• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.213.1-213
• /
• 2003

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 추계학술발표강연 및 논문개요집
• /
• pp.83-83
• /
• 1998

• Current Photovoltaic Research
• /
• 제3권1호
• /
• pp.5-9
• /
• 2015

Absorption and luminescence characteristics of disperse red-19 (DR-19) and $TiO_2$ composite have been investigated with various poling electric field strengths. Two step synthetic processes were employed to employ the DR-19 to the $TiO_2$ sol-gel. Firstly, urethane bond formation between DR-19 (-OH) and 3-isocyanatopropyl triethoxysilane (ICPTES, -N=C=O) performed (ICPDR) prior incorporation to the $TiO_2$ sol-gel. Secondary, the hydrolysis of the ethoxy group from the ICPTES and condensation reaction between silanol groups from ICPTES and $TiO_2$ sol-gel were performed. The ICPDR and $TiO_2$ sol-gel ($DRTiO_2$) were mixed and stirred for several days. The composite was coated to the ITO coated glass substrate. Corona poling were performed before drying the composite with various electric field strengths. The absorption intensity decreased with the increase of the poling field strength, which resulted in the increase of poling efficiency. The photoluminescence also decreased as the poling field strength increased. There is long luminescence tail for the poled $DRTiO_2$ film compared with unpoled $DRTiO_2$ film. The luminescence long tail indicates that the self-trapped excitons and polarons were generated when the $DRTiO_2$ film was poled with electric field.

• 한국재료학회지
• /
• 제12권11호
• /
• pp.835-839
• /
• 2002

Metal-Ferroelectric-Metal(MFM) capacitors were prepared using $Bi_{3.3}$ $La_{0.7}$ $Ti_3$$O_{12}$ (BLT) ferroelectric thin films which were spin coated on $Pt/Ti/SiO_2$/Si substrates by the Sol-Gel method. BLT thin films annealed at above $650^{\circ}C$ showed polycrystalline structures with typical c-axis preferred orientation. The grain size and surface roughness were increased as the annealing temperature increased from $650^{\circ}C$ to $700^{\circ}C$. In addition, the full width at half maximum (FWHM) values were decreased with increasing annealing temperatures, indicating the improvement of crystallinity. The remanent polarization (2Pr= $Pr^{+}$ $+Pr^{-) }$ and leakage current of the BLT film annealed at $650^{\circ}C$ were about 29.3 $\mu$C/cm$^2$ and $2.3$\times$10^{-8}$$ A/cm^2$ at 3V. There were no distinct changes in the retention charges after $10^{10}$ polarization switching cycles, showing good fatigue property of the annealed BLT films.

• 공업화학
• /
• 제7권2호
• /
• pp.269-279
• /
• 1996

SOL-GEL법을 이용하여 $SiO_2-TiO_2-V_2O_5$계의 다공성 비정질 촉매를 그 제조변수를 달리하면서 제조 하였다. 이들 촉매들을 사용하여 "모조 배가스 합성 및 미량 촉매 반응기" 상에서 NO 제거 활성 측정을 통한 Screening test를 실시하여 가장 우수한 촉매 활성을 나타내는 최적의 입자상 촉매를 선정하였다. 또, 입자상 촉매의 제조변수에 입각하여 비활성, 기통성이 우수한 cordierite monolith 담체위에 활성성분을 SOL-GEL법으로 반복 coating하여 monolith형 촉매들을 제조하였으며, 이들을 전형적인 S. C. R.(Selective Catalytic Reduction of NOx) 공정에 해당되는 반응 조건하에서 NOx 및 SOx의 동시제거 효과를 측정해 보았다. 아울러 동촉매들의 특성화를 위해 DTA, TGA, BET, $NH_3$ 및 NO TPD, ESCA, XRD 등을 실시하여 보았다.

• 한국세라믹학회지
• /
• 제29권9호
• /
• pp.739-749
• /
• 1992

The sols prepared by dialyzing solutions, in which the hydrolyzed precipitates of TEOT or directly Ti(OC3H7)4 were resolved, were the nanoparticulate sol with the average particle size less than 7 nm and the anatase crystal phase. In the pH range of 1.5 to 2.9, the particle size of the nanoparticulate TiO2 sols (0.09 mol/ι) increased gradually upto 15 nm~26nm with the increase of pH in the initial aging state but the sols were transparent all the time, and stable without growin any more after 30 days. When the slipcasted porous alumina tubes were coated by the sol-gel dipping method, the minimum particle size and the aging time for forming the coated gel layer at the given pH were optimized. For obtaining the very thin crack-free and reproducible membrane coating, the use of a nanoparticulate TiO2 sol (0.09 mol/ι) aged for about 30 dyas at pH=2.0 was found to be the best.

• 한국결정성장학회지
• /
• 제19권5호
• /
• pp.256-261
• /
• 2009

Sol-gel법에 의해 친수성 투명 $TiO_2$ 박막이 제조되었고, 박막의 접촉각, 표면구조, 투과율의 특성이 측정되었다. 더욱이 박막의 친수 특성을 향상시키기 위하여 계면활성제 tween 80이 이용되었다. Tween 80의 첨가량이 0, 10, 30, 50wt%일 때, 제조된 박막의 접촉각은 각각 $41.4^{\circ}$, $18.2^{\circ}$, $16.0^{\circ}$, $13.2^{\circ}$로 확인되었다. 제조된 $TiO_2$ 박막은 자외선 조사 후 Methylene blue용액을 분해시켜 흡광도를 감소시키는 광촉매 특성을 보여주었다. 일반유리(bare glass), Antimony Tin Oxide(ATO)코팅 유리, Fluorine Tin Oxide(FTO)코팅유리, Indium Tin Oxide(ITO)코팅유리 기판 위 에 Tween 80을 30 wt% 함유한 $TiO_2$ 용액을 적층하여 박막의 접촉각과 투과율을 측정하였다. 다양한 기판에 제조된 박막은 $16.2\sim27.1^{\circ}$의 표면 접촉각을 나타냈으며 자외선 조사 후에는 접촉각이 $13.2\sim17.6^{\circ}$로 낮아졌다. 특히 ATO코팅유리와 FTO 코팅유리 기판 위에 코팅된 필름은 가시광선 영역에서 각각 74.6%, 76.8%의 높은 투과율을 나타내었고, 적외선 영역에서는 각각 54.2%, 40.4%의 낮은 투과율을 나타냈다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.110-110
• /
• 2000

Sol-Gel법은 산화물 전구체(precursor) 상태인 Sol상태로부터 가수분해, 중, 축합반응을 거쳐 최종적으로 Gel 산화물을 합성하는 방법이며 기존의 세라믹스를 합성할 수 있고 고순도의 균질한 화합물을 용이하게 얻을 수 있는 특징이 있다. 최근 전자부품이 소형, 경량화되는 추세에 따라 전자 세라믹스분야에서도 박막화가 대두되고 있는 가운데 Sol-Gel법은 dipping, spining 및 spray 법등을 이용하여 박막의 제작이 가능하며 CVD, PVD, sputtering 법등과 같은 박막제작에 비하여 장비가 복잡하지 않으면서 제작기법이 간단한 이점을 가지고 있다. 소재면에서 볼 때 TiO2 물질은 물리적, 화학적으로 안정하고 굴절율, 착샐율 및 반사율 등이 우수한 재료로서 세라믹스 콘센서, 압전소자, 습도센서와 가스센서분야등에 있어서 중요한 위치를 점하고 있어서 연구자들에게 많은 관심을 가지게 하였다. 본 연구에서는 Sol-Gel법에 의해 TiO2 Sol을 합성한 후 dipping 법으로 박막을 제작하고 박막의 전기전도 특성 및 습도센서소재로의 개발을 위해 습도감지특성에 주목하였고 경시변화로 인해 생성된 Gel powder의 물성에 대해서도 검토하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.517-520
• /
• 2001

The optical properties of $TiO_2$ thin films dispersed in epoxy film, which were prepared with bis-(4, 4'-P-toluenesulfonylacidic isoproplyidene) cycolhexadiol(BTSPC) and UVI 6990 in dry sol-gel process, were investigated. In the case of irradiating UV light on $TiO_2$ thin films, how many nanopartlcles of $TiO_2$ are dispersed in epoxy film was investigated by AFM. The absorption peak of the films was showed at 360nm. Squarylium dye was dispersed in $TiO_2$-epoxy film. Photodegration concerned with amount of dye and time of UV light irradiation was investigated. UV light irradiation on the film occurred dramatical photodegration.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.517-520
• /
• 2001

The optical properties of TiO$_2$ thin films dispersed in epoxy film, which were prepared with bits-(4,4'-P-toluenesulfonylacidic isoproplyidene) cycolhexadiol(BTSPC) and UVI 6990 in dry sol-gel process, were investigated. In the case of irradiating UV light on TiO$_2$ thin films, how many nanoparticles of TiO$_2$ are dispersed in epoxy film was investigated by AFM. The absorption peak of the films was showed at 360nm. Squarylium dye was dispersed in TiO$_2$-epoxy film. Photodegration concerned with amount of dye and time of UV light irradiation was investigated. UV light irradiation on the film occurred dramatical photodegration.