2005

To determine the actual hygienic status of domestic chicken meats sold in public markets (conventional markets and department stores), microbial contamination levels (Total cells, Coliforms and Staphylococcal cells) and zoonotic pathogens (Salmonella species, Campylobacter species, Listeria species, and Staphylococcus aureus) isolation tests were conducted. Chicken meats and eggs tested were collected from the conventional markets (Si-Jang) and department-stores located in Seoul and Kyung-gi regions in 1996. In total cells and coliforms contamination tests, chicken meats sold in department stores were much lesser contamination status than those of Si-Jang, but staphylococcal cells level was much more higher than that of conventional markets. Salmonella isolation frequency was investigated as $68.8\%$, but Campylobacter jejuni and Listeria monocytogenes isolation frequency were appeared both $64.0\%\;and\;63.3\%$. In case of eggs sold in public markets, one of S. gallinarum strain $(0.7\%)$ was isolated only on the egg-shell part among the four-hundred and fourty-six. In comparison with foreign imported chicken meats, there were no big differences in microbial contamination status. On the other hand, both Salmonella and L. monocytogenes were isolated only in the chicken wings from Korea and China, but not from U.S.A. This data suggest that more hygienic control system in order to produce the safe and hygienic chicken meats and eggs is need in our country as soon as possible.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.24 no.5
• /
• pp.455-469
• /
• 2021

Purpose: The rs641738 C>T in membrane-bound O-acyltransferase domain-containing protein 7 (MBOAT7) is implicated, along with the rs738409 C>G polymorphism in patatin-like phospholipase domain-containing protein 3 (PNPLA3), in nonalcoholic fatty liver disease (NAFLD). The association of these polymorphisms and NAFLD are investigated in Hispanic children with obesity. Methods: Obese children with and without NAFLD were enrolled at a pediatric tertiary care health system and genotyped for MBOAT7 rs641738 C>T and PNPLA3 rs738409 C>G. NAFLD was characterized by the ultrasonographic presence of hepatic steatosis along with persistently elevated liver enzymes. Genetic variants and demographic and biochemical data were analyzed for the effects on NAFLD. Results: Among 126 enrolled subjects, 84 in the case group had NAFLD and 42 in the control group did not. The two groups had similar demographic distribution. NAFLD was associated with abnormal liver enzymes and elevated triglycerides and cholesterol (p<0.05). Children with NAFLD had higher percentage of PNPLA3 GG genotype at 70.2% versus 31.0% in non-NAFLD, and lower MBOAT7 TT genotype at 4.8% versus 16.7% in non-NAFLD (p<0.05). PNPLA3 rs738409 C>G had an additive effect in NAFLD; however, MBOAT7 rs641738 C>T had no effects alone or synergistically with PNPLA3 polymorphism. NAFLD risk increased 3.7-fold in subjects carrying PNPLA3 GG genotype and decreased in MBOAT7 TT genotype. Conclusion: In Hispanic children with obesity, PNPLA3 rs738409 C>G polymorphism increased the risk for NAFLD. The role of MBOAT7 rs641738 variant in NAFLD is less evident.

• Microbiology and Biotechnology Letters
• /
• v.28 no.3
• /
• pp.167-171
• /
• 2000

Analysis of Production of Thermostable Alkaline Protease using Thermoactinomyces sp. E79. Jung, Sang Won, Sung-Sik Park, Yong-Cheol Park" Tae Kwang Oh2, and Jin-Ho Seo*, Department of Food Science and Technology, Seoul National University, Suwon 441-744, Korea, 1lnterdisciplinary program [or Biochemical Engineering & Biotechnology, Seoul National Univer5it}~ Seoul 151 "7421 Koreal 2Microbial Enzyme RU, Korea Research Institute of Bioscience & Biotechnology, Po. Box 1151 Yusong, Taejon 305"6001 Korea - This research was undertaken to analyze fermentation properties of Thermoactinomyces sp. E79 for production of a thermostable alkaline protease, which is able to specifically hydrolyze defatted soybean meal (DSM) to amino acids. TIle optimum pH for cell growth and protease production was pH 6.7, Thermoactinomyces sp. E79 did not grow at pHlO Among carbon sources tested, soluble starch was the best for protease production, while glucose repressed protease production. Tryptone was found to be the best nitrogen source for cell growth and soytone was good tor protease production. Oxygen transfer rate played an important role in producing thermostable alkaline protease. Ma'<..imum values of 6.58 glL of dry cell weight and 43.0 UJmL of protease activity were obtained in a batch fermentation using a 2.5 L jar fermentor at 1.93 X 102 hr-l of volumetric oxygen transfer coeff'jcient (kLa). Addition of 200 mgIL humic acid to the growth medium resulted in 1.64 times higher protease activity and 1.77 times higher cell growth than the case without humic acid addition.

• Journal of Embryo Transfer
• /
• v.27 no.1
• /
• pp.57-62
• /
• 2012

Efficient oocyte activation is a key step for the success of nuclear transfer in cloning. Ionomycin sequentially combined with 6-DMAP is now widely used to activate normal oocytes for analytical studies of oocyte activation and to activate reconstructed oocytes after nuclear transfer. The present study investigated sources of oocytes, duration of ionomycin and 6-DMAP, laser and electric stimulation in goat oocyte activation in order to optimize the protocols. Goat ovaries were collected in individual abattoirs during the breeding season and were delivered to the laboratory within 6 h in saline with 100 IU/ml streptomycin and 0.05 mg/ml penicillin. The oocytes were denuded from the cumulus cell by pipetting with 0.2% hyaluronidase in PBS at 20~22 hr post maturation. Oocytes with the polar body were selected and assigned to four groups for parthenogenetic activation. To examine the effect of duration of ionomycin treatment, oocytes after 20~22 hr of maturation were treated with 2.5 uM ionomycin for 1 or 5 min times and then cultured in 2 mM 6-DMAP for 2 or 4 hr. The activated oocytes were cultured in mSOF at $38.5^{\circ}C$ in $CO_2$ 5%, $O_2$ 5% and $N_2$ 90% multi incubator. Cleavage and blastocyst development was observed at 48 hr and day 8 of culture $in$ $vitro$, respectively. Activation rates of oocytes exposed to ionomycin for 1 min(86.4%) were significantly higher than those treated for 5 min(74.3%) duration. This indicated that 1 min ionomycin treatment was most suitable for activation of goat oocytes. The duration of 6-DMAP treat duration was in 2 mM 6-DMAP for 2 hr after 1 min exposure to 2.5 uM ionomycin. The activation rate of oocytes incubated in 6-DMAP for 2 hour(82.5%) was significantly higher than those in oocytes treated with 4 hr(75.5%).

• Tuberculosis and Respiratory Diseases
• /
• v.41 no.4
• /
• pp.379-388
• /
• 1994

Background : In sleep apnea syndrome, arterial oxygen saturation($SaO_2$) decreases at a variable rate and to a variable degree for a given apneic period from patient to patient, and various kinds of cardiac arrythmia are known to occur. Factors supposed to affect arterial oxygen desaturation during apnea are duration of apnea, lung voulume at which apnea occurs, and oxygen consumption rate of the subject. The lung serves as preferential oxygen source during apnea, and there have been many reports related with the influence of lung volume on $SaO_2$ during apnea, but there are few, if any, studies about the influence of oxygen consumption rate of an individual on $SaO_2$ during breath holding or about the profile of arterial oxygen resaturation after breathing resumed. Methods : To investigate the changes of $SaO_2$ and heart rate(HR) during breath holding(BH) and rebreathing(RB) and to evaluate the physiologic factors responsible for the changes, lung volume measurements, and arterial blood gas analyses were performed in 17 healthy subjects. Nasal airflow by thermistor, $SaO_2$ by pulse oxymeter and ECG tracing were recorded on Polygraph(TA 4000, Gould, U.S.A.) during voluntary BH & RB at total lung capacity(TLC), at functional residual capacity(FRC) and at residual volume(RV), respectively, for the study subjects. Each subject's basal metabolic rate(BMR) was assumed on Harris-Benedict equation. Results: The time needed for $SaO_2$ to drop 2% from the basal level during breath holding(T2%) were $70.1{\pm}14.2$ sec(mean${\pm}$standard deviation) at TLC, $44.0{\pm}11.6$ sec at FRC, and $33.2{\pm}11.1$ sec at RV(TLC vs. FRC, p<0.05; FRC vs. RV, p<0.05). On rebreathing after $SaO_2$ decreased 2%, further decrement in $SaO_2$ was observed and it was significantly greater at RV($4.3{\pm}2.1%$) than at TLC($1.4{\pm}1.0%$)(p<0.05) or at FRC($1.9{\pm}1.4%$)(p<0.05). The time required for $SaO_2$ to return to the basal level after RB(Tr) at TLC was not significantly different from those at FRC or at RV. T2% had no significant correlation either with lung volumes or with BMR respectively. On the other hand, T2% had significant correlation with TLC/BMR(r=0.693, p<0.01) and FRC/BMR (r=0.615, p<0.025) but not with RV/BMR(r=0.227, p>0.05). The differences between maximal and minimal HR(${\Delta}HR$) during the BH-RB manuever were $27.5{\pm}9.2/min$ at TLC, $26.4{\pm}14.0/min$ at RV, and $19.1{\pm}6.0/min$ at FRC which was significantly smaller than those at TLC(p<0.05) or at RV(p<0.05). The mean difference of 5 p-p intervals before and after RB were $0.8{\pm}0.10$ sec and $0.72{\pm}0.09$ sec at TLC(p<0.001), $0.82{\pm}0.11$ sec and $0.73{\pm}0.09$ sec at FRC(p<0.025), and $0.77{\pm}0.09$ sec and $0.72{\pm}0.09$ sec at RV(p<0.05). Conclusion Healthy subjects showed arterial desaturation of various rates and extent during breath holding at different lung volumes. When breath held at lung volume greater than FRC, the rate of arterial desaturation significantly correlated with lung volume/basal metabolic rate, but when breath held at RV, the rate of arterial desaturation did not correlate linearly with RV/BMR. Sinus arrythmias occurred during breath holding and rebreathing manuever irrespective of the size of the lung volume at which breath holding started, and the amount of change was smallest when breath held at FRC and the change in vagal tone induced by alteration in respiratory movement might be the major responsible factor for the sinus arrythmia.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1164-1173
• /
• 1996

Treating methods and characteristics of waste from a nuclear fuel powder conversion plant were studied. To recovery or treat a trace uranium in liquid waste, the ammonium uranyl carbonate(AUC) filtrate must be heated for $CO_2$ expelling, essentially. Uranium content of final treated waste solution from fuel powder processes for a heavy water reactor(HWR) could be lowered to 1 ppm by the lime treatment after the ammonium di-uranate(ADU) precipitation by simple heating. Otherwise, in case of the waste from fuel powder processes for a pressurized light water reactor(PWR), it is result in 0.8 ppm as a form of uranium peroxide such as $UO_4{\cdot}2NH_4F$ compounds. Optimum condition was found at $101^{\circ}C$ by the simple heating method in case of HWR powder process waste. And in case of PWR powder process waste, optimum condition could be obtained by precipitating with adding hydrogen peroxide and adjusting at pH 9.5 with ammonia gas at $60^{\circ}C$ after heating the waste In order to expelling $CO_2$. As the characteristics of recovered uranium compounds, median particle size of ADU was increased with pH increasing in case of HWP waste. Also, in case of uranium proxide compound recovered from PWR waste, the property of $U_3O_8$ power obtained after thermal treatment in air atmosphere was similar to that of the powder prepared from AUC conversion plant.

• Journal of the Korean Ceramic Society
• /
• v.41 no.10 s.269
• /
• pp.749-755
• /
• 2004

Fluosilicic acid ($H_2SiF_6$) is recovered as aqueous solution which absorbs $SiF_4$ produced from the manufacturing of industrial-graded $H_3PO_4$ or HF. Generally, fluosilicate salts prepared by the reaction between $H_2SiF_6$ and metal salts. Addition of fluosilicate salts to cement endows odd properties through unique chemical reaction with the fresh and hardened cement. In this study, two-component fluosilicate salt based chemical admixtures (MZ) of $4\%,\;6\%$, and $8\%$ concentration were prepared by the reaction of $H_2SiF_6$ ($25\pm2\%$) and metal salts. The effect of concentration of MZ at a constant adding ratio on the hydration and watertightness of cement were investigated respectively. In a cement containing MZ, metal fluorides such as $CaF_2$ and soluble silica by hydrolysis were newly formed during hydration. The total porosity of the hardened cement was lower in the presence of U because of packing role of metal fluoride and pozzolanic reaction of soluble $SiO_2$. Consequently, the watertightness of the hardened paste containing MZ was more improved than non-added (plain) due to an odd hydration between cement and MZ.

• The Korean Journal of Physiology and Pharmacology
• /
• v.26 no.6
• /
• pp.531-540
• /
• 2022

Group 1 metabotropic glutamate receptors (mGluRs) can positively affect postsynaptic neuronal excitability and epileptogenesis. The objective of the present study was to determine whether group 1 mGluRs might be involved in synaptically-induced intracellular free Ca²⁺ concentration ([Ca²⁺]_i) spikes and neuronal cell death induced by 0.1 mM Mg²⁺ and 10 µM glycine in cultured rat hippocampal neurons from embryonic day 17 fetal Sprague-Dawley rats using imaging methods for Ca²⁺ and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays for cell survival. Reduction of extracellular Mg²⁺ concentration ([Mg²⁺]_o) to 0.1 mM induced repetitive [Ca²⁺]_i spikes within 30 sec at day 11.5. The mGluR5 antagonist 6-Methyl2-(phenylethynyl) pyridine (MPEP) almost completely inhibited the [Ca²⁺]_i spikes, but the mGluR1 antagonist LY367385 did not. The group 1 mGluRs agonist, 3,5-dihydroxyphenylglycine (DHPG), significantly increased the [Ca²⁺]_i spikes. The phospholipase C inhibitor U73122 significantly inhibited the [Ca²⁺]_i spikes in the absence or presence of DHPG. The IP₃ receptor antagonist 2-aminoethoxydiphenyl borate or the ryanodine receptor antagonist 8-(diethylamino)octyl 3,4,5-trimethoxybenzoate also significantly inhibited the [Ca²⁺]_i spikes in the absence or presence of DHPG. The TRPC channel inhibitors SKF96365 and flufenamic acid significantly inhibited the [Ca²⁺]_i spikes in the absence or presence of DHPG. The mGluR5 antagonist MPEP significantly increased the neuronal cell survival, but mGluR1 antagonist LY367385 did not. These results suggest a possibility that mGluR5 is involved in synaptically-induced [Ca²⁺]_i spikes and neuronal cell death in cultured rat hippocampal neurons by releasing Ca²⁺ from IP₃ and ryanodine-sensitive intracellular stores and activating TRPC channels.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.15-15
• /
• 2011

As you know, boron compounds, borax ($Na_2B_4O_5(OH)_4{\cdot}8H_2O$) etc. were known thousands of years ago. As for natural boron, it has two naturally occurring and stable isotopes, boron 11 ($^{11}B$) and boron 10 ($^{10}B$). The neutron absorption $^{10}B$ is included about 19~20% with 80~81% $^{11}B$. Boron is similar to carbon in its capability to form stable covalently bonded molecular networks. The mass difference results in a wide range of ${\beta}$ values between the $^{11}B$ and $^{10}B$. The $^{10}B$ isotope, stable with 5 neutrons is excellent at capturing thermal neutrons. For example, it is possible to decrease a thermal neutron required for the nuclear reaction of uranium 235 ($^{235}U$). If $^{10}B$ absorbs a neutron ($^1n$), it will change to $^7Li+^1{\alpha}$ (${\alpha}$ ray, like $^4He$) with prompt ${\gamma}$ ray from $^{11}B$ $^{11}B$ (equation 1). $$^{10}B+^1n\;{\rightarrow}\;^{11}B\;{\rightarrow}\; prompt \;{\gamma}\;ray (478 keV), \;^7Li+4{\alpha}\;(4He)\;\;\;\;{\cdots}\; (1)$$ If about 1% boron is added to stainless steel, it is known that a neutron shielding effect will be 3 times the boron free steel. Enriched boron or $^{10}B$ is used in both radiation shielding and in boron neutron capture therapy. Then, $^{10}B$ is used for reactivity control and in emergency shutdown systems in nuclear reactors. Furthermore, boron carbide, $B_4C$, is used as the charge of a nuclear fission reaction control rod material and neutron cover material for nuclear reactors. The $B_4C$ powder of natural B composition is used as a charge of a control material of a boiling water reactor (BWR) which occupies commercial power reactors in nuclear power generation. The $B_4C$ sintered body which adjusted $^{10}B$ concentration is used as a charge of a control material of the fast breeder reactor (FBR) currently developed aiming at establishment of a nuclear fuel cycle. In this study for new boron compound, silicon boride ceramics for capturing thermal neutrons, preparation and characterization of both silicon tetraboride ($SiB_4$) and silicon hexaboride ($SiB_6$) and ceramics produced by sintering were investigated in order to determine the suitability of this material for nuclear power generation. The relative density increased with increasing sintering temperature. With a sintering temperature of 1,923 K, a sintered body having a relative density of more than 99% was obtained. The Vickers hardness increased with increasing sintering temperature. The best result was a Vickers hardness of 28 GPa for the $SiB_6$ sintered at 1,923K for 1 h. The high temperature Vickers hardness of the $SiB_6$ sintered body changed from 28 to 12 GPa in the temperature range of room temperature to 1,273 K. The thermal conductivity of the SiB6 sintered body changed from 9.1 to 2.4 W/mK in the range of room temperature to 1,273 K.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.345-345
• /
• 2014

최근 디스플레이 기술은 급속도로 발전해 가고 있다. 정보화 기술의 발전으로 언제 어디서나 쉽게 정보를 얻을 수 있는 유비쿼터스 시대로 접근하고 있으며, 휴대가 간편하고 이동성을 가진 휴대용 기기가 인기를 끌고 있다. 이에 따라 더 얇고 더 가벼우며 휴대하기 쉬운 디스플레이가 요구 되고 있고, 더 나아가 떨어뜨려도 깨지지 않고 유연하며, 디자인 변형이 자유로우며, 때론 종이처럼 접거나 휘어지거나 두루마리처럼 말을 수 있는 이른바 "플렉서블 디스플레이"에 대한 필요성이 점점 대두되고 있다. 이러한 첨단 디스플레이의 핵심 소자 중 하나는 산화물 박막 트랜지스터 이다. 산화물 반도체는 넓은 밴드갭을 가지고 가시광선 영역에서 투명하며, 높은 이동도를 가지고 있어 차세대 평판디스플레이, 투명디스플레이 및 플렉서블 디스플레이용 박막트랜지스터(TFT)를 위한 채널층으로써 광범위하게 연구되고 있다. 하지만 현재 대부분의 산화물 박막 트랜지스터 제조 공정은 고온에서의 열처리를 필요로 한다. 고온에서의 열처리 공정은 산화물 박막의 제조 공정 단가를 증가시키는 문제점이 있으며, 산화물 박막이 형성되는 기판의 녹는점이 낮은 경우에는 상기 기판의 변형을 가져오므로(예를 들면, 플라스틱 기판, 섬유 기재 등), 상기 산화물 박막이 적용되는 기판의 종류에 제한이 생기는 문제점이 있었다. 이에 플렉시블 디스플레이 등을 위해서는 저온공정이 필수로 선행 되어야 한다. 산화물 TFT는 당초, ZnO계의 재료가 연구되었지만 2004년 말에 Hosono 그룹이 Nature지에 "IGZO (In, Ga, Zn, O)"을 사용한 TFT를 보고한 이후 IGZO, IZO, ISZO, IYZO, HIZO와 같은 투명 산화물반도체가 TFT의 채널물질로써 많이 거론되고 있다. 그 중에서 인듐갈륨 산화물(IGO)는 삼성분계 n-형 산화물 반도체이고, 채널 이동성이 좋고 광투과도가 우수해 투명 TFT에 매우 유용하게 사용할 수 있다. 이 실험에서 우리는 인듐갈륨 산화물 박막 및 트랜지스터 특성 연구를 진행하였다. 인듐갈륨 산화물 박막은 상온에서 rf-magnetron sputtering법을 사용하여 산소분압 1~10%에서 증착 되었다. 증착된 인듐갈륨 산화물 박막은 cubic $In_2O_3$ 다결정으로 나타났으며, 2차상은 관찰 되지 않았다. 산소분압이 10%에서 1%로 변함에 따라 박막의 전도도는 $2.65{\times}10^{-6}S/cm$에서 5.38S/cm 범위에서 조절되었으며, 이를 바탕으로 인듐갈륨 박막을 active층으로 사용하는 bottom gate 구조의 박막트랜지스터를 제작 하였다. 인듐갈륨산화물 박막트랜지스터는 산소분압 10%에서 on/off 비 ${\sim}10^8$, field-effect mobility $24cm^2/V{\cdot}S$를 나타내며 상온에서 플렉서블용 고 이동도 소자 제작의 가능성을 보여준다.