• 제목/요약/키워드: $TiO_2-_xN_x$

검색결과 386건 처리시간 0.032초

Emission and Structural Properties of Titanium Oxide Nanoparticles-coated a-plane (11-20) GaN by Spin Coating Method

  • Kim, Ji-Hoon;Son, Ji-Su;Baik, Kwang-Hyeon;Park, Jung-Ho;Hwang, Sung-Min
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.146-146
    • /
    • 2011
  • The blue light emitting diode (LED) structure based on non-polar a-plane (11-20) GaN which was coated TiO2 nanoparticles using spin coating method was grown on r-plane (1-102) sapphire substrates to improve light extraction efficiency. We report on the emission and structural properties with temperature dependence of photoluminescence (PL) and x-ray rocking curves (XRC). From PL results at 13 K of undoped GaN samples, basal plane stacking fault (BSF) and near band edge (NBE) emission peak were observed at 3.434 eV and 3.484 eV, respectively. We also found the temperature-induced band-gap shrinkage, which was fitted well with empirical Varshini's equation. The PL intensity of TiO2 nanoparticles ?coated multiple quantum well (MQW) sample is decayed slower than that of no coating sample with increasing temperature. The anisotrophic strain and azimuth angle dependence in the films were shown from XRC results. The full width at half maximum (FWHM) along the GaN [11-20] and [1-100] directions were 564.9 arcsec and 490.8 arcsec, respectively. A small deviation of FWHM values at in-plane direction is attributed to uniform in-plane strain.

  • PDF

Excimer laser annealing of sol-gel derived PZT thin films

  • 도영호;강민규;오승민;강종윤;윤석진
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.20-20
    • /
    • 2010
  • The effect of excimer laser annealing on the structural and dielectric behaviors of $PbZr_{0.52}Ti_{0.48}O_3$ (PZT) thin films has been investigated. The amorphous PZT thin films were prepared on Pt/Ti/$SiO_2$/Si substrates by a sol-gel method. The PZT precursor was prepared from lead acetate, zirconium acetylacetonate, and titanium isopropoxide. The starting materials were dissolved in n-propanol and 1,3-propanediol. After, the amorphous PZT thin films were laser-annealed (using KrF excimer laser) as a function of the laser energy density and the number of laser pulse. Structural properties of PZT thin films are characterized by using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The dielectric characterization was done on a RT66A test system and a Agilent 4294A impedance analyzer. The PZT thin films show that excimer laser irradiation drastically improved the crystallization and dielectric properties of the PZT thin films, depending on the energy density and the pulse number.

  • PDF

백두산 화산군 환경과 동굴 암석의 년대측정 및 성분분석

  • 김경훈
    • 동굴
    • /
    • 제34권35호
    • /
    • pp.32-42
    • /
    • 1993
  • The Paektu-san mountains are geographically situated in the Korea strait to the north of the main peninsula, coordinated between the longitudes of W(127$^{\circ}$15'~128$^{\circ}$00')and E(128$^{\circ}$15'~129$^{\circ}$00'), and between the latitudes of S(41$^{\circ}$15'~42$^{\circ}$00') and N(42$^{\circ}$10'~42$^{\circ}$40'). The volcanic group of the Paektu-san mountains can be devided into 2 main kinds of volcanos by the method investigation, The ashes are mainly made of tremolite, trachte, basalt and pumice, or, a little quartz, labradorite and volcanic glass. These sorts, ratios and forms of the rocks are respectively similar. The Haeven lake is surrounded by 19 peaks. The central volcanic cone is a secant cone in shape, with an altitude of the 1800m to 2749,2m (Chang-kun-bong), an average diameter of 10km, and a shape of an ellipse seen high from the plane. They say there were several eruptions in 1668, 1700 and 1702 A. D. The crystal structure of the rock sample collected at the cave of Mt. Paektu-san is monoclinic. The quantitative analysis of the rock samples in the cave is done by using XRF this time. The chemical compositions by XRF fundamamental parameter analysis is : SiO$_2$: 50.72Wt%, TiO = 2.422Wt%, $Al_2$O$_3$= 17.65Wt%, Fe$_2$O$_3$= 9.371Wt%, CaO = 8.711Wt%, MgO = 4.l19Wt%, MnO = 0.l15Wt%, $K_2$O = 1.369Wt%, Na$_2$O : 3.028Wt% and P$_2$O$_{5}$ = 0.365Wt%. The K-Ar age of the rock sample is also determined to be 0.16Ma. This paper describes some problems experienced in dating young volcanic rocks, and then discusses chemical compositions, X-ray fluorescence analyses and the age of the formation of a lava tunnel such as in Mt. Paektu-san.n.

  • PDF

Ar 이온빔 식각과 전자선리소그래피 방벙으로 제작한 고온초전도 조셉슨 접합 (Fabrication of High-T$_c$ Superconducting Josephson Junctions by Ar lon Milling and E-Beam Lithography)

  • 이문철;김인선;이정오;유경화;박용기;박종철
    • 한국초전도학회:학술대회논문집
    • /
    • 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
    • /
    • pp.91-94
    • /
    • 1999
  • A new type of high-T$_c$ superconducting Josephson junctions has been prepared by Ar ion beam etching and electron beam lithography. YBa$_2Cu_3O_{7-x}$ (YBCO) films deposited on (001) SrTiO$_3$ single crystal substrate by pulsed laser deposition were patterned by Ar ion milling with photolithography. The narrow slit with a electroresist mask, about 1000 ${\AA}$ wide, was constructed over a 3 ${\sim}$ 5 ${\mu}$m bridge of a 1200-${\AA}$-thick YBCO film by electron beam lithography. The slit was then etched by the Ar ion beam to form a damaged 600-${\AA}$-thick YBCO. Thus prepared structure forms an S-N-S (YBCO - damaged YBCO - YBCO) type Josephson junctions. Those junctions exhibit RSI-like I-V characteristics at 77 K. The properties of the Josephson junctions such as I$_c$ R$_N$, and J$_c$ were characterized.

  • PDF

Pd 촉매상에서 일산화탄소 존재 하 수소의 선택적 산화반응: 담체 효과 (Selective Oxidation of Hydrogen Over Palladium Catalysts in the Presence of Carbon Monoxide: Effect of Supports)

  • 김은정;강동창;신채호
    • Korean Chemical Engineering Research
    • /
    • 제55권1호
    • /
    • pp.121-129
    • /
    • 2017
  • $TiO_2$, $Al_2O_3$, $ZrO_2$, $SiO_2$와 같은 다양한 담체에 습식함침법을 이용하여 Pd 기반 촉매를 제조하여 일산화탄소 존재하에 수소의 선택적 산화반응에 적용하였다. 제조된 촉매는 물리화학적 특성을 알아보기 위하여 XRD, $N_2$ 흡착, CO-, (CO+$H_2O$)-TPD, CO-TPR, XPS등의 특성분석을 수행하였다. CO-TPD와 (CO+$H_2O$)-TPD를 통해 $CO_2$ 탈착에 대한 $H_2O$의 영향을 알아보았으며 이러한 TPD 결과는 $H_2/CO$ 전환율과 상관관계가 있음을 확인하였다. 사용된 촉매 중에서 $Pd/ZrO_2$$H_2$ 전환율 측면에서 가장 활성이 좋은 것으로 나타났다. $H_2O$가 첨가된 선택적 $H_2$ 산화반응에서는 $H_2O$, CO, $H_2$가 경쟁흡착을 하였으며, 첨가된 $H_2O$가 CO 및 $H_2$의 반응을 촉진시켰다.

『춘추』 경문에서의 묘(廟)·궁(宮) 언급을 통한 주대(周代)의 그 쓰임 사례 일고찰 - 주대의 묘수제(廟數制) 실재 여부에 대한 궁구 과정에서 【1/2】- (A Study on the Usage of Miào(廟) and Gōng(宮) in Zhou Dynasty through the Mentions to Them in the Scripture Sentences of 『Chūn-qiū(春秋)』 - In the Process of Investigating the Existence of Zhou Dynasty's System to Regulate the Number of Zōng-miào(宗廟) 【1/2】)

  • 서정화
    • 한국철학논집
    • /
    • 제57호
    • /
    • pp.57-90
    • /
    • 2018
  • 본 논의에서는 주대(周代) 묘수제(廟數制)의 존재 여부를 확인하기 위한 방편으로 "춘추"의 기록 속에 나타나는 '묘'와 '궁'에 대한 집중적인 고찰을 시도하였다. 경문 내용이 구체적이지 않은 부분들은 "좌전"의 글과 기타자료들을 통해 사건의 맥락을 확인하였다. "춘추" 경문에서의 '묘(廟)'자의 쓰임 사례에서 주목할 만한 사항으로는 다음과 같다. 노나라의 태묘에서는 범국가적인 행사[事]와 제왕의 정치적인 제사 의례인 체(?) 의례를 이행하였고, 또 그와 같은 의례에 쓰이는 화려한 예기(禮器)를 구비하였다. 당대 군주의 종묘에서는 조정 의례인 조(朝)의례를 이행하였다. '궁(宮)'자의 쓰임 사례는 다음과 같다. 군주 개인의 가족이 기거했던 궁에서 그를 위한 가족 제사를 이행하였다. 노나라 삼환씨(三桓氏)의 정치적 거점이라 할 수 있는 환궁(桓宮)을 화려하게 장식한 기록이 눈에 띈다. 희공(僖公) 재위 시에 있었던 서궁(西宮)과 성공(成公) 3년에 화재로 소실된 신궁(新宮) 등은, 그것이 예궁(?宮)일 것이라는 한대 이후에 형성된 관점과는 달리, 양공(襄公)이 좋아했던 초궁(楚宮)과도 같은 군주의 또 다른 집이었을 것으로 추정한다. '무궁을 세우고'[立武宮] '양궁을 세웠다'[立煬宮]고 하는 기록은, 어떠한 건축물에 '무(武)'와 '양(煬)'이라고 하는 상징성을 부여해 설립하여 제후가 그곳의 위(位)에 서는 행사가 이어진 것임을 논하였다. 따라서 이것은 무공(武公)이나 양공(煬公) 등의 선군을 위한 당대 군주의 효성스러운 제사 이행이 주된 목적이 아니라, 그 의례를 통해 얻는 특정의 정치적 상징성을 드러내고자 한 것이었다. 이러한 상징성은 환궁(桓宮)과 희궁(僖宮)에서 가장 극명하게 나타난다. 결과적으로, 경문에서의 모든 묘와 궁들은 일정 부분 사당(祠堂)의 기능이 있긴 하지만, '천자7묘'나 '제후5묘'라는 묘수제의 규정에 맞추기 위해 사당으로서 조성한 건축물이 결코 아니었음을 확인하였다.

Development of Eco-Friendly Ag Embedded Peroxo Titanium Complex Solution Based Thin Film and Electrical Behaviors of Res is tive Random Access Memory

  • Won Jin Kim;Jinho Lee;Ryun Na Kim;Donghee Lee;Woo-Byoung Kim
    • 한국재료학회지
    • /
    • 제34권3호
    • /
    • pp.152-162
    • /
    • 2024
  • In this study, we introduce a novel TiN/Ag embedded TiO2/FTO resistive random-access memory (RRAM) device. This distinctive device was fabricated using an environmentally sustainable, solution-based thin film manufacturing process. Utilizing the peroxo titanium complex (PTC) method, we successfully incorporated Ag precursors into the device architecture, markedly enhancing its performance. This innovative approach effectively mitigates the random filament formation typically observed in RRAM devices, and leverages the seed effect to guide filament growth. As a result, the device demonstrates switching behavior at substantially reduced voltage and current levels, heralding a new era of low-power RRAM operation. The changes occurring within the insulator depending on Ag contents were confirmed by X-ray photoelectron spectroscopy (XPS) analysis. Additionally, we confirmed the correlation between Ag and oxygen vacancies (Vo). The current-voltage (I-V) curves obtained suggest that as the Ag content increases there is a change in the operating mechanism, from the space charge limited conduction (SCLC) model to ionic conduction mechanism. We propose a new filament model based on changes in filament configuration and the change in conduction mechanisms. Further, we propose a novel filament model that encapsulates this shift in conduction behavior. This model illustrates how introducing Ag alters the filament configuration within the device, leading to a more efficient and controlled resistive switching process.

졸-겔법에 의한 강유전성 PZT 박막의 제작 (The Fabrication of Ferroelectric PZT thin films by Sol-Gel Processing)

  • 이병수;정무영;유도현;김용운;이상희;이능헌;지승한;박상현;이덕출
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
    • /
    • pp.93-96
    • /
    • 2002
  • In this study, PZT thin films were fabricated using sol-gel processing onto Si/$SiO_2$/Ti/Pt substrates. PZT sol with different Zr/Ti ratio(20/80, 30/70, 40/60, 52/48) were prepared, respectively. The films were fabricated by using the spin-coating method on substrates. The films were heat treated at $450^{\circ}C$, $650^{\circ}C$ by rapid thermal annealing(RTA). The preferred orientation of the PZT thin films were observed by X-ray diffraction(XRD), and Scanning electron microscopy(SEM). All of the resulting PZT thin films were crystallized with perovskite phase. The fine crystallinity of the films were fabricated. Also, we found that the ferroelectric properties from the dielectric constant of the PZT thin films were over 600 degrees, P-E hysteresis constant. And the leakage current densities of films were lower than $10^{-8}A/cm^2$. It is concluded that the PZT thin films by sol-gel process to be convinced of application for ferroelectric memory device.

  • PDF

광주.전남지역 목조 고건축물에 사용된 단청안료에 대한 연구 (A Study on Dancheong Pigments of Old Wooden Building in Gwangju and Jeonnam, Korea)

  • 장승욱;박영석;박대우;김종균
    • 자원환경지질
    • /
    • 제43권3호
    • /
    • pp.269-278
    • /
    • 2010
  • 우리는 단청안료의 착색제에 대한 특성을 살펴보았고, 이번 연구가 우리 전통 단청의 색을 재현하는데 기여하길 바란다. 광주 전남지역 목조 고건축물에서 자연적으로 박리가 일어난 부분의 단청안료 시료를 채취하고, 이를 XRD와 EDS-SEM분석을 이용하여 착색제를 분석하였다. 백색안료에서는 고대부터 착색제로 사용되어온 석고$(CaSO_4{\cdot}2H_{2}O)$,석영$(SiO_2)$, 백연석$(PbCO_3)$ 및 호분$(CaCO_3)$과 현대에서 많이 사용되는 산화지당$(TiO_2)$이 모든 시료에서 확인되었다. 적색안료에서는 고대부터 착색제로 사용된 석간주$(Fe_{2}O_{3})$와 연단$(Pb_{3}O_{4})$ 및 현대안료 착색제인 C. I. pigment orange $13(C_{32}H_{24}C_{12}N_{8}O_{2})$이 확인 되었지만, 진사(cinnabar, HgS)는 관찰되지 않았다. 황색안료에서는 납을 주성분으로 하는 황연인 홍연석$(PbCrO_4)$과 고대부터 사용된 밀타승(PbO)이 확인되었다. 청색안료에서는 착색제인 소달라이트 $(Na_{4}BeAlSi_{4}O_{12}Cl)$와 노제안$(Na_{8}Al_{6}Si_{6}O_{24}SO_{4})$이 확인되었으며, 현대안료 착색제인 C. I. pigment blue $29(Na_{7}Al_{6}Si_{6}O_{24}S_{3})$ 도 확인되었다. 녹색안료에서는 착색제로 카루머타이트(calumetite, $Cu(OHCI)_{2}{\cdot}2H_{2}O$), 에스콜라이트$(Cr_{2}O_{3})$, 디크롬트리옥사이드(dichromium trioxide, $Cr_{2}O_{3}$), 에머랄드그린$(C_{2}H_{3}As_{3}Cu_{2}O_{8})$ 및 현대안료 착색제인 C. I. pigment green$(C_{32}H_{16}-XCl_{x}Cu_{8})$이 확인되었다. 흑색안료에서는 먹(송연)이 확인 되었다.

OMC Nano-emulsion을 포집하고 있는 Nano-TiO$_2$-Paste의 합성과 화장품의 응용 (Inorganic-organic nano-hybrid; Preparation of Nano-sized TiO$_2$ Paste Trapped OMC Nano-emulsion and it's Application for Cosmetics)

  • Byung Gyu, Park;Jong Heon, Kim;Jin Hee, Im;Kyoung Chul, Lee
    • 대한화장품학회지
    • /
    • 제30권2호
    • /
    • pp.181-187
    • /
    • 2004
  • 화장품에서 유기 화합물인 OMC(octyl methoxy cinnamate)와 무기 소재인 TiO$_2$가 자외선 차단제로 가장 보편적으로 사용되고 있다. 그러나 OMC는 skin trouble이 있고, TiO$_2$는 첨가량에 비해서 자외선 차단 효율이 OMC보다 낮고 입자의 크기효과에 의해 백탁 현상이 나타나는 단점이 있다. 본 연구에서는 이러한 두 성분이 갖는 단점을 보완하는 방법으로 OMC를 나노에멀젼시키고, 이 나노에멀젼-OMC를 나노-TiO$_2$ 미립자로 포접하여 자외선 차단효과를 극대화 하면서, 피부에 OMC가 직접적으로 적용하지 못하도록 하는 방법을 연구하였다. 특히 계면활성제를 boundary로 하는 유기/무기 hybrid nano-material에서 TiO$_2$ 미립자와 OMC-에멀젼이 나노 크기가 되면 백탁 현상이 나타나지 않는 투명한 화장품을 제조할 수 있을 뿐만 아니라 나노-에멀젼 OMC를 TiO$_2$로 포집하는 과정에서 hydrophilic character를 갖는 레시친으로 TiO$_2$를 안정화하여 보습성을 더욱 향상시켰다. 합성한 inorganic-organic hybrid nano-material는 TEM을 이용하여 나노 미립자의 morphologies를 규명하였고, UV-Visible spectrometer를 이용하여 자외선 흡수를 측정하였다. 또한 X-ray diffractometer를 이용하여 나노-에멀젼 OMC를 포집하고 있는 TiO$_2$ 미립자가 갖는 특성인 pore의 크기와 구조를 측정하였다. 화장품적인 응용으로서 SPF analyzer 측정결과 기존의 powder-OMC에 비하여 우수한 자외선 차단 효과를 나타내었으며, OMC의 피부 침투도 훨씬 줄일 수 있어 OMC의 피부 부작용을 크게 줄일 수 있을 것이다.>$\pm$0.06 $\mu$g/g 범위였다. 4. 날결명자 분말첨가군 각 조직에 축적된 카드뮴 함량이 제일 낮았던 C4를 Cl과 비교한 결과 뇌, 심장, 비장, 간, 폐, 고환, 신장, 대퇴부근육, 다리뼈에 각각 49.03, 22.56, 36.02, 35.75, 41.75, 36.20, 37.00, 22.77, 56.67 %의 감소를 보였으며, 각 장기의 함량은 뇌<다리뼈<대퇴부 근육<고환<폐<심장<비장<신장<간 순 이었다. 5. 카드뮴 총 섭취량으로 장기 및 조직의 카드뮴 평균함량에 대한 축적율은 카드뮴만 섭취한 군(Cl) 의 경우 7.14%이었으며, 결명자 분말 첨가군인 C2, C3, C4군의 경우 각각 4.91, 4.81, 4.50 %이었다. 6. 체모의 카드뮴 함량은 Cl군이 가장 높았고, 결명자 첨가군들의 카드뮴 함량은 6주째까지 모든 시험군에서 증가하는 경향을 보였으며, 6주 이후에는 감소되는 경향을 보였다. 7. 분변 중 카드뮴 함량은 C4군이 가장 높았고, 결명자 첨가군들의 카드뮴 함량은 C3군과 C4군을 제외한 나머지 군들에서 완만하게 증가하는 경향을 보였으며, 6주째에 카드뮴 함량이 감소되는 경향을 보였다가 6주 이후에 다시 카드뮴 함량이 증가하는 경향이었다.erefore the guidelines for iron supplementation and nutritional education to improve their iron status should be provided.한 질소제거를 N-balance로부터 구해보면, R3 반응조의 경우가 가장 높은 제거율(40.9%)을 보였다. 이상의 결과들을 볼 때, Bncillus 균주는 호기적 탈질을 일으킬 수 있는 가능성이 있고, Bncillus 균주를 이용한 B3 공정은 탈질에 이용되는 탄소량이 거의 없고, 적은 alkalinity 소모에 의한 경제적 이익 등 장점을 가진 공정으로 보여 진다.수록 푹신한 감이 있는